KTI Networks KS-105F User Manual

KS-105F, KS-108F
5/8-Port Fast Ethernet Switches with 1 Fiber Connection
Key Features :
Provide 4/7 10/100Mbps Fast Ethernet Switch ports and 1 100Base-FX port
Each TP port supports auto-negotiation and auto-MDI/MDI-X detection
Support duplex mode selector for the 100BASE-FX fiber port
Self learning for active MAC addresses and address aging
Store-and-forward switching to ensure only good packets are forwarded
Forwarding and filtering at full wire speed
Support IEEE 802.3x flow control for full-duplex mode and backpressure flow control for half­ duplex mode
Comprehensive LED indicators provide quick, easy to read port and switch information
Specifications :
10/100 Ports IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX std. Shielded RJ-45 jacks with Auto MDI-X detection Auto-negotiation capable Speed for 10Mbps or 100Mbps Full-duplex or half-duplex mode support
100FX Port IEEE 802.3u 100BASE-FX compliant Fixed 100Mbps operation Duplex mode selector - full-duplex or half-duplex
Flow control IEEE 802.3x pause packet for full-duplex operation Back-pressure for half-duplex operation
Cables 10Base-T : Cat. 3, 4, 5 or higher (100 meters max.) 100Base-TX : Cat. 5, 5e or higher (100 meters max.) 100Base-FX : multimode or single mode fiber cable
LEDs Power status Per port : Speed, Link, Activity, Duplex, Collision status
Forwarding rate 14,880 pps for Ethernet (10M) 148,800 pps for Fast Ethernet (100M)
Filtering address Multicast/Broadcast/Unicast address
MAC Address Table 1K entries
Aging time KS-105F : 300 seconds KS-108F : 240 seconds
080110
Ordering Information :
KS-105F KS-108F
-W3515
-W5315
MM : Multimode Fiber SM : Single Mode Fiber Ref. Distance: Reference connection distance
Katron Technologies Inc.
15F-7, No. 79, Sec. 1, Hsin Tai Wu Rd., Hsi-chih, Te l : 886-2-2698-3878 Fax : 886-2-2698-3873 E-mail : kti@ktinet.com.tw URL : http : //www.ktinet.com.tw
KTI Networks Inc.
7400 Harwin Dr., Suite 120 Houston, Texas 77036 U.S.A. Te l : 713-266-3891 Fax : 713-914-0555 E-mail : kti@ktinet.com URL : http : //ww
Trademarks : All brand names are trademarks or registered trademarks of their respective holders. This info
Fiber
Connector
Mode
-T
-C
-JM
-VM
-SA2
-SL2
-SL3
-SL4
FCC Part 15
CISPR 22 Class A
Taipei Hsien, Taiwan.
rmation is subject to change without prior notice.
Dual ST
MM
Dual SC
MM
MM
MT-RJ
MM
SM
Dual SC
SM
Dual SC
SM
Dual SC
SM
Dual SC
SM
Bi-Di SC
SM
Bi-Di SC
'
w.ktinet.com
Distance
VF-45
15~20km
15~20km
Class A
Ref.
2km
2km
2km
2km
20km
20km
30km
40km
Environment Operating Temperature : 0OC ~ 40OC Relative Humidity : 10% ~ 90% non-condensing
Dimensions KS-105F : 144 x 104.5 x 26 mm (WxDxH) KS-108F : 180 x 114.5 x 26 mm (WxDxH)
DC IN Jack Rating +7.5V/1A, D6.3mm D2.0mm
DC IN voltage Operating +6.0V ~ +12.6VDC (Device DC Input)
Power Consumption KS-105F : 3.9 watts. (max.) KS-108F : 6.3 watts. (max.)
Fiber Optical Specification :
Model Connector FiberCable Wavelength Tx Power Sensitivity Rx Max.
-T ST Duplex MMF 1310nm -19~ -14dBm -31dBm -14dBm
-C SC Duplex MMF 1310nm -19~ -14dBm -31dBm -14dBm
-JM MT-RJ MMF 1310nm -19~ -14dBm -31dBm -14dBm
-VM VF-45 MMF 1310nm -20~ -14dBm -31dBm -14dBm
-SA2 SC Duplex SMF 1310nm -15~ -8dBm -31dBm -7dBm
-SL2 SC Duplex SMF 1310nm -15~ -7dBm -32dBm -3dBm
-SL3 SC Duplex SMF 1310nm -15~ -8dBm -34dBm 0dBm
-SL4 SC Duplex SMF 1310nm -5~ 0dBm -34dBm -3dBm
-W3515 Bi-Di SC SMF TX 1310nm -14~ -8dBm -31dBm 0dBm RX 1550nm
-W5315 Bi-Di SC SMF TX 1550nm -14~ -8dBm -31dBm 0dBm RX 1310nm
MMF : Multimode fiber -62.5/125 µm, 50/125 µm SMF : Single Mode fiber - 9 /125 µm
080110
Loading...