KT&C KPC DH100 Operation Manual

Thank you for choosing our high quality camera.
Before attempting to connect or operate, please read and follow
these instructions.

HIGH RESOLUTION

DOME CAMERA

OP ERAT ION MAN UAL

M088-DH100-001

1. CAU TIO NS .. .... ... .... ... .... .. 3

2. FEA TUR ES .. .... ... .... ... .... .. 5

3. COM PON ENTS .. ..... .. . .. . .. ... ... . 7

4. N A ME AN D F UNC TIO N .. .. . .. . .. ... ... ... .. . 8

5. P A RT NA ME .. .. . .. . .. ... ... ... .. . 9

6. I N ST A LL ATI ON .. .. . .. . .. ... ... ... . 10

7. D I ME N SI ONS .. .. . .. . .. . .. ... ... . 11

8. S P EC I FI CAT ION .. .. . .. . .. ... ... ... . 12

9. O S D M AN UAL .. .. . .. . .. ... ... ... . 13

- GE N ER A L STR UCT URE .. .. . .. . .. ... ... ... . 13

- OS D F U NC TIO N D ESC RI P TI O N .. .. . .. . 18

3

CONTENTS

4

This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions;

1. This device may not cause harmful interference.

2. This device must accept any interference received, including
interference that may cause undesired operation.

Note -

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.”

WARNING -

This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.

Caution -

Any changes or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user’s authority to
operate the equipment.

1. A regulated DC12V 1A power supply is recommended for use with this camera
for the best picture and the most stable operation.
An unregulated power supply can cause damage to the camera.

When unregulated power supply is applied, product warranty will be
out of subject.

2. It is recommended that the camera is used with a monitor that has a CCTV quality
75 video impedance level.
If your monitor is switched to high impedance then please adjust accordingly.

3. Do not attempt to disassemble the camera to gain access to the internal
components. Refer servicing to your dealer.

4. Never face the camera towards the sun or any bright or reective light, which may

cause smear on the picture and possible damage to the CCD.

5. Do not remove the serial sticker for the warranty service.

1.CAUTIONS

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with
separate collection systems)

This marking shown on the product or its literature, indicate that it should not
be disposed with other household wastes at the end of its working life. To
prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources.

This product should not be mixed with other commercial wastes purchased this

product, or their local government ofce, for details of where and how they can

take item for environmentally safe recycling.

Business users should contact their supplier and check the terms and
conditions of the purchase contract.
Household users should contact either the retailer where they for disposal.

1.CAUTIONS

5

• 1/3" 410K/470K Sony Super-HAD CCD

Ⅱ

Minimum illumination

- Standard type: 0.00001 Lux(F1.6, 30 IRE, Sense-Up X256, AGC high)

- LED type: 0 Lux ( IR LED On) S/N Ratio 50 dB

• High Resolution 600TV Lines

• 3D DNR (3D Digital Noise Reduction)

• True Day&Night

• Privacy Mask Function

• OSD (On Screen Display)

• 3-Axis Gimbal

OPTION

• AC24V / DC12V Dual Voltage

2.FEATURES

6

• 3-Axis Gimbal

The Service Video Connector also provides
the installer with an easy way of configuring
the camera.

• Service Video connector

2. FEATURES

7

1 DOME CAMERA

2 VIDEO OUTPUT TEST CABLE

3 OPERATION MANUAL

4 SCREW - 3ea

5 MOUNT GUIDE

8

3. COMPONENTS

• Name (LED Type)

• Name (Standard)

4. NAME AND FUNCTION

9

Func t ion S e tup S w itch

Serv i ce Vi d eo Co n necto r

Phot o Cell

IR L E D 30e a

Func t ion S e tup S w itch

Serv i ce Vi d eo Co n necto r

NO

PART NAME

STANDARD Type LED Type

1 Mount Guide

2 Housing Bottom

3 Holder Panning

4 Holder Tlit

5 Holder Rotate

6 Cover Sun Shield Cover LED

7 Housing Top

8 Cover, Dome

5. PART NAME

10

BNC FEM A LE
VID E O

VID E O I N

DC 1 2V P OWE R SU P PLY

BNC FEM A LE
VID E O

VID E O I N

DC 1 2V / AC 24V
DUA L PO W ER S UPP L Y

When you install the camera, please glue up the end of cable to
keep it stable in order to protect the camera from the humidity problems.

• DUAL(DC12V/AC24V)

• DC12V

6. INSTALLATION

11

• MONITOR CONNECTION

Ø

136.4

45

95.3

Ø

100

Unit : mm

7. DIMENSIONS

12

8. SPECIFICATION

13

STANDA RD TY P E

Signal Format NTSC PAL

Image Device

1/3" Sony Super HAD CCD

Ⅱ

Scanning System

2:1 Interlace

Scanning Frequency

H:15.734KHz, V:59.94Hz H:15.625KHz, V:50Hz

Total Pixels 811(H) x 508(V) 795(H) x 596(V)

Effective Pixels 768(H) x 494(V) 752(H) x 582(V)

Electronic Shutter Speed 1/60 sec 1/50 sec

H.Resolution 600TV Lines

Min. Illumination 0.00001 Lux / F1.2 ( Sense-up )

S/N Ratio More than 50dB(AGC Off)

Sync System Internal

Gamma r=0.05 ~1.0 Adjustable / USER

Manual Shutter

1/60(50), FLK, 1/250, 1/500, 1/2K, 1/5K, 1/10K, 1/100K

X2, X4, X8, X16, X32, X64, X128, X256

Sense-up Off / Auto (X2, X4, X8, X16, X32, X64, X128, X256)

AGC Off / Low / Middle / High

BLC Off / BLC / HSBLC

Whi t e B a lan ce ATW / PUSH / PUSH-LOCK / MANUAL / INDOOR / OUTDOOR

Day&Night True Day & Night With ICR Mechanism

Motion Detection Zone 4ea(Mask On / Off)

Privacy Zone Zone 8ea(Mask On / Off)

3-DNR Off / On(0~100 Level Adjustable)

D-WDR Off / Indoor / Outdoor

Image Freeze / Mirror / D-zoom / Sharpness / Color gain / Gamma / NEG.Image

OSD Available

Language

Standard: English, French, Russian,German, Spanish, Dutch

Option1: English, Chinese / Option2: English, Japanese

Video Output 1.0 Vp-p Composite 75(Ω) unbalanced

Power
Consumption

DC12V DC 12V (±10%) Max 170mA

Dual DC 12V (±10%) 210mA, AC 24V (±10%) 2.9W

Operating Temperature 14˚F~122˚F(-10˚C ~ +50˚C)

Storage Temperature -4˚F~140˚F(-20˚C ~ +60˚C)

Operating Humidity 10% ~80%

Options Dual Power

Weight

343g

LED T Y PE

Power
Consumption

DC12V DC 12V (±10%) Max 440mA

Dual DC 12V (±10%) 550mA / AC 24V (±10%) 6.3W

Min. Illumination 0 Lux (IR LED ON)

IR LED

850nm, 30ea, Up to 30 m

IR LED Operation On : 1 Lux, Off : 3 Lux

9. OSD MANUAL

14

SETUP MENU

LEN S

•BRIGHTNESS •RETURN

EXP O SU R E

•SHUTTER •BRIGHTNESS •AGC

•SENSE-UP •BLC •D-WDR

•RETURN

WHI T E B AL

•ATW •PUSH •PUSH-LOCK

•MANUAL •INDOOR •OUTDOOR

DAY & NI G HT

•COLOR •B/W •AUTO

IMA G E

•FREEZE •MIRROR •D-ZOOM

•SHARPNESS •COLOR GAIN

•GAMMA •NEG.IMAGE •RETURN

3DN R

•LEVEL •RETURN

SPE C IA L

•CAM TITLE •LANGUAGE

•MOTION •PRIVACY •SYNC

•RETURN

RES E T

EXI T

• GENERAL STRUCTURE

OSD STRUCTURE

•

UP,DOWN

:

Menu up / down

•

LEFT,RIGH T

:

Set-up Key

•

MENU

:

MENU

(SEL E CTION KEY)

LEFT

UP

RIGH T

DOWN

MENU

9. OSD MANUAL

15

LENS MENU STRUCTURE

EXPOSURE MENU STRUCTURE

LENS

→

DC

→

BRIGHT

→

1~100

↕

EXPOSURE

↕

WHITE BAL

↕

DAY NIGHT

↕

IMAGE

↕

3DNR

↕

SPECIAL

↕

RESET

↕

EXIT

LENS SHUTTER

→

X256 ~1/100K

↕ ↕

EXPOSURE

→

AGC

→

LOW, MIDDLE, HIGH

↕ ↕

WHITE BAL SENSE-UP

→

X2 ~ X256

↕ ↕

GAIN, LEFT/RIGHT, WIDTH,

TOP/BOTTOM, HEIGNT

DAY NIGHT BLC

→

BLC

→

↕ ↕

IMAGE

↕

HSBLC

→

LEVEL, LEFT/RIGHT, WIDTH,

TOP/BOTTOM, HEIGNT

↕

3DNR D-WDR

→

INDOOR, OUTDOOR

↕

SPECIAL

↕

RESET

↕

EXIT

9. OSD MANUAL

16

WHITE BALANCE MENU STRUCTURE

DAY & NIGHT MENU STRUCTURE

LENS

↕

EXPOSURE

↕

WHITE BAL

→

ATW

↕ ↕

DAY NIGHT PUSH

↕ ↕

IMAGE P-LOCK

↕ ↕

3DNR MANUAL

→

BLUE 1~ 100

↕ ↕ ↕

SPECIAL INDOOR RED 1~ 100

↕ ↕

RESET OUTDOOR

↕

EXIT

LENS

↕

EXPOSURE

↕

WHITE BAL

↕

DAY NIGHT

→

AUTO

↕ ↕

IMAGE B/W

→

BURST

→

ON / OFF

↕ ↕

3DNR COLOR

↕

SPECIAL

↕

RESET

↕

EXIT

9. OSD MANUAL

17

IMAGE MENU STRUCTURE

3DNR MENU STRUCTURE

LENS FREEZE

→

ON/OFF

↕ ↕

EXPOSURE MIRROR

→

MIRROR

↔

V-FLIP

↔

ROATE

↕ ↕

WHITE BAL D-ZOOM

→

x1 ~ x32

↔

PAN -100~100

↔

TILT -100~100

↕ ↕

DAY NIGHT SHARPNESS

→

0 ~ 31

↕ ↕

IMAGE

→

COLOR GAIN

→

BLUE 1 ~100

↔

RED 1 ~100

↕ ↕

3DNR GAMMA

→

0.05~1

↕ ↕

SPECIAL NEG.IMAGE

→

ON/OFF

↕

RESET

↕

EXIT

LENS

↕

EXPOSURE

↕

WHITE BAL

↕

DAY NIGHT

↕

IMAGE

↕

3DNR

→

ON

→

LEVEL

→

1~100

↕

SPECIAL

↕

RESET

↕

EXIT

9. OSD MANUAL

18

SPECIAL MENU STRUCTURE

LENS

↕

EXPOSURE

↕

WHITE BAL

CAM TITLE

→

ON / OFF

↔

POSITION CONTROL

↕

↕

DAY NIGHT

LANGUAGE

→

ENGLISH

↔

FRANÇAIS

↔

РУССКИЙ

↔

ESPAÑOL

↔

DEUTSCH

↕

IMAGE

ON /
OFF

AREA

SEL

AREA

DISPLAY

LEFT /

RIGHT

WIDTH

TOP /

BOTTOM

↕

MOTION

→ ↔ ↔ ↔ ↔ ↔

3DNR

↕

↕

AREA 1~4 ON/OFF

MOTION

VIEW

↔

SENSITIVITY

↔

HEIGHT

SPECIAL

→

PRIVACY

→

AREA SEL

↔

AREA DISPLAY

↔

LEFT/RIGHT

↔

WIDTH

↔

TOP/BOTTOM

↕ ↓ ↓ ↕

RESET

AREA 1~8

ON/OFF

COLOR

↔

HEIGHT

↕

EXIT

SYNC

→

INT

RESET MENU STRUCTURE

LENS

↕

EXPOSURE

↕

WHITE BAL

↕

DAY NIGHT

↕

IMAGE

↕

3DNR

↕

SPECIAL

↕

RESET

→

FACTORY RESET

↕

EXIT

9. OSD MANUAL

19

• OSD FUNCTION DESCRIPTION

1.LENS

- LEVEL DC
BRIGHTNESS : Enable user to select the DC level for Brightness of image(1~100).

2. EXPOSURE

: Enable user to set up the function of SHUTTER, AGC.

- SHUTTER

• FLK : Enable user to set up the FLICKERLESS.(NTSC: 1/100, PAL: 1/120).

• FIXED : Enable user to set up the Shutter Speed.
> 1/60(50), 1/250, 1/500, 1/2K, 1/5K, 1/10K, 1/100K.
* ( ) is for PAL TYPE.

- BRIGHTNESS : Enable user to set up the MANUAL electronic Shutter value.

- AGC : Enable user to make imager bright to amplify the Gain.

- SENSE-UP : Low-speed shutter control.

- BLC : The Function of Back Light Compensation.

• HSBLC : Highlight Suppression BLC will darken image portions for clearer images.

- D-WDR : allows every detail to be captured accurately
even if one portion is bright while other portions are dark.

LENS

BRIGHT 50
RETURN RET

┛

EXPOSURE

SHUTTER 1/60
BRIGHTNESS 50
AGC OFF
SENSE-UP AUTO
BLC BLC

┛

D-WDR OFF
RETURN RET

┛

9. OSD MANUAL

20

3. WHITE BALANCE

: Enable user to represent the accurate white color by controlling the R.G.B level.

• ATW :

Enable user to trace the White Balance automatically in the Wide range

(2,500K ~ 9,500K).

• PUSH :

Enable user to trace the White Balance automatically in all the range.

• P-LOCK :

Enable user to set up automatically readjusted only at the request of the user.

• MANUAL

: Enable user to set the RED GAIN or BLUE GAIN.

• INDOOR

: Enable user to set up 3,200K base mode.

• OUTDOOR

: Enable user to set up 5,400K base mode.

4. DAY&NIGHT

: Conversion of output image COLOR/BW depending on exterior environment.

- AUTO : Enable user to change DAY&NIGHT mode automatically.

- B/W : Enable user to x the output image in B/W.

• BURST ON/OFF : Select the burst signal ON/OFF
when Night condition.

- COLOR : Enable user to x the output image in COLOR.

WHITE BAL MANUAL

BLUE 24
RED 32
RETURN RET

┛

9. OSD MANUAL

21

5. IMAGE

:Setting up the FREEZE, MIRROR, D-ZOOM, SHARPNESS, COLOR GAIN,
GAMMA, NEGATIVE IMAGE.

- FREEZE : Setting of moving images in freeze-frame mode.

- MIRROR

• MIRROR : Enable user to set up reversed LEFT and RIGHT image.

• V-FLIP : Enable user to set up vertically ipped video.

• ROTATION : Enable user to set up 180-degree rotation lp function.

- D-ZOOM : Enable user to expand one part of the monitor screen for viewing.

- SHARPNESS : Enable user to set up sharpness control.

- COLOR GAIN : Enable user to set the RED GAIN or BLUE GAIN.

- GAMMA : Enable user to set up compensation according to gamma value.

- NEG.IMAGE : Enable user to set up negative image ON/OFF.

6. 3DNR

: Three-dimensional noise reduction.

- LEVEL : Enable user to set up noise reduction level.

IMAGE

FREEZE OFF
MIRROR OFF
D-ZOOM ON

┛

SHARPNESS 5
COLOR GAIN

┛

GAMMA 0.45
NEG.IMAGE OFF
RETURN RET

┛

3DNR

LEVEL 50
RETURN RET

┛

9. OSD MANUAL

22

7. SPECIAL

: Setting up the CAM TITLE, LANGUAGE, MOTION, PRIVACY, SYNC.

- CAMERA TITLE : Display the title editing menu.

- LANGUAGE : Enable user to set up Language for OSD.

• Standard: English, Russian, Spanish, German, French, Dutch

• Option1: English, Chinese / Option2: English, Japanese

- MOTION : The camera monitors the movement of image,

and it sends an alarm signal or OSD icon.

• AREA SELECT : Enable user to select the 4 motion area.

• AREA DISPLAY : Enable user to set up ON/OFF in selected area

• LEFT/RIGHT : Enable user to set up LEFT/RIGHT position in selected area.

• WIDTH : Enable user to set up width in selected area.

• TOP/BOTTOM : Enable user to set up TOP/BOTTOM position in selected area.

• HEIGHT : Enable user to set up height in selected area.

• SENSITIVITY : Enable user to set up the movement detection threshold value.

• MOTION VIEW : Display the motion area on the screen.

- PRIVACY : Privacy is the function that covers the some part on screen to prevent

private life Maximum 8 point covered.

• AREA SELECT : Enable user to set up a area from 1 to 8.

• AREA DISPLAY : Enable user to set up ON/OFF in selected area.

• LEFT/RIGHT : Enable user to set up LEFT/RIGHT position in selected area.

• WIDTH : Enable user to set up width in selected area.

• TOP/BOTTOM : Enable user to set up TOP/BOTTOM position in selected area.

• HEIGHT : Enable user to set up height in selected area.

• COLOR : Enable user to set up MASK COLOR.

- SYNC : Synchronization pulses for lock the viewing monitor on the picture.

• INT : Internal Synchronization system.

SPECIAL

CAM TITLE OFF
LANGUAGE ENGLISH
MOTION ON

┛

PRIVACY ON

┛

SYNC INT
RETURN RET

┛

9. OSD MANUAL

23

8. RESET

: Enable user to reset all of the status as the factory default.

RESET

FACTORY RESET

┛

RETURN RET

┛