KTI Networks KS-124, KS-116 User Manual

KS-116, KS-124

16/24-Port 10/100 Workgroup
Fast Ethernet Switches

Key Features :



Provide 16/24 10/100Mbps Fast Ethernet ports



All ports support auto-negotiation and auto-MDI/MDI-X detection



Support full/half-duplex transfer mode for 10/100Mbps



Wire speed reception and transmission



Store-and-Forward switching method



Self learning for active MAC addresses up to 8K entries



Supports IEEE 802.3x flow control for full-duplex mode and backpressure flow control for half-

duplex mode

FCC Part 15

CISPR 22 Class B

Class B

'

Katron Technologies Inc.

15F-7, No. 79, Sec. 1, Hsin Tai Wu Rd.,Hsi-

Taipei Hsien, Taiwan.

chih,
Te l:886-2-2698-3878
Fax:[phone]
E-mail:[e-mail]
URL:http://www.ktinet.com.tw

KTI Networks Inc.

7400 Harwin Dr., Suite 120 Houston, Texas
77036 U.S.A.
Te l:713-266-3891
Fax:[phone]
E-mail:[e-mail]
URL:http://ww

Trademarks: All brand names are trademarks or registered
trademarks of their respective holders.
This information is subject to change without prior notice.

w.ktinet.com

Specifications:

Standards IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX

Number of Ports 16/24 x 10/100Mbps auto-negotiation & auto-MDI/MDI-X ports

Network Ports 10Base-T : Cat.3, 4, 5 or higher ( 100 meters max. )
100Base-TX : Cat.5, 5e or higher ( 100 meters max. )

Network Data Ethernet : 10Mbps (Half-duplex) 20Mbps (Full-duplex)

Transfer Rate Fast Ethernet : 100Mbps (Half-duplex) 200Mbps (Full-duplex)

MAC Address Table 8K entries

LEDs Per Unit : Power
Per Port : Link/ACT, and speed

Environment Operating temperature : 0OC ~ 40OC
Storage temperature : -20OC ~ 70OC
Humidity : 10% ~ 90%RH non-condensing

Dimension 283 x 178 x 45 mm (WxDxH)

Power 100-240VAC, 50-60Hz

Power KS-116: 6 watts. (max.)
Consumption KS-124: 6.4 watts. (max.)

Approval FCC Class B, CE mark Class B

Ordering Informaton:

KS-116 Ver.D 16-Port 10/100 Workgroup Fast Ethernet Switches

KS-124 Ver.E 24-Port 10/100 Workgroup Fast Ethernet Switches

080110