KT&C KPC-N551NU User Manual

M140-N551-001

HIGH PERFORMANCE

Super Night Vision Camera

OPERATION MANUAL

Thank you for choosing our high quality camera.
Before attempting to connect operate this unit, please read and follow these instructions.

CAUTION

These servicing instructions are for use by qualied service personnel only.

To reduce the risk of electric shock do not perform any servicing other than that

contained in the operating instructions unless you are qualied to do so.

Use Class 2 Power Supply Only

2

CONTENTS

1. CAUTIONS

2. IMPORTANT SAFETY INSTRUCTION

3. FEATURES

4. COMPONENTS

5. NAME AND FUNCTION

6. INSTALLATION

7. DIMENSIONS

8. SPECIFICATION

9. OSD MENU STRUCTURE

3

1. CAUTIONS

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions;

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference
that may cause undesired operation.

Note

This equipment has been tested and found to comply with limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio communications.
However, there is no guarantree that interference will not occur in a particular
installation. If this equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

• Reorient or relocate the receiving antena.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

whice the receiver is connected.

• Consult the dealer or an experienced radio / tv technician for helf.

Caution

Any changes or modications in construction of this devies which are not expressly

approved by the party responsible for compliance could void the user’s authority to
operate the equipment.

1. A regulated DC12V 1A power supply is recommended for use with this camera
for the best picture and the most stable operation.
An unregulated power supply can cause damage to the camera.

When unregulated power supply is applied, product warranty will be
out of subject.

2. It is recommended that the camera is used with a monitor that has a CCTV quality
75 video impedance level.
If your monitor is switched to high impedance then please adjust accordingly.

3. Do not attempt to disassemble the camera to gain access to the internal components.
Refer servicing to your dealer.

4. Never face the camera towards the sun or any bright or reective light, which may

cause smear on the picture and possible damage to the CCD.

5. Do not remove the serial sticker for the warranty service.

4

1. CAUTIONS

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with
separate collection systems)

This marking shown on the product or its literature, indicate that it should not
be disposed with other household wastes at the end of its working life. To
prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources.

This product should not be mixed with other commercial wastes purchased this
product, or their local government ofce, for details of where and how they can

take item for environmentally safe recycling.

Business users should contact their supplier and check the terms and
conditions of the purchase contract.
Household users should contact either the retailer where they for disposal.

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER(OR BACK). NO USER. SERVICING
TO QUALIFED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK DO NOT OPEN

This symbol is intended to alert the user to the presence of
uninsulated "dangerous voltage" within the product's enclosure that

may be of sufcient mangnitude to constitute a risk of electric shock

to persons.

This symbol is intended to alert the user to the presence of
important operating and maintenance(servicing) instruction in the
literature accompanying the appliance.

CAUTION

5

2. IMPORTANT SAFETY INSTRUCTION

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including ampliers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third

prong are provided for your safety. If the provided plug does not t into your outlet,

consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specied by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specied
by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the

cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long
periods of time.

14) Refer all servicing to qualied service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or plug

is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or

has been dropped.

6

3. FEATURES

• 1/3" 960H SONY EXview HAD CCD II

• Horizontal Resolution 700TV Lines

• OSD Function

• Multi Language

(ENGLISH / JAPANESE / GERMAN / FRENCH / RUSSIAN / PORTUGUESE / SPANISH / CHINESE)

• 2DNR

• Privacy Zone

• Motion Detect

• ATR(Adaptive Tone-curve Reproduction / Digital WDR)

The function provides gradation compensation to improve the contrast of subjects both
low-luminance areas and high luminance areas exist in the same picture

4. COMPONENTS

SUPER NIGHT
VISION CAMERA

SUNSHIELD

VIDEO OUTPUT
TEST CABLE

L-WRENCH /
SCREW - 3ea /

SUNSHIELD FIXING BOLT

OPERATION MANUAL

7

5. NAME AND FUNCTION

①

②

③

⑥

⑤ ⑦

①

Sunshield Fixing Bolt

②

Sunshield

③

Mounting Bracket

④

Body

⑤

External Zoom and

Focus adjustment

⑥

LED: 5ea(Hi-power)

⑦

Photo cell

⑧

Lens

Back

⑧

⑤

④

External Zoom and Focus adjustment

After a djusting zoom and fo cus, to p revent
water i nltration, rmly tighten the zoom and

focus lever.

Cable Concealed Thru Bracket

8

6. INSTALLATION

• MOUNTING POSITION

360°

90°

* 1st Axis

WARNING !

To prevent i njury, this apparat us must be se curely
att ached to the fl oor/w all in accor dance wi th the

installation instructions.

* 2nd Axis

9

6. INSTALLATION

• MONITOR CONNECTION

(1) DC12V

DC12V POWER SUPPLY

DC12V

(2) AC24V

BNC FEMALE

AC24V

BNC FEMALE

VIDEO IN

AC24V POWER SUPPLY

VIDEO IN

When you install the camera, please glue up the end of cable to
keep it stable in order to protect the camera from the humidity problems.

10

7. DIMENSIONS

Unit(mm)

87

Hi-power LED 5ea

Ø67

88.6

145

129.4

233.8

M12XP 1.25

99

107

Ø65

11

8. SPECIFICATION

Signal Format NTSC PAL
Image Device 1/3" 960H SONY EXview HAD CCD II
Scanning System 2 : 1 Interlace
Scanning Frequency 15.734KHz(H), 59.94Hz(V) 15.625KHz(H), 50Hz(V)

Total Pixels 1020(H) X 508(V) 1020(H) X 596(V)
Effective Pixels 976(H) X 494(V) 976(H) X 582(V)

H.Resolution 750TV Lines
S/N Ratio More than 50dB(AGC OFF)
Min.Illumination 0Lux (IR LED On)
Sync System Internal
Gamma r= 0.45
Video Output Level 1.0 Vp-p Composite(75Ω)
OSD Built in (Inner Key / Joystick)
BLC OFF / BLC / HLC
White Balance ATW / PUSH / USER1 / USER2 / ANTI CR / MANUAL / PUSH-LOCK
2DNR OFF / ON (Level adjustable)
ATR OFF / ON (Level adjustable)
Function MIRROR / BRIGHTNESS / CONTRAST / SHARPNESS / HUE / GAIN
Privacy Masking 4 Zones
Motion Detection 4 Zones
Day & Night AUTO
Lens Aspheric Vari-focal DC IRIS Lens

Language

IP Rating IP66 (Weather proof)
IR LED Hi-power LED 5ea(850nm) - Distance: Up to 45m
Operating Temperature 14°F~122°F(-10°C~+50°C)
Storage Temperature -4°F~140°F(-20°C~+60°C)
Humidity Less than 80%

Power
Consumption

Option DUAL (AC24V / DC12V)
Dimension 67(Ø) x 233.8(mm)

DC12V DC12V ±10% Max.350mA
DUAL DC12V ±10% Max.450mA / AC24V ±10% Max.5.6W

Specications and designs are subject to change for improving

ENGLISH / JAPANESE / GERMAN / FRENCH / RUSSIAN /

PORTUGUESE / SPANISH / CHINESE

the functionality of this product without notice.

12

9. OSD MENU STRUCTURE

MAIN

MENU

1st Sub

MENU

AUTO

SHUTTER

/ AGC

MANUAL

ATW

PUSH

USER1

WHITE
BAL

USER2

ANTI CR

MANUAL

PUSH LOCK

BACK LIGHT OFF,BLC,HLC

MIRROR

BRIGHTNESS

CONTRAST

PIC

SHARPNESS

ADJUST

HUE

GAIN

RETURN

ON

ATR

OFF

*ATR (Adaptive Tone-Curve Reproduction):

The function provides gradation compensation to improve the contrast of subjects both low luminace areas and
high luminance areas exist in the same picture

2st Sub

MENU

HIGH LUMINANCE

LOW LUMINANCE

RETURN

MODE SHUT+AGC

SHUTTER

AGC 6,12,18,24,30,36,42,44.8

RETURN

SPEED (000 ~ 255)

DELAY CNT (000 ~ 255)

ATW FRAME x0.50,x1.00,x1.50,x2.00

ENVIRONMENT INDOOR,OUTDOOR

RETURN

B-GAIN (000 ~ 255)

R-GAIN (000 ~ 255)

RETURN

B-GAIN (000 ~ 255)

R-GAIN (000 ~ 255)

RETURN

LEVEL

RETURN

OFF,ON

(000 ~ 255)

(000 ~ 255)

(000 ~ 255)

(000 ~ 255)

(000 ~ 255)

LUMINANCE LOW,MID,HIGH

CONTRAST LOW,MIDLOW,MID,MIDHIGH,HIGH

RETURN

3st Sub

MENU

MODE AUTO IRIS, SHUT+AUTO IRIS

BRIGHTNESS (000 ~ 255)

MODE AGC,OFF

BRIGHTNESS x0.25,x0.50,x0.75,x1.00

1/50(PAL),1/120(PAL)
1/60(NTSC),1/100(NTSC)
1/250,1/500,1/1000,1/2000
1/4000,1/10000

NTSC:(30 ~ 115)
PAL:(28 ~ 134)

13

4st Sub

MENU

9. OSD MENU STRUCTURE

MAIN

ON

OFF

1st Sub

MENU

MENU

MOTION
DET

NEXT
EXIT
SAVE ALL

PRIVACY ON

NR MODE OFF,Y,C,Y/C
C LEVEL (000 ~ 015)

NR

Y LEVEL (000 ~ 015)
RETURN
ON EDIT MODE

CAMERA
ID

OFF
LANGUAGE ENGLISH, 日本語, DEUTSCH, FRANCAIS,
CAMERA

RESET
BACK
EXIT
SAVE ALL

*Important Note :

• Any changes made to the camera settings must be saved prior to
exiting the OSD menu. Else all changes will be discarded.

2st Sub

MENU

DETECT SENS
BLOCK DISP
MONITOR AREA

AREA SEL

RETURN

AREA SEL

COLOR
TRANSP
MOSAIC
RETURN

RETURN

3st Sub

MENU

(000 ~ 127)

OFF,ON,ENABLE (CONTROLER)

ON,OFF

1/4, 2/4, 3/4, 4/4

TOP

BOTTOM

LEFT

RIGHT

1/4, 2/4, 3/4, 4/4

TOP

BOTTOM

LEFT

RIGHT

(1 ~ 8)

0.00, 0.50, 0.75, 1.00

OFF,ON

Русский,

PORTUGUÊS, ESPAÑOL, 中文

14

4st Sub

MENU

NTSC:(000 ~ 244)
PAL:(000 ~ 288)

NTSC:(000 ~ 244)
PAL:(000 ~ 288)

NTSC:(000 ~ 474)
PAL:(000 ~ 468)

NTSC:(000 ~ 474)
PAL:(000 ~ 468)

NTSC:(000 ~ 244)
PAL:(000 ~ 288)

NTSC:(000 ~ 244)
PAL:(000 ~ 288)

NTSC:(000 ~ 474)
PAL:(000 ~ 468)

NTSC:(000 ~ 474)
PAL:(000 ~ 468)