KT&C KPC-EW38NU User Manual
M144-EW38U-001
HIGH PERFORMANCE
SQUARE CAMERA
OPERATION MANUAL
Thank you for choosing our high quality camera. Before
attempting to connect or operate, please read and follow these
instructions.
CAUTIONS
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other
European countries with separate collection systems)
This marking shown on the product or its literature, indicate that it should
not be disposed with other household wastes at the end of its working
life. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate this from other types of
wastes and recycle it responsibly to promote the sustainable reuse of
material resources.
This product should not be mixed with other commercial wastes purchased
this product, or their local government ofce, for details of where and how
they can take item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract.
Household users should contact either the retailer where they for disposal.
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER(OR BACK). NO USER.
SERVICING TO QUALIFED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK DO NOT OPEN
This symbol is intended to alert the user to the presence
of uninsulated "dangerous voltage" within the product's
enclosure that may be of sufcient mangnitude to constitute
a risk of electric shock to persons.
This symbol is intended to alert the user to the presence of
important operating and maintenance(servicing) instruction in
the literature accompanying the appliance.
CAUTION
These servicing instructions are for use by qualied service personnel only. To reduce the risk of electric shock do not
perform any servicing other than that contained in the operating instructions unless you are qualied to do so.
Use Class 2 Power Supply Only.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions;
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
-
Note
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference at his own expense.”
WARNING -
This is a class A product. In a domestic environment this product may cause radio interference in which case the user
may be required to take adequate measures.
Caution -
Any changes or modications in construction of this devices which are not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
1. A regulated DC12V 300mA power supply is recommended for use with this camera for the best picture and the most stable operation.
An unregulated power supply can cause damage to the camera. When unregulated power supply is applied,
product warranty will be out of subject.
2. It is recommended that the camera is used with a monitor that has a CCTV quality 75 video impedance level.
If your monitor is switched to high impedance then please adjust accordingly.
3. Do not attempt to disassemble the camera to gain access to the internal components. Refer servicing to your dealer.
4. Never face the camera towards the sun or any bright or reective light, which may cause smear on the picture and
possible damage to the CCD.
5. Do not remove the serial sticker for the warranty service.
CAUTION
IMPORTANT SAFETY INSTRUCTION
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat
registers,stoves, or other apparatus (including ampliers) that
produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding- type plug. A polarized plug has two blades with one wider
than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided for
your safety. If the provided plug does not t into your outlet, consult
an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit from
the apparatus.
11) Only use attachments/accessories specied by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or
table specied by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination
to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for
long periods of time.
14) Refer all servicing to qualied service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been
dropped.
Square
Camera
Mounting
Bracket
Screw
Operation
Manual
Cable
Tapping
3 x 8 (2ea)
Ø
Machine
M2 x 2.5(4ea)
MOUNTING POSITIONCOMPONENTS
CONNECTION
UP
MENU
(SELECTION KEY)
RIGHT
LEFT
DOWN
Mounting
bracket
Machine Screw:
M2 x 2.5
Camera
Tapping Screw:
3 x 8
Ø
❶ ❶
CAUTION !
Please start installing
in the order shown.
❷
OSD Control Joystick
Power / RS485
DIY CABLE CONNECTION
WHITE(RS-485(+))
BLACK(RS-485(-))
12V REGULATED
POWER SUPPLY
VIDEO IN
TV MONITOR
OSD MENU STRUCTURE
MAIN MENU 1st Sub MENU 2nd Sub MENU 3rd Sub MENU 4th Sub MENU 5th Sub MENU
AUTO
EXPOSURE
MANUAL
PUSH
ATW
PUSH LOCK
WDR MODE OFF, ON
BLC MODE OFF, ON
HLC MODE OFF, ON, AUTO
2DNR MODE OFF, ON
2DNR LEVEL 000 ~ 015
DNR
3DNR MODE OFF, ON
3DNR LEVEL 000 ~ 063
CONTRAST 000 ~ 063
SHARPNESS 000 ~ 015
USER1
USER2
ANTI CR
MANUAL
COLOR
AUTO
BW
RETURN
HV-FLIP OFF, ON
FREEZE OFF, ON
EZOOM
RETURN
WHITE BAL
DAY&NIGHT
WDR / BLC
IMAGE
HIGH
LUMINANCE
LOW
LUMINANCE
RETURN
MODE SHUT, SLOW
SHUT
AGC 6, 12, 18, 24, 30, 36, 42, 44.8
RETURN
SPEED 000 ~ 255
DELAY CNT 000 ~ 255
ATW FRAME x0.5, x1.0, x1.5, x2.0
ENVIRONMENT INDOOR,OUTDOOR
RETURN
B-GAIN 000 ~ 255
R-GAIN 000 ~ 255
RETURN
B-GAIN 000 ~ 255
R-GAIN 000 ~ 255
RETURN
LEVEL UP PUSH ENTER
LEVEL DOWN PUSH ENTER
PRESET
RETURN
BURST OFF, ON
DELAY CNT 000 ~ 255
DAY -> NIGHT 000 ~ 255
NIGHT ->DAY 000 ~ 255
RETURN
BURST OFF, ON
RETURN
1.0x, 1.5x, 2.0x,
2.5x, 3.0x
FLICKERLESS OFF / ON
BRIGHTNESS 000 ~ 255
MODE
AGC MAX 6, 12, 18, 24, 30, 36
DSS MAX 2, 4, 8, 16, 32, 64, 128, 256
BRIGHTNESS x0.25, x0.5, x0.75, x1.0
SHUT MODE ONLY
1/50(PAL), 1/60(NTSC),
1/100(NTSC), 1/120(PAL),
1/250, 1/500, 1/1000,
1/2000, 1/4000, 1/10000
SLOW MODE ONLY
2, 4, 8, 16, 32, 64, 128, 256
LEVEL 000 ~ 015
CONTRAST1 000 ~ 007
CONTRAST2 000 ~ 004
RETURN
BLC ZONE
LEVEL 000 ~ 015
RETURN
CLIP LEVEL 000 ~ 255
SCALE 000 ~ 015
RETURN
AGC, SLOW, AGC→SLOW,
SLOW→AGC, OFF
CENTER, TOP, BOTTOM,
LEFT, RIGHT
MAIN MENU 1st Sub MENU 2nd Sub MENU 3rd Sub MENU 4th Sub MENU 5th Sub MENU
SAVE&EXIT
SPECIAL
FACTORY
DEFAULT
EXIT
CAMERA TITLE OFF, ON
LANGUAGE ENGLISH /
COMM ADJUST
PRIVACY
MOTION DET OFF, ON
BAUDRATE 2400 / 4800 / 9600 / 19200 / 38400 bps
ID DISPLAY OFF, ON
APPLY & RETURN
AREA SEL 1/15 ~ 15/15
POSITION NEXT:PUSH ENTER
TRANSP ARENCY 0.00, 0.50, 0.75, 1.00
DISPLAY THE TITLE EDITING MENU
RETURN
/ ESPAÑOL / DEUTSCH / FRANCAIS / PORTUGUÊS /
Русский
CAM ID 001 ~ 255
MODE OFF, ON
WHITE, BLACK, RED, GREEN, BLUE,
COLOR
MOSAIC OFF, ON
RETURN
YELLOW, CYAN, MAGENTA
DETECT SENCE 000 ~ 127
BLOCK DISP OFF, ON
DETECT AREA EXIT: HOLD ENTER
MONITOR AREA
日本語
AREA SEL 1/4 ~ 4/4
MODE OFF, ON
TOP 000 ~ 015
BOTTOM 000 ~ 015
LEFT 000 ~ 023
RIGHT 000 ~ 023
RETURN
SPECIFICATION
Signal Format NTSC PAL
Image Device 1/3” 960H SONY Double Scan Super HAD CCD II
Scanning System 2 : 1 Interlace
Scanning Frequency H:15.734KHz, V:59.94Hz H:15.625KHz, V:50Hz
Total Pixels 1028(H) X 508(V) 1028(H) X 596(V)
Effective Pixels 976(H) X 494(V) 976(H) X 582(V)
H.Resolution 750TV Lines
Electronic Shutter 1/60 ~ 1/100,000sec 1/50 ~ 1/100,000sec
S/N Ratio More than 50dB (AGC OFF, 3DNR ON)
Min.Illumination Color:0.1Lux (30IRE@F2.0, AGC 36dB) 0.000001Lux (DSS x256)
Gamma
Video Output 1.0 Vp-p Composite(75Ω)
Sync System Internal
Lens Board Lens
Digital Zoom Ratio 3x
Digital Slow Shutter OFF, 2 ~ 256 Field
Flickerless ON / OFF
WDR ON / OFF (Level adjustable)
BLC ON / OFF (Level adjustment, Area selection)
HLC ON / AUTO / OFF (Level adjustable)
AGC OFF, 6 ~ 36dB
DNR(2D/3D) ON / OFF (Level adjustable)
Image Function Image reverse (Normal / Flip), Freeze, Contrast, Sharpness
Day & Night COLOR / BW / AUTO (DIGITAL D/N)
Motion Detection 4 Zones (Level adjustable, Area adjustment)
Privacy Masking 15 Zones (Area adjustment)
White Balance ATW / PUSH / USER1 / USER2 / ANTI CR / MANUAL / PUSH-LOCK
OSD Built in (Joystick)
RS-485 Protocol (Pelco-D)
Operating Temperature 14°F ~ 122°F (-10°C ~ +50°C)
Storage Temperature -4°F ~ 140°F (-20°C ~ +60°C)
Humidity Less than 80%
Power Consumption DC 12V (±10%) Max 140mA
Weight Approx. 131g
Dimension(mm) 38 (W) x 38 (H)
Specications and designs are subject to change for improving the functionality of this product without notice.
γ
=0.45
Pelco “D” Protocol Commands
BYTE1 BYTE2 BYTE3 BYTE4 BYTE5 BYTE6 BYTE7
0xFF CamID 0x00 0x08 0x00 0x00 CS
UP
0xFF CamID 0x00 0x10 0x00 0x00 CS
DOWN
LEFT
0xFF CamID 0x00 0x04 0x00 0x00 CS
RIGHT
0xFF CamID 0x00 0x02 0x00 0x00 CS
0xFF CamID 0x02 0x00 0x00 0x00 CS
SET
* Sync Byte : FFh(BYTE1)
* Address : Camera ID (001~255) (01h ~ FFh)
* Check sum : It is 8 bit(module 256) sum of the payload
bytes(BYTE2~BYTE6)
BYTE7 = BYTE2+…+BYTE6
ex) if BYTE2+…+BYTE6 = 1FCh, then BYTE7 = FCh
DIMENSIONS
Unit(mm)
38.5
2919.4
38.5
14
Ø
APPROX. 35
Loading...