KT&C K9 Installation

K-9 Series

1.Date / Time Setup

2.Record Setup

Installation Guide

There are 4, 9 and 16 channel for this DVR
and rear panel images are different per channel.

SPLIT

5

4

678

123

VIDEO

IN

LOOP
OUT

IN

OUT

AUDIO

TX

CNOGS1 S2S3S4

RXG

AUDIO

123

4

OUT

<DVR Unit>

<Adaptor>

11

10

16

12 13

9

14

15

POWER ON

MONITOR

SPOT

POWER OFF

USB

LAN

DC12V

RS-232

VGA

HD MONITOR

E-SATA

<Power Cable>

<Batteries>

<USB Memory>

EMERGENCY

SCHEDULE

REC

<Remote Control>

<Screws>

Date / Time Setup

Go into System Setup -> Time/Date.

1

Set Time/Date accordingly.

2

* Note: The time can only be set as military time format.
(00:00:00~23:59:59)

Select ‘Apply’ option to save the change.

3

* Note: Message window will pop up warning you
it could cause a data loss.

Record Setting

Go into Record Setup -> Record Setting.

1

Select channel you want to set resolution, quality,

2

and frame rate. * Select ‘All’ to set all channels at once.

Post-Recording allows you to set record duration after

3

the event. (alarm, motion detection)

4

Audio can be used on channel 1~4.

Schedule Setup

Go into Record Setup -> Weekly Schedule.

1

Select channel.

2

Using mouse, you can select recording option to apply.

3

(N, C, M, S, M+S)

4

Apply selected recording option to time table.

* Note: You may apply multiple recording options to a single
channel by repeating step 3 & 4 on different block of the
‘time table’. (1 block represents 30 minutes)

5

Use ‘Channel to Copy’ to apply current channel setting to
another channel.

6

Use ‘All Ch to Copy’ to apply current channel setting to all
other channels.

The contents of this guide are subject to change without prior notice.

Ver. 960H_1.5

Memo

3. Network Setup

Network Setup

Go into Network Setup -> IP Address

1

Choose whether you will use DHCP or Static.

2

IP address Setup:

3

b. If using a Fixed IP (recommended), you will need to input
the information manually.
In order for remote connection to work, you must enter
valid data, compatible with your network, for all four of the
network setting fields: IP address, subnet mask, default
gateway and the DNS address (depending on your network
hardware and configuration this may be the IP address of
your router/gateway, or it may be the actual IP address of
the local DNS server).
The DNS server IP is required because your DNS server
provides critical information necessary for the DVR to
communicate with the remote user. You can obtain the
actual DNS IP from your Internet Service Provider (ISP)
or from a PC located on the same network as the DVR.

4

DO NOT change DDNS port information in order to use
KT&C’s dedicated DDNS server, www.ktncddns.net.

Router Setup

a. If you are connecting through a router, make sure that you
have ‘opened up’ all the required network ports (80, 9000)
in the port forwarding section of your router setup.
Useful information about port forwarding can be found at
www.portforward.com.

b. Port 80 is the default web port used for web viewer and port
9000 is default stream/command port for K9 Series DVR.
If you only plan to view your DVR on a LAN,
you don’t have to concern yourself with port forwarding.
This method can be convenient tool to check whether your
IP information is set properly. However, if you desire remote
access to your DVR as well as using DDNS option, you MUST
select functional ports and set up the port forwarding in your
router.

a. If using DHCP, all settings will be detected automatically.
While DHCP is a useful tool for determining the network
settings, if you set up your DVR in this manner its IP
address may change at different times for different
reasons, particularly after a power failure. If the IP
address of the DVR changes, you may have difficulties
accessing your DVR locally and/or remotely.
It is strongly recommended that you assign a fixed(static)
IP address to your DVR.

DDNS Setup

a. Go to www.ktncddns.net and register your DVR using
Webcode provided in the DVR’s System Setup menu.

b. Create a host name of your own to set up DDNS
connection. (Example: MyDVR.ktncddns.net)

* Note: The host name cannot include a space or
any special characters. (!@#$%^&*()<>,.)

4.Smart Phone

Mouse Control

Remote Control

Smartphone Access

Open the applicable app store from your smartphone.

1

(iPhone – Apple Store, Android – Play Store)

* Alternative: Download the app from below link into your
computer and install it to your smartphone.
▶Apple® iPhone®, iPod touch®, or iPad® : https://itunes.

apple.com/us/app/kvrmobile/id413597249?mt=8

▶Android™ phones : https://play.google.com/store/apps/

details?id=com.fnsys.mprms.co_ktnc&hl=en

Search for the app named ‘KVRmobile’

2

Download and install the app.

3

This app features :

▶ Live View and Search from 1 to 16 cameras

▶ Save screenshot into your SD card

▶ View images in portrait or landscape orientation
(single & multi-channel)

▶ Control PTZ

▶ Play audio in Live & Search

▶ Register multiple remote locations

▶ Control Relay

▶ 3G/4G/Wi-Fi compatible

Open the menu and
move to previous step

Select

Mouse right click on live screen brings the setup menu and also
the right click on search mode opens the control bar for playback.

Open the setup menu

1

Go to search mode

2

Go to backup mode

3

Listen or block audio

4

Switch to emergency recording

5

Switch to schedule recording

6

PTZ

Control a PTZ Camera

7

Start auto sequencing of the screen

8

Configure relay out

9

2

5

7

13

11

12

1 14

ID

1 2 3

4 5 6

7 8 9

4

SPLIT

SEARCH

0

SETUP

3

10

8

6

AUDIO

BACK UP

EMERGENCY

9

SEQ PTZ

SCHEDULE

10

REC

* Note: For more detailed information on how to register remote
site to the app, please refer to DVR User Manual.

5. Backup

Backup

Connect USB Memory Stick to either of USB ports on the DVR.

1

Select Backup from Main menu.

2

Select on backup start date/time on the time table and click

3

on Start to set the backup start time.

4

Select on backup end date/time on the time table and click
on End to set the backup end time.

5

Select channel(s) to archive.

Select whether you want to back up the log file with the video

7

data.

Set password for the backup data if needed.

8

Select archive data format, Executable Format or Video Format.

9

▶Executable Format: Data will be archived in self-executable
format which will be played with its own built-in player.

▶Video Format: Data will be archived in its own raw data format
which can be played with 'MS Backup Viewer’
which is included in software package.

Switch split screen on 9ch DVR

10

Zoom in the image on live or playback mode

11

Memo

13

1

ID : You can control multiple DVRs with one remote controller.
Push “ID” button and enter ID number set in the DVR.

2

Number : To select channel or to enter password.

3

SETUP : To open the setup menu.

SPLIT : To display split screen

4

5

△ : To move up

▽ : To move down

6

◁ : To move left

7

▷ : To move right

8

6

Click on Backup Start.

* Note: Make sure the backup size does not exceed the capacity
of the available USB memory space.

10

Click on Backup Start again.

9

EMERGENCY : To switch to emergency recording

10

SCHEDULE : : To switch to schedule recording

11

AUDIO : To listen audio or block the audio

12

SEQ : To start auto sequencing of the screen in full screen mode

13

PTZ : To switch to PTZ mode

SEARCH : To open the search menu

14