KTI Networks KC-300DM User Manual

KC-300D, KC-300DM

10/100Base-TX to 100Base-FX
Media Converters

Product Highlights :



Full wire speed performance



Comprehensive configuration

options



Loop back test support



Remote TP link monitoring



Low power consumption



Loop back test support



Optional Din-Rail mounting



Center Chassis installation

support



Options for Bi-Di

communication



Options for CWDM

KC-3DR :
Din-Rail mounting bracket

KC-1300 :
Managed center chassis

The media converters are designed to convert 10Base-T or 100Base-T signals to/from 100Base-FX
fiber signals. It is used to extend the connection distance between two Ethernet devices via fiber
cable transparently with no performance degradation. The media converters not only support
existing variety of multimode and single mode fibers but also support Bi-Di WDM and CWDM fiber
network applications. It is also featured with design to support center chassis installation with
optional power redundancy and management features when a larger fiber network is required.

Key Features :



Convert speed and media type in full wire speed



Support 10/100M dual speed on TP connections, auto-negotiation, and auto-MDI/MDI-X

detection



Link fault pass through function



Transparent to 802.1Q VLAN tagged packets



Far End Fault function on FX port



Support desktop,wall, and DIN-rail mounting



Support center chassis installation



Low power consumption



Support wide range of fiber options



Provide user accessible settings for TP port configuration,disabling link fault pass through

function

KC-300DM Specific



Provides indications of remote media converter's TP port status



Provides Loop Back Test function with connected remote media converter

Specifications :

TP Port IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX
Shielded RJ-45 jacks with Auto MDI/MDI-X detection
Auto-negotiation for speed and duplex auto detection
Forced mode with speed and duplex settings
Speed for 10Mbps or 100Mbps, Full-duplex or half-duplex support

FX Port IEEE 802.3u 100Base-FX compliant
Forced 100Mbps, Full duplex (factory default)
Far end fault Function

Cable Cat. 5 UTP cable, MMF - 62.5/125µm, 50/125µm, SMF - 9 /125µm

LEDs KC-300D : Power status
TP Ports : Link/Act, Speed, Duplex status
FX Ports : Link/Act status, Fiber signal detected
KC-300DM: Power status
TP Ports : Link/Act, Speed, Duplex status
FX Ports : Link/Act status, Fiber signal detected
Remote TP Ports : Link, Speed, Duplex status

080110

Ordering Information :

KC-300D-X

KC-300DM-X

-SA2

-SL2

-SL3

-SL4

-SL6

-SL7

-SL9

-SL10

-SL12

-W3515

-W5315

-W3540

-W5340

-CxxW40

-CxxW80

MM : Multimode Fiber
SM : Single Mode Fiber
Ref. Distance: Reference connection distance

Fiber

Mode

MM

-T

MM

-C

MM 2km-EC Dual SC

-JM

-VM

MM

MM

SM

SM

SM

SM

SM

SM

SM

SM

SM

SM

SM

SM

SM

SM

SM

FCC Part 15

CISPR 22 Class B

Connector

Dual ST

Dual SC

MT-RJ

VF-45

Dual SC

Dual SC

Dual SC

Dual SC

Dual SC

Dual SC

Dual SC

Dual SC

Dual SC

Bi-Di SC

Bi-Di SC

Bi-Di SC

Bi-Di SC

CWDM SC

CWDM SC

Class B

'

Katron Technologies Inc.

15F-7, No. 79, Sec. 1, Hsin Tai Wu Rd.,

Taipei Hsien, Taiwan.

Hsi-chih,
Te l:886-2-2698-3878
Fax:[phone]
E-mail:[e-mail]
URL:http://www.ktinet.com.tw

KTI Networks Inc.

7400 Harwin Dr., Suite 120 Houston,
Texas 77036 U.S.A.
Te l:713-266-3891
Fax:[phone]
E-mail:[e-mail]
URL:http://ww

Trademarks: All brand names are trademarks or registered
trademarks of their respective holders.
This info

w.ktinet.com

rmation is subject to change without prior notice.

Ref.

Distance

2km

2km

2km

2km

20km

20km

30km

40km

60km

70km

90km

100km

120km

15~20km

15~20km

40km

40km

40km

80km

Configuration Switches Accessible settings :
KC-300D - TP mode, TP duplex, TP speed, Link fault pass through
KC-300DM - TP mode, TP duplex, TP speed, Link fault pass through,
Auto status report

Packet Size Up to 1522 bytes for store-and-forward mode
No packet size limit for smart-forward mode (100-to-100)

Environment Operating Temperature: -5OC to 50OC

-20OC to 60OC (KC-300D-EC, KC-300DM-EC)
Storage Temperature: -20OC to 80OC
Relative Humidity: 5% to 95% non-condensing

Weight KC-300D : 210g, KC-300DM : 213g

Dimension 108 x 72.5 x 23 mm (WxDxH)

Operating voltage +5V ~ +12VDC (+/-5%)(Device DC Input)

Power Consumption 2 watts. (max.)

Approval FCC class B, CE class B

Optical Specifications : KC-300D-X, KC-300DM-X

Model Connector Fiber Wavelength Tx Power Sensitivity Rx Max.

-T ST Duplex MMF 1310nm -19~ -14dBm -31dBm -14dBm

-C SC Duplex MMF 1310nm -19~ -14dBm -31dBm -14dBm

-EC SC Duplex MMF 1310nm -20~ -14dBm -31dBm 0dBm

-JM MT-RJ MMF 1310nm -19~ -14dBm -31dBm -14dBm

-VM VF-45 MMF 1310nm -20~ -14dBm -31dBm -14dBm

-SA2 SC Duplex SMF 1310nm -15~ -8dBm -31dBm -7dBm

-SL2 SC Duplex SMF 1310nm -15~ -7dBm -32dBm -3dBm

-SL3 SC Duplex SMF 1310nm -15~ -8dBm -34dBm 0dBm

-SL4 SC Duplex SMF 1310nm -5~ 0dBm -34dBm -3dBm

-SL6 SC Duplex SMF 1310nm -5~ 0dBm -35dBm 0dBm

-SL7 SC Duplex SMF 1310nm -3~ +3dBm -37dBm 0dBm

-SL9 SC Duplex SMF 1310nm 0~ +5dBm -37dBm 0dBm

-SL10 SC Duplex SMF 1550nm -3~ +3dBm -37dBm 0dBm

-SL12 SC Duplex SMF 1550nm 0~ +5dBm -37dBm 0dBm

-W3515 Bi-Di SC SMF TX 1310nm -14~ -8dBm -31dBm 0dBm
RX 1550nm

-W5315 Bi-Di SC SMF TX 1550nm -14~ -8dBm -31dBm 0dBm
RX 1310nm

-W3540 Bi-Di SC SMF TX 1310nm -8~ 0dBm -34dBm 0dBm
RX 1550nm

-W5340 Bi-Di SC SMF TX 1550nm -8~ 0dBm -34dBm 0dBm
RX 1310nm
RX 1310nm

-CxxW40 CWDM SC SMF Tx 1xx0nm -5~ 0dBm -35dBm 0dBm
RX 1100-1650nm

-CxxW80 CWDM SC SMF Tx 1xx0nm 0~ +5dBm -37dBm 0dBm
RX 1100-1650nm

MMF : Multimode fiber 62.5/125 µm,50/125 µm
SMF : Single Mode fiber 9 /125 µm

080110