KTI Networks KC-300D User Manual
KFC-241 Series
Industrial Compact 10/100BASE-TX
to 100BASE-FX Media Converters
Product Highlights:
Compact and robust
Auto-crossover
Auto-negotiation
Smallest latency
Far End Fault support
Link Fault Pass Through
Wide range of DC IN voltage
DC 110V support
Industrial rated
Key Features:
Support full wire speed conversion for 10/100Mbps speed and media types
Support auto-negotiation 10/100Mbps or forced mode on the copper port
Auto MDI/MDI-X crossover function on the copper port
Provide Link Fault Pass Through function
Transparent conversion to 802.1Q VLAN tagged packets
Provides Far End Fault function on FX (fiber) port
The optimal latency for 100M to 100M conversion
Two power interface types: screw terminal block and DC Jack
Low power consumption
DC power input options: +4.5 ~ +50VDC, 110VDC
Supports DIN rail mounting and optional screwed plane mounting
Compact design for easy installation in enclosure and chassis
Supports wide operating temperature range
Industrial-rated Emission and Immunity performance
Specifications:
Conversion 10BASE-T to 100BASE-FX, 100BASE-TX to 100BASE-FX
10/100BASE-T Auto to 100BASE-FX
Conversion Methods Cut-through for 100M to 100M with the smallest latency
Store-and-forward for 10M to 100M conversion
Auto mode-switching
Copper Port IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX
Shielded RJ-45 jacks with Auto MDI/MDI-X detection
Auto-negotiation for speed and duplex
Fiber Port (FX) IEEE 802.3u 100Base-FX compliant
Forced 100Mbps, Full duplex
Far end fault Function
Network Cables 10/100Mbps copper: Cat.5 up to 100m,
100BASE-FX: 62.5/125
Packet Size Up to 1536 bytes for 10M-to-100M conversion
No packet size limit for 100M-to-100M conversion
DC IN Voltage KFC-241-L: +4.5 ~ +50VDC
KFC-241-H: +110VDC with polarity protection
DC IN Connectors Industrial Terminal Block 3P: DC+, DC-, PE
DC Jack ( KFC-241-L)
Power Consumption KFC-241-L: 1.6W@+7.5V, 1.6W@+12V, 2W@+48V
KFC-241-H: 2.9W@110VDC
Housing Enclosed metal with no fan
µm
, 50/125µm MM fiber, 9/125µm SM fiber
120525
Ordering Informations:
Model DC IN
-T
-C
-SL2
-SL3
-SL6
TB-3P, DC Jack
TB-3P
Fiber
Mode
MM
MM
SM
SM
SM
SM
SM
KFC-241-L-x
KFC-241-H-x
KFC-241-L-x
KFC-241-H-x
-W3520
-W5320
MM: Multimode Fiber
SM: Single Mode Fiber
Ref. Distance: Reference connection distance
EMI EMS Safety Environmental Tests:
Test
FCC/EMI
CE/EMC/EMI
CE/EMC/Harmonic
CE/EMC/VFF
CE/EMC/EMS
ESD Test
RS Test
EFT/BURST
Surge Immunity
CS Test
Magnetic Field Imm.
Voltage Dips Imm.
Safety
Dielectric Voltage
Insulation Resistance
Cold Test
Dry Heat Test
Damp Heat Test
Storage Test
Vibration Test
Standard
FCC Rule Part 15
EN55022, CISPR 22
EN 61000-3-2
EN 61000-3-3
EN 55024
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11
EN 60950, IEC 60950
IEEE 802.3
IEEE 802.3
IEC 68-2-1 Test Ad
IEC 68-2-2 Test Bd
IEC 68-2-3
IEC 68-2-48
IEC 68-2-34
DC IN Voltage
Connector
Duplex ST
Duplex SC
Duplex SC
Duplex SC
Duplex SC
BiDi SC
BiDi SC
TP, 1500VAC/60sec.
TP, 500VDC/10Mohm
+70
+60
+85
+4.5 ~ 50VDC
+110VDC
Ref.
Distance
2km
2km
20km
30km
60km
20km
20km
Specifications
Class A
Class A
< 75 W
Clause 5
Contact: +/-6KV
Air: +/-8KV
Strength: 10V/m
DC IN: +/-1KV
RJ-45: +/-0.5KV
DC IN: +/-0.5KV
RJ-45: +/-1KV
Level 3
50Hz 100A/m
Interruption: C
Dips: B
O
C, 96hrs
-30
O
C 40%RH 72hrs
O
C 90%RH 72hrs
O
-40
C 96hrs
O
C 40%RH 96hrs
Dimension KFC-241-L: 34 x 49 x 56mm (WxDxH)
KFC-241-H: 45.5 x 49 x 56mm (WxDxH)
Mounting Support DIN-Rail, Panel
Environment Operating temperature: -30OC ~ 70OC (Main device)
Storage temperature: -40OC ~ +85OC
Relative Humidity: 10%~90% non-condensing
Certification FCC Class A, CE mark Class A, LVD, TUV IEC 60950-1 safety, C-Tick
Fiber Optical Specifications:
Model Connector Fiber＊1 Wavelength Tx Power
-T Duplex ST MMF 1310nm -20 ~ -14dBm -32dBm -8dBm
-C Duplex SC MMF 1310nm -20 ~ -14dBm -31dBm 0dBm
-SL2 Duplex SC SMF 1310nm -15 ~ -8dBm -30dBm -7dBm
-SL3 Duplex SC SMF 1310nm -15 ~ -8dBm -34dBm 0dBm
-SL6 Duplex SC SMF 1310nm -5 ~ 0dBm -35dBm 0dBm
-W3520 BiDi SC SMF Tx 1310nm -14 ~ -8dBm -31dBm 0dBm
Rx 1550nm
-W5320 BiDi SC SMF Tx 1550nm -14 ~ -8dBm -31dBm 0dBm
Rx 1310nm
＊1 MMF: Multimode fiber - 62.5/125 µm, 50/125 µm
SMF: Single Mode fiber - 9 /125 µm
＊2 Data for 62.5/125µm MMF, 9 /125µm SMF
KFC-241-H with Panel mounting bracket KFC-241-L with Panel mounting bracket
＊2
Rx Sens. Rx Max.
FCC Part 15'Class A
CISPR 22 Class A
Katron Technologies Inc.
15F-7, No. 79, Sec. 1, Hsin Tai Wu Rd.,
Hsi-chih District, New Taipei City, Taiwan
Tel : 886-2-2698-3878
Fax : 886-2-2698-3873
E-mail : kti@ktinet.com.tw
URL : http : //www.ktinet.com.tw
KTI Networks Inc.
10415-A Westpark Drive, Houston,
TX 77042. U.S.A.
Tel : 1-713-266-3891
Fax : 1-713-914-0555
E-mail : contact@ktinet.com
URL : http : //www.ktinet.com
Trademarks : All brand names are trademarks or registered
trademarks of their respective holders.
This information is subject to change without prior notice.
KFC-241-H with DIN-Rail bracket KFC-241-L with DIN-Rail bracket
120525
Loading...