KTI Networks KS-1080 User Manual

KS-1080

Managed 8-Port 10/100 Fast Ethernet Switch
with PoE Function and Fiber Connectivity

Product Highlights :



4 PoE PSE 10/100M ports



2 typical 10/100M ports



2 100FX port slots



SNMP/Web/Telnet management



Port-based, 802.1Q VLAN



Port, 802.1p, DSCP, IP

network based QoS

Ordering Information :

Model

KS-1080-xxx

KS-1080-FMT

KS-1080-FMC

KS-1080-FJM

KS-1080-FSA2

KS-1080-FSL2 SC SMF

FCC Part 15

Fiber Mode

ST MMF

SC MMF

MT-RJ MMF

SC SMF

Class A

CISPR 22 Class A

'

Katron Technologies Inc.

15F-7, No. 79, Sec. 1, Hsin Tai Wu Rd.,

Taipei Hsien, Taiwan.

Hsi-chih,
Te l : 886-2-2698-3878
Fax : [phone]
E-mail : [e-mail]
URL : http : //www.ktinet.com.tw

KTI Networks Inc.

7400 Harwin Dr., Suite 120 Houston,
Texas 77036 U.S.A.
Te l : 713-266-3891
Fax : [phone]
E-mail : [e-mail]
URL : http : //ww

Trademarks : All brand names are trademarks or registered
trademarks of their respective holders.
This info

w.ktinet.com

rmation is subject to change without prior notice.

Max.

Distance

2km

2km

2km

20km

20km

Key Features :



6 10/100M ports support auto-negotiation and auto-MDI/MDI-X configuration



4 10/100M ports provide PoE PSE functions



2 100FX fiber port slots support optional fiber modules



Fiber modules support single mode fiber and multimode fiber connections



Provides wire speed store-and-forward switching



Supports IEEE 802.3x flow control for full-duplex operation and back-pressure for half-duplex



Provides port-based, 802.1Q tag-based VLAN function



Provides port-based, 802.1p, DSCP-based, and IP address QoS function



Provides port configuration and PoE control



SNMP, telnet, Web management support

Specifications :

Standard IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, 100Base-FX, IEEE 802.3af

Network Ports 6 10/100Mbps auto-negotiation, auto-MDI/MDI-X ports
2 100Mbps 100Base-FX port slots

Network Cables 10Base-T : Cat. 3, 4, 5 or higher up to 100m
100Base-TX : Cat. 5 or higher up to 100m
100Base-FX : MMF 50/125µm 60/125µm, SMF 9/125µm

PoE Function IEEE 802.3af compliance
PSE (power source) on Port 1 - Port 4
48VDC, 15.4W max. per port

VLAN function Port-based, IEEE 802.1Q Tag-based

QoS function Port-based, 802.1p-based, DSCP-based, network address-based

Management SNMP MIB-II and private MIB, telnet, web, event traps

MAC Addresses Table with 1K entries

LEDs Per unit : Power
Per 10/100M port : Link/Activity, 100M, Duplex/Collision status
Per fiber port slot : Link/Activity status

Environment Operating Temperature : 0OC ~ 40OC, Storage temperature: -20OC ~ 85OC
Relative Humidity : 5% ~ 95% non-condensing

Dimension 295 x 160 x 43 mm (19” Rack mountable)

Power 100-240VAC, 50-60Hz, 87 watts max.(includes PoE full power supply)

Fiber Optical Specification of Fiber Modules :

Model FX & Cable Wavelength Tx Power Rx Sensitivity Max. Rx Power

KS-1080-FMT ST MMF 1310nm -19 ~ -14dBm -31dBm -14dBm
KS-1080-FMC SC MMF 1310nm -19 ~ -14dBm -31dBm -14dBm
KS-1080-FJM MT-RJ MMF 1310nm -19 ~ -14dBm -31dBm -14dBm
KS-1080-FSA2 SC SMF 1310nm -15 ~ -8dBm -31dBm -7dBm
KS-1080-FSL2 SC SMF 1310nm -15~-7dBm -32dBm -3dBm

080110