KT&C KPC-N551 Operation Manual

HIGH PERFORMANCE

Super Night Vision Camera

OPERATION MANUAL

Thank you for choosing our high quality camera.
Before attempting to connect operate this unit, please read and follow these instructions.

M140-N551-001

These servicing instructions are for use by qualied service personnel only.

To reduce the risk of electric shock do not perform any servicing other than that

contained in the operating instructions unless you are qualied to do so.

Use Class 2 Power Supply Only

CAUTION

2

CONTENTS

1. CAUTIONS

2. IMPORTANT SAFETY INSTRUCTION

3. FEATURES

4. COMPONENTS

5. NAME AND FUNCTION

6. INSTALLATION

7. DIMENSIONS

8. SPECIFICATION

9. OSD MENU STRUCTURE

3

1. CAUTIONS

4

1. A regulated DC12V 1A power supply is recommended for use with this camera
for the best picture and the most stable operation.
An unregulated power supply can cause damage to the camera.

When unregulated power supply is applied, product warranty will be
out of subject.

2. It is recommended that the camera is used with a monitor that has a CCTV quality
75 video impedance level.
If your monitor is switched to high impedance then please adjust accordingly.

3. Do not attempt to disassemble the camera to gain access to the internal components.
Refer servicing to your dealer.

4. Never face the camera towards the sun or any bright or reective light, which may

cause smear on the picture and possible damage to the CCD.

5. Do not remove the serial sticker for the warranty service.

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions;

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference
that may cause undesired operation.

Note

This equipment has been tested and found to comply with limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio communications.
However, there is no guarantree that interference will not occur in a particular
installation. If this equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

• Reorient or relocate the receiving antena.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

whice the receiver is connected.

• Consult the dealer or an experienced radio / tv technician for helf.

Caution

Any changes or modications in construction of this devies which are not expressly

approved by the party responsible for compliance could void the user’s authority to
operate the equipment.

1. CAUTIONS

5

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with
separate collection systems)

This marking shown on the product or its literature, indicate that it should not
be disposed with other household wastes at the end of its working life. To
prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources.

This product should not be mixed with other commercial wastes purchased this
product, or their local government ofce, for details of where and how they can

take item for environmentally safe recycling.

Business users should contact their supplier and check the terms and
conditions of the purchase contract.
Household users should contact either the retailer where they for disposal.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER(OR BACK). NO USER. SERVICING
TO QUALIFED SERVICE PERSONNEL.

This symbol is intended to alert the user to the presence of
uninsulated "dangerous voltage" within the product's enclosure that

may be of sufcient mangnitude to constitute a risk of electric shock

to persons.

This symbol is intended to alert the user to the presence of
important operating and maintenance(servicing) instruction in the
literature accompanying the appliance.

2. IMPORTANT SAFETY INSTRUCTION

6

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including ampliers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third

prong are provided for your safety. If the provided plug does not t into your outlet,

consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specied by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specied
by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the

cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long
periods of time.

14) Refer all servicing to qualied service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or plug

is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or

has been dropped.

3. FEATURES

• 1/3" 960H SONY EXview HAD CCD II

• Horizontal Resolution 700TV Lines

• OSD Function

• Multi Language

(ENGLISH / JAPANESE / GERMAN / FRENCH / RUSSIAN / PORTUGUESE / SPANISH / CHINESE)

• 2DNR

• Privacy Zone

• Motion Detect

• ATR(Adaptive Tone-curve Reproduction / Digital WDR)

The function provides gradation compensation to improve the contrast of subjects both
low-luminance areas and high luminance areas exist in the same picture

4. COMPONENTS

SUPER NIGHT
VISION CAMERA

SUNSHIELD

VIDEO OUTPUT
TEST CABLE

L-WRENCH /
SCREW - 3ea /

SUNSHIELD FIXING BOLT

OPERATION MANUAL

7

5. NAME AND FUNCTION

8

①

Sunshield Fixing Bolt

②

Sunshield

③

Mounting Bracket

④

Body

⑤

External Zoom and

Focus adjustment

⑥

LED: 5ea(Hi-power)

⑦

Photo cell

⑧

Lens

Back

Cable Concealed Thru Bracket

External Zoom and Focus adjustment

After adjusting zoom and focus, to prevent
water inltration, rmly tighten the zoom and

focus lever.

①

⑤

③

④

②

⑧

⑤ ⑦

⑥

6. INSTALLATION

• MOUNTING POSITION

9

360°

* 1st Axis

90°

* 2nd Axis

WARNING !

To prevent injury, this apparatus must be securely
attached to the floor/wall in accordance with the

installation instructions.

6. INSTALLATION

• MONITOR CONNECTION

(1) DC12V

(2) AC24V

10

When you install the camera, please glue up the end of cable to
keep it stable in order to protect the camera from the humidity problems.

DC12V

BNC FEMALE

DC12V POWER SUPPLY

VIDEO IN

AC24V

BNC FEMALE

AC24V POWER SUPPLY

VIDEO IN

7. DIMENSIONS

Unit(mm)

11

107

99

Ø65

M12XP 1.25

145

129.4

Ø67

233.8

87

88.6

Hi-power LED 5ea

Signal Format NTSC PAL
Image Device 1/3" 960H SONY EXview HAD CCD II
Scanning System 2 : 1 Interlace
Scanning Frequency 15.734KHz(H), 59.94Hz(V) 15.625KHz(H), 50Hz(V)

Total Pixels 1020(H) X 508(V) 1020(H) X 596(V)
Effective Pixels 976(H) X 494(V) 976(H) X 582(V)

H.Resolution 750TV Lines
S/N Ratio More than 50dB(AGC OFF)
Min.Illumination 0Lux (IR LED On)
Sync System Internal
Gamma r= 0.45
Video Output Level 1.0 Vp-p Composite(75Ω)
OSD Built in (Inner Key / Joystick)
BLC OFF / BLC / HLC
White Balance ATW / PUSH / USER1 / USER2 / ANTI CR / MANUAL / PUSH-LOCK
2DNR OFF / ON (Level adjustable)
ATR OFF / ON (Level adjustable)
Function MIRROR / BRIGHTNESS / CONTRAST / SHARPNESS / HUE / GAIN
Privacy Masking 4 Zones
Motion Detection 4 Zones
Day & Night AUTO
Lens Aspheric Vari-focal DC IRIS Lens

Language

ENGLISH / JAPANESE / GERMAN / FRENCH / RUSSIAN /

PORTUGUESE / SPANISH / CHINESE

IP Rating IP66 (Weather proof)
IR LED Hi-power LED 5ea(850nm) - Distance: Up to 45m
Operating Temperature 14°F~122°F(-10°C~+50°C)
Storage Temperature -4°F~140°F(-20°C~+60°C)
Humidity Less than 80%

Power
Consumption

DC12V DC12V ±10% Max.350mA

DUAL DC12V ±10% Max.450mA / AC24V ±10% Max.5.6W
Option DUAL (AC24V / DC12V)
Dimension 67(Ø) x 233.8(mm)

Specications and designs are subject to change for improving

the functionality of this product without notice.

12

8. SPECIFICATION

MAIN

MENU

1st Sub

MENU

2st Sub

MENU

3st Sub

MENU

4st Sub

MENU

SHUTTER

/ AGC

AUTO

HIGH LUMINANCE

MODE AUTO IRIS, SHUT+AUTO IRIS

BRIGHTNESS (000 ~ 255)

LOW LUMINANCE

MODE AGC,OFF

BRIGHTNESS x0.25,x0.50,x0.75,x1.00

RETURN

MANUAL

MODE SHUT+AGC

SHUTTER

1/50(PAL),1/120(PAL)
1/60(NTSC),1/100(NTSC)
1/250,1/500,1/1000,1/2000
1/4000,1/10000

AGC 6,12,18,24,30,36,42,44.8

RETURN

WHITE
BAL

ATW

SPEED (000 ~ 255)

DELAY CNT (000 ~ 255)

ATW FRAME x0.50,x1.00,x1.50,x2.00

ENVIRONMENT INDOOR,OUTDOOR

RETURN

PUSH

USER1

B-GAIN (000 ~ 255)

R-GAIN (000 ~ 255)

RETURN

USER2

B-GAIN (000 ~ 255)

R-GAIN (000 ~ 255)

RETURN

ANTI CR

MANUAL

LEVEL

NTSC:(30 ~ 115)
PAL:(28 ~ 134)

RETURN

PUSH LOCK

BACK LIGHT OFF,BLC,HLC

PIC

ADJUST

MIRROR

OFF,ON

BRIGHTNESS

(000 ~ 255)

CONTRAST

(000 ~ 255)

SHARPNESS

(000 ~ 255)

HUE

(000 ~ 255)

GAIN

(000 ~ 255)

RETURN

ATR

ON

LUMINANCE LOW,MID,HIGH

CONTRAST LOW,MIDLOW,MID,MIDHIGH,HIGH

RETURN

OFF

*ATR (Adaptive Tone-Curve Reproduction):

The function provides gradation compensation to improve the contrast of subjects both low luminace areas and
high luminance areas exist in the same picture

13

9. OSD MENU STRUCTURE

9. OSD MENU STRUCTURE

14

MAIN

MENU

1st Sub

MENU

2st Sub

MENU

3st Sub

MENU

4st Sub

MENU

MOTION
DET

ON

DETECT SENS

(000 ~ 127)

BLOCK DISP

OFF,ON,ENABLE (CONTROLER)

MONITOR AREA

ON,OFF

AREA SEL

1/4, 2/4, 3/4, 4/4

TOP

NTSC:(000 ~ 244)
PAL:(000 ~ 288)

BOTTOM

NTSC:(000 ~ 244)
PAL:(000 ~ 288)

LEFT

NTSC:(000 ~ 474)
PAL:(000 ~ 468)

RIGHT

NTSC:(000 ~ 474)
PAL:(000 ~ 468)

RETURN

OFF
NEXT
EXIT
SAVE ALL

PRIVACY ON

AREA SEL

1/4, 2/4, 3/4, 4/4

TOP

NTSC:(000 ~ 244)
PAL:(000 ~ 288)

BOTTOM

NTSC:(000 ~ 244)
PAL:(000 ~ 288)

LEFT

NTSC:(000 ~ 474)
PAL:(000 ~ 468)

RIGHT

NTSC:(000 ~ 474)
PAL:(000 ~ 468)

COLOR

(1 ~ 8)

TRANSP

0.00, 0.50, 0.75, 1.00

MOSAIC

OFF,ON

RETURN

NR

NR MODE OFF,Y,C,Y/C

C LEVEL (000 ~ 015)

Y LEVEL (000 ~ 015)

RETURN

CAMERA
ID

ON EDIT MODE

RETURN

OFF
LANGUAGE ENGLISH, 日本語, DEUTSCH, FRANCAIS,

Русский,

PORTUGUÊS, ESPAÑOL, 中文

CAMERA
RESET

BACK
EXIT
SAVE ALL

*Important Note :

• Any changes made to the camera settings must be saved prior to
exiting the OSD menu. Else all changes will be discarded.