KTI Networks KS-801 User Manual

Installation Guide

10/100 Fast Ethernet Managed

Switch with Fiber Connectivity

KS-801

-1-

DOC.001002-KS801-K

Ó 2000 KTI Networks Inc. All rights reserved. No part of this documen­tation may be reproduced in any form or by any means or used to make
any directive work (such as translation or transformation) without per­mission from KTI Networks Inc.

KTI Networks Inc. reserves the right to revise this documentation and to
make changes in content from time to time without obligation on the part
of KTI Networks Inc. to provide notification of such revision or change.

For more information, contact:

United States KTI Networks Inc.

P.O. BOX 631008
Houston, Texas 77263-1008

Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
URL: http ://www.ktinet.com/

International Fax: [phone]

E-mail: [e-mail]
URL: http://www.ktinet.com.tw/

-2-

9-Port Fast Ethernet Managed

Switch with Fiber Connectivity

INSTALLA TION GUIDE

-3-

DOC.001002-KS801-NK

P/N: 750-0150-002

The information contained in this document is subject to change without prior notice.

TRADEMARKS

Ethernet is a registered trademark of Xerox Corp.

This device complies with Class A Part 15 the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received including the interference that may cause.

CISPR A COMPLIANCE:

This device complies with EMC directive of the European Community and meets or exceeds the follow­ing technical standard.
EN 55022 - Limits and Methods of Measurement of Radio Interference Characteristics of Information
Technology Equipment. This device complies with CISPR Class A.
WARNING: This is a Class A product. In a domestic environment this product may cause radio inter­ference in which case the user may be required to take adequate measures.

CE NOTICE

Marking by the symbol indicates compliance of this equipment to the EMC directive of the
European Community. Such marking is indicative that this equipment meets or exceeds the following

technical standards:
EN 55022: Limits and Methods of Measurement of Radio Interference characteristics of Information
Technology Equipment.
EN 50082/1:Generic Immunity Standard -Part 1: Domestic Commercial and Light Industry.
EN 60555-2: Disturbances in supply systems caused by household appliances and similar electrical equip­ment - Part 2: Harmonics.

-4-

Table of Contents

1. Introduction......................................................... 6

1.1 Features...............................................................................7

1.2 Specifications.......................................................................9

2. Installing the Switch .........................................10

2.1 Packing List .......................................................................10

2.2 Panels................................................................................ 1 1

2.3 Mounting the Switches .......................................................1 2

3. Making Network Connections .........................13

3.1 Network Switched Ports .....................................................1 3

3.2 10/100BASE-TX Fast Ethernet Ports..................................15

3.3 Fast Ethernet Fiber Slot .....................................................1 7

3.4 Making Trunk Connections .................................................20

3.5 Making Sniffer ....................................................................22

4. LED Indicators ..................................................23

4.1 LED Panels........................................................................23

4.2 Interpretation ......................................................................23

5. Performing Network Management .................. 24

5.1 Management Support .........................................................24

5.2 Management objects..........................................................2 5

5.3 Setting IP Address .............................................................26

5.4 Console Management ........................................................26

5.5 Web Management..............................................................2 7

5.6 T elnet Management ............................................................27

5.7 SNMP Management ...........................................................2 8

5.8 U pgrad e Firm ware ..............................................................2 8

5.9 Support ..............................................................................29

-5-

1. Introduction

Driven by recent advances in desktop computing technology, todays
network applications have increased in speed, power and the ability to
process information. To meet the demands of these more bandwidth­intensive applications, this switch device provides significant increase
in performance for your Ethernet and Fast Ethernet network. The switch
comes with high number of 10/100 Fast Ethernet switched ports, each
capable of transferring information simultaneously at full wire speed to
control and allocate the network bandwidth. It also provides one Fast
Ethernet Fiber slot for uplink to fiber backbone.

The key features of the switch units are:
 Easy Migration : With 10BASE-T, 100BASE-T support, the switch

provides a non-disruptive and smooth migration path from Ethernet
to Fast Ethernet network.

 Easy Installation : With the functions of auto-speed-sensing and

auto-negotiation on each port, the switches support plug-and-play
installation by default which eliminates configuration problems.

 Fiber Connectivity : With 100BASE-FX slot support, the switch pro-

vides an optional solution for fiber uplink when it is needed.

 Network Management : With the built-in SNMP and web manage-

ment software agent, the switch provides network management func­tion for advanced applications remotely.

-6-

1.1 Features

Designed for resolving congestion problems caused by bandwidth-hun­gry devices and bandwidth-intensive applications as well as a high num­ber of users, the switches not only adhere to the IEEE 802.3 10BASE-T,
IEEE 802.3u 100BASE-TX, and 100BASE-FX standards, but also feature:

 Nine of 10/100BASE-TX auto-negotiation switched ports for

flexible connections to desktop PCs, servers and hubs.

 The 10/100BASE-TX switched ports support:

- auto speed sensing for 100Mbps or 10Mbps connection

- auto configuration with auto-negotiation devices

 One 100Mbps Fast Ethernet fiber slot supports:

- 100BASE-FX ST fiber module for MM fiber

- 100BASE-FX SC fiber module for MM and SM fiber

- 100BASE-FX MT-RJ fiber module for MM and SM fiber

- 100BASE-FX VF-45 fiber module for MM fiber
 Self learning for network configuration
 Store and forward switching to ensure only good packets are forwarded
 Full-duplex or half-duplex operation support for all switched ports
 Forwarding and filtering at full wire speed
 Supports IEEE 802.3x flow control for full-duplex operation
 Supports back-pressure flow control for half-duplex operation
 Supports IEEE 802.1d spanning tree protocol
 Supports port trunking function
 Supports port sniffer function
 Supports Web-based and SNMP management
 Full diagnostic LED indicators to indicate the power and port

status

 19-inch rack mountable

-7-

Management Features:
 Telnet for remote control
 Provides one RS232 local console port
 IEEE 802.1d Spanning Tree protocol
 TFTP - software upgrade capability
 Web-based management
 SNMP management

- SNMP agent RFC 1155-1157

- MIB-II, private MIB

-8-

1.2 Specifications

Standard IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX FX

IEEE 802.3x Full duplex flow control
IEEE 802.1D Spanning tree

Network ports 9 10/100BASE-TX switched ports

1 Fast Ethernet fiber slot for 100BASE-FX fiber modules

Console port 1 DB9 Male connector
Cables 10BASE-T Cat. 3, 4, 5 UTP cable (100 meters max.)

100BASE-TX Cat. 5 UTP cable (100 meters max.)
100BASE-FX Multimode and Single Mode fiber

Unit LED Power status
TP Port LED Link/Activity, Speed, Duplex/Collision status per port
Filtering rate 14,880 pps for Ethernet (10BASE-T)

148.8 Kpps for Fast Ethernet (100BASE-TX and -FX)

Forwarding rate 14,880 pps for Ethernet (10BASE-T)

148.8 Kpps for Fast Ethernet (100BASE-TX and -FX)

Filtering address Multicast/Broadcast/Unicast address
MAC addresses 4K entries
Trunking 2 trunks max., 4 trunking ports per trunk max.
RAM buffer 512K bytes
Environment Temperature 0oC to 40oC

Relative humidity 10% to 90% non-condensing

Power Universal power supply 100-240VAC, 47-63Hz, 25W
Dimension 260x150x44.4mm (10.24x5.9x1.75inch)

-9-