KT&C KPC-E190NU User Manual

M132-E190-001

HIGH PERFORMANCE BULLET CAMERA

OPERATION MANUAL

Thank you for choosing our high quality camera.
Before attempting to connect operate this unit, please read and follow these instructions.

ACCESSORIES FURNISHED

Bullet Camera Screw 3ea

Mounting Bracket Operation Manual

SPECIFICATIONS

Signal Format

Image Device

Scanning System

H.Resolution

Scanning Frequency

Total Pixels

Effective Pixels

Electronic Shutter

S/N Ratio

Gamma

Min. Illumination

Sync System

Video Output

2DNR

Power Consumption

Temperature

Operating

Storage

Humidity

Lens

Option

Specications and designs are subject to change for improving the functionality of this product without notice.

NTSC PAL

1/3" 960H SONY EXview HAD CCD II

2 : 1 Interlace

750TV Lines

15.734KHz(H), 59.94Hz(V) 15.625KHz(H), 50Hz(V)

1020(H) X 508(V) 1020(H) X 596(V)

976(H) X 494(V) 976(H) X 582(V)

1/60 ~ 1/100,000 sec 1/50 ~ 1/100,000 sec

More than 50dB(AGC OFF)

r =0.45

0.1Lux

Internal

1.0 Vp-p Composite 75(Ω)

ON

DC 12V (±10%), Max 70mA

14F ~ 122F(-10℃ ~ +50

-4F ~ 140F(-20℃ ~ +60

℃)
℃)

Less than 80%

Board Lens, Pinhole Lens

Digital Day & Night

DIMENSIONS

Unit : mm

Ф

19

Ф

19

16

54.8

1/4” - 20UNC

INSTALLATION

When you install the camera, please glue up the end of cable to keep it stable.
This is for protecting the camera from the humidity problems.

Ф

19

Ф

Ф

19

45.0

45.0

19

37.0

40.8

• MONITOR CONNECTION• MOUNTING POSITION

BNC FEMALE

DC12V

1/4"-20 UNC

50

50.5

VIDEO IN

DC12V POWER SUPPLY

Ф

40

28.6

TV MONITOR

3-Ф3.2

28.8

CAUTION

These servicing instructions are for use by qualified service personnel only.

To reduce the risk of electric shock do not perform any servicing other than that contained in the
operating instructions unless you are qualified to do so.

Use Class 2 Power Supply Only.

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions;

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired operation.

Note

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when

the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.”

WARNING

This is a class A product. In a domestic environment this product may cause radio interference in which

case the user may be required to take adequate measures.

Caution

Any changes or modifications in construction of this devices which are not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.

1. A regulated DC12V 300mA power supply is recommended for use with this camera for the best picture and the
most stable operation.

An unregulated power supply can cause damage to the camera. When unregulated power supply is applied,
product warranty will be out of subject.

2. It is recommended that the camera is used with a monitor that has a CCTV quality 75 video impedance level. If
your monitor is switched to high impedance then please adjust accordingly.

3. Do not attempt to disassemble the camera to gain access to the internal components. Refer servicing to your
dealer.

4. Never face the camera towards the sun or any bright or reective light, which may cause smear on the picture and

possible damage to the CCD.

5. Do not remove the serial sticker for the warranty service.

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems)

This marking shown on the product or its literature, indicate that it should not be disposed with
other household wastes at the end of its working life. To prevent possible harm to the environment

or human health from uncontrolled waste disposal, please separate this from other types of

wastes and recycle it responsibly to promote the sustainable reuse of material resources.
This product should not be mixed with other commercial wastes purchased this product, or their
local government ofce, for details of where and how they can take item for environmentally safe

recycling. Business users should contact their supplier and check the terms and conditions of the
purchase contract. Household users should contact either the retailer where they for disposal.

CAUTION

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufcient mangnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operating and

maintenance(servicing) instruction in the literature accompanying the appliance.

RISK OF ELECTRIC SHOCK DO NOT OPEN

NOT REMOVE COVER(OR BACK). NO USER.
SERVICING TO QUALIFED SERVICE PERSONNEL.

CAUTION

IMPORTANT SAFETY INSTRUCTION

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat

registers,stoves, or other apparatus (including ampliers) that produce heat.

9) Do not defeat the safety purpose of the polarized or

grounding- type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has
two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specied by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specied by

the manufacturer, or sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for
long periods of time.

14) Refer all servicing to qualied service personnel. Servicing is
required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.