KTI Networks KCD-300 User Manual

Page 1

KCD-300

DIN Rail Mounting Bracket

Panel Mounting Bracket

Industrial 10/100Base-TX to 100Base-FX Media Converters

The industrial KCD-300 media converter series provides industrial strength Ethernet copper-to-fiber media conversion, allowing for 10Base-T-100Base-FX or 100Base-TX-100Base-FX over multi-mode or optional single-mode fiber optical media.

Benefits :



Comprehensive configuration settings to increase flexibility for application needs



Wide operating temperature range for temperature critical environment



Support DIN rail mounting and panel mounting



Provide two power input types to meet more application needs



Accept wide power input voltage range for application flexibility



Industrial-rated Emission and Immunity performance

Key Features :



Support full wire speed conversion for 10/100 speed and media types



Support auto-negotiation 10/100Mbps or forced mode on TP copper port



Auto MDI/MDI-X crossover function on the TP copper port



Provide Link Fault Pass Through function



Provide comprehensive manual configuration settings



Transparent conversion to 802.1Q VLAN tagged packets



Provides Far End Fault function on FX (fiber) port



Low power consumption



Two power interface types: screw terminal block and DC Jack



Supports wide power input voltage range



Supports DIN rail mounting and optional screwed plane mounting



Supports wide operating temperature range



Industrial-rated Emission and Immunity performance

Specifications :

Conversion 10BASE-T to 100BASE-FX 100BASE-TX to 100BASE-FX

Conversion Methods Smart-forward mode :

- Store-and-forward for 10M to 100M

- Direct conversion for 100M to 100M Store-and-forward always mode

Packet Types Transparent conversion with no modification to :

- Standard IEEE 802.3 Ethernet packet frames

- IEEE 802.1Q tagged packet frames

TP Port Shielded RJ-45 jack Auto MDI/MDI-X crossover function Auto-negotiation function for speed and duplex mode Full-duplex and half-duplex support 10Mbps - supports Cat. 3,4,5 UTP cable up to 100m 100Mbps - supports Cat. 5 UTP cable up to 100m

080110

Page 2

EMI EMS Safety Environmental Tests :

Test

FCC/EMI

CE/EMC/EMI

CE/EMC/Harmonic

CE/EMC/VFF

CE/EMC/EMS

ESD Test

RS Test

EFT/BURST

Surge Immunity

CS Test

Magnetic Field Imm.

Voltage Dips Imm.

Safety

Dielectric Voltage

Insulation Resistance

Cold Test

Dry Heat Test

Damp Heat Test

Storage Test

Vibration Test

Standard

FCC Rule Part 15

EN55022, CISPR 22

EN 61000-3-2

EN 61000-3-3

EN 55024

IEC 61000-4-2

IEC 61000-4-3

IEC 61000-4-4

IEC 61000-4-5

IEC 61000-4-6

IEC 61000-4-8

IEC 61000-4-11

EN 60950, IEC 60950

IEEE 802.3

IEC 68-2-1 Test Ad

IEC 68-2-2 Test Bd

IEC 68-2-3

IEC 68-2-48

IEC 68-2-34

Specifications

Class B

< 75 W

Clause 5

+/-8KV

Strength:10V/m

Power:+/-4KV

Data:+/-2KV

Level 3

50Hz 40A/m

Interruption : C

Dips : A

TP, 1500VAC/60sec.

TP, 500VDC/10Mohm

-20

C, 96hrs

+70

C 40%RH 96hrs

C 90%RH 96hrs

+60

C 96hrs

-20

C 40%RH 96hrs

+85

Ordering Information :

Operating

Model

KCD-300-xxx

-T

-C

KCD-3PB

FX Port

Fiber

ST MMF

SC MMF

SC MMF-C1

SC SMF-SA2

SC SMF-SL2 20km

SC SMF-SL3

SC SMF-SL4

SC SMF-SL10 100km

Bi-Di SC SMF-W3515 15~20km

Bi-Di SC SMF-W5315 15~20km

Ref.

Temperature

Distance

2km

-10 ~ 70OC

2km

-20 ~ 70OC

2km

-20 ~ 70OC

20km

-20 ~ 70OC

30km

-20 ~ 70OC

40~50km

-20 ~ 70OC

Panel mounting

bracket for KCD-300

Fiber (FX) Port Multimode ST, SC, Single mode SC 100Mbps Full-duplex and half-duplex support MMF 50/125µm, 62.5/125µm fiber cable SMF 9/125µm cable Far End Fault Indication support

Flow Control IEEE 802.3x for full-duplex, Back pressure for half-duplex

LEDs - Power status

- TP port link, activity, speed, duplex status

- Per FX port link, activity, optical link status

Configuration Setting Switches Auto/forced mode, TP speed, TP duplex FXduplex

DC Power Input Screwed terminator block : 2 pairs of +/- contacts DC jack : -D 6.3mm / + D 2.0mm Operating voltage range : +7 - +30VDC

Power Consumption 3W max. @30VDC power input

Dimension 28 x 82 x 95 mm, Weight : 250g

Housing Enclosed metal with no fan

Mounting Support DIN Rail mounting, Panel mounting

Environment Operating Temperature: See ordering information Storage Temperature: -20

C ~ 85OC

Relative Humidity: 5% ~ 95% non-condensing

Approval FCC Class B, CE/EMC Class B, EN60950 safety

Fiber Optical Specification :

Model FX &Cable Wavelength Tx Power Rx Sensitivity Rx Max.Power

-T ST MMF 1310nm -19 ~-14 dBm -31 dBm -14 dBm

-C SC MMF 1310nm -19 ~-14 dBm -31 dBm -14 dBm

-C1 SC MMF 1310nm -20 ~-14 dBm -31 dBm 0 dBm

-SA2 SC SMF 1310nm -15 ~-8 dBm -31 dBm -7 dBm

-SL2 SC SMF 1310nm -15 ~-8 dBm -30 dBm -7 dBm

-SL3 SC SMF 1310nm -15 ~-8 dBm -34 dBm 0 dBm

-SL4 SC SMF 1310nm -5 ~0 dBm -35 dBm -3 dBm

-SL10 SC SMF 1550nm -5 ~0 dBm -35 dBm -3 dBm

-W3515 Bi-Di SC SMF Tx 1310nm -14 ~-8 dBm -31 dBm 0 dBm Rx 1550nm

-W5315 Bi-Di SC SMF Tx 1550nm -14 ~-8 dBm -31 dBm 0 dBm Rx 1310nm

FCC Part 15

CISPR 22 Class B

Class B

Katron Technologies Inc.

15F-7, No. 79, Sec. 1, Hsin Tai Wu Rd.,

Taipei Hsien, Taiwan.

Hsi-chih, Te l:886-2-2698-3878 Fax:886-2-2698-3873 E-mail:kti@ktinet.com.tw URL:http://www.ktinet.com.tw

KTI Networks Inc.

7400 Harwin Dr., Suite 120 Houston, Texas 77036 U.S.A. Te l:713-266-3891 Fax:713-914-0555 E-mail:kti@ktinet.com URL:http://ww

Trademarks: All brand names are trademarks or registered trademarks of their respective holders. This information is subject to change without prior notice.

w.ktinet.com

080110