Role
Name
Electronics
Thomas Steingreß
Revision
Reason
Date
Name
1
Initial version
07.12.2017
Thomas Steingreß
2
Components drawing added
CNR statement added
18.12.2017
Thomas Steingreß
3
Manufacturer address and Modelname
corrected
System drawing completed
21.12.2017
Thomas Steingreß
4
Antenna data added
IC number added
08.02.2017
Thomas Steingreß
5
Warning for Canada added
19.04.2017
Thomas Steingreß
Minda Immo641
Manual
1. General Info
Author
Minda Immo641
Manual
Change History
1
Minda Immo641
Manual
2. Index
1. General Info .................................................................................................................... 1
Author ........................................................................................................................... 1
Change History ............................................................................................................. 1
2. Index ............................................................................................................................... 2
3. Description ...................................................................................................................... 3
Ignition on ..................................................................................................................... 3
4. Technical Specification ................................................................................................... 4
Manufacturer ................................................................................................................ 4
Electrical features ......................................................................................................... 4
Mechanical featues ....................................................................................................... 4
5. Certifications ................................................................................................................... 5
USA ................................................................ .............................................................. 5
Canada ......................................................................................................................... 5
Taiwan .......................................................................................................................... 6
2
Minda Immo641
Manual
3. Description
The Immobilizer is an electronic device to avoid unauthorized engine start for motorcycles.
The system consists of
1. Antenna (integrated in the ignition lock)
2. Immobilizer unit
3. Key with RFID transponder (passive)
Ignition on
After turning the key in the lock to position „ON“ the Immobilizer is powered up and transmits a
radio frequency identification to the transponder in the key by the antenna. If the handshake
with the transponder has been successful (transponder is valid) the Immobilizer performs a
handshake with the engine control unit of the motorcycle via CAN bus to enable the start of the
engine. Without valid handshake between engine control unit and Immobilizer engine start is
not possible.
3
Nominal voltage
12 V
Operating voltage
8 to 16 V DC
Operating temperature
-20 °C to +70 °C
Storage temperature
-30 °C to +80 °C
Operating current consumption
<= 150 mA at 12 V
Operating frequency
125 kHz
Inductance
500 ±10 µH @ 125 kHz (mounted on the lockset)
Resistance
7.5 Ω ±5% @ 26 °C
Number of turns
107
Q Factor
Not specified
Gain
Not applicable
Type
Air Core
Dimensions (with rubber mount)
53.5 x 46.0 x 25.5
Weight
80 g
Housing
PA–6+30%GF
Minda Immo641
Manual
4. Technical Specification
Manufacturer
Minda Corporation Limited
D6-11, Sector-59,
Noida – 201301
Distt. G.B. Nagar U.P.
INDIA
Electrical features
Antenna:
Mechanical featues
4
Minda Immo641
Manual
5. Certifications
USA
5.1.1. FCC grantee code
Product name: Immo641
FCC ID: 2AKP9IMMO641
5.1.2. FCC Warnings
a) User Information according to FCC 15.21:
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
b) Part 15 Statement according to FCC 15.19/RSS Gen Issue 4 Sect. 8.4
This device complies with Part 15 of the FCC Rules and with Industry Canada licenseexempt RSS standard(s). Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Canada
IC: 22273-IMMO641
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil
ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
Warning / Avertissement:
To satisfy the ISED Canada exposure requirements a separation distance of 1 cm or more
should be maintained between the antenna of this device and persons during operation. To
ensure compliance, operations at closer distances than this are not recommended.
Pour satisfaire aux ISED Canada exigences RF exposition une distance de séparation de 1 cm
ou plus doit être maintenue entre l’antenne de cet appareil et les personnes pendant le
fonctionnement.
5
Minda Immo641
Manual
Taiwan
6
Loading...