KTS AWR-US-U-100 Quick Start Manual

Agility White Space Radio (AWR)

Quick Start Manual

Model Number AWR-US-U-100

July 2012

Revision B.1

1

Quick Start Procedure

The KTS AWR White Space radio must be professionally installed by an authorized installer. The installer
must be authorized by KTS Wireless. The installation must be in accordance with 47 CFR Part 15,
Subpart H. Only the following components are approved for use with the radio.

 Power Supply: APX Technologies SP63P924R
 Antenna: Telex ALP-450

The AWR TVBD Element Manager software can be downloaded from the KTS Wireless website (see
below).

www.ktswireless.com

Click on Downloads and select AWR TVBD Element Manger software.

2

Install and configure Agility White Space Radio (AWR) as follows:

1. The AWR requires a 12-24 VDC input and consumes 6 Watts (RX) and 20 Watts (TX). Power is

supplied via Power over Ethernet (PoE).

External Interfaces –Ethernet (PoE) and Antenna Port

2. The AC power supply and PoE injector should be co-located in a weatherproof enclosure or

environmentally controlled building.

PoE Injector

3