KT&C K7-E1600-1TB, K7-e800-3TB User Manual
K7 SERIES
USER’S MANUAL
Analog DVR
K7-e400
K7-e800
K7-e1600
For safe use of system and to prevent product failure or accident, please read this manual
carefully before use.
K7 Series DVR Manual
Before Use
This product has been designed and manufactured to assure personal safety. Improper use can
result in electronic shock or fire hazard. The safeguards incorporated in this product will protect
you if you observe the following procedures for installation, use, and servicing.
This product does not contain any parts that can be repaired by user.
[Note]
Some contents of this manual are subject to change for function improvement.
DIGITAL VIDEO RECODER MANUAL
2
Caution
K7 Series DVR Manual
Warning
Check if the power is switched off before
installation. Don’t plug in at the same time.
Otherwise it may be set on fire or put you at
the risk of electrocution or damage.
Keep the cables at least 15 centimeters away
from the wall and at least five centimeters away
from the side so that the cables, including
power line and video cable, may not be
disfigured. Otherwise it might put you at the
Check if the power is switched off before
installation or additional repair. Never plug in
while the device is in operation. Otherwise it
might be set on fire or put you at the risk of
fire, electrocution and damage.
Never uplift the cover, break down, repair and
maintain at your disposal. Otherwise it might
put you at the risk of fire, electrocution and
damage.
risk of fire, electrocution and damage.
Keep the device environment always clean
before and after installation of the device. Use
dry cloth to clean the device. Never use any
organic solvent. Otherwise it might be the
cause of electrocution or mechanic disorder.
Input voltage of the device should come within
the range of 10 percent of specified voltage.
Use separate wall power to keep heating
appliances, including hair dryer, iron and
refrigerator. Otherwise it might be the cause of
fire and electrocution.
3
DIGITAL VIDEO RECODER MANUAL
K7 Series DVR Manual
When strange noise or smell is sensed,
immediately plug out and send inquiry to
service center or seller.
Caution
Do not install the device in any place where
strong magnetic flow, electric wavelength and
vibration may be sensed or where radio, TV or
other wireless device is located. Keep the
device away from magnetic flow, electric wave
or vibration.
Do not install device in humid place filled with
dust. It might be the cause of electrocution and
fire.
Do not put anything heavy on the product.
Otherwise it may be the cause of disorder.
Strong shockwave or vibration may be the
cause of mechanic disorder. Please be careful.
Check if power switch and record on the front
side of the product is still turned on.
Be careful so that anything conductive may not
fall into the ventilation hole. Otherwise it may
be the cause of disorder.
When HDD is overloaded, you change the
setting to keep recording. In that case, check
again if it would be OK to eliminate the saved
data.
DIGITAL VIDEO RECODER MANUAL
4
K7 Series DVR Manual
When HDD saving data gets old enough, video
data to be saved may suffer so much damage
that it may be irreparable. If screen appears
broken while regenerating data saved in HDD,
it means HDD won’t work any longer.
Immediately contact service center to replace
them.
Caution : Any changes or modifications in construction of this device which are not expressly
Approved by the party responsible for compliance could void the user’s authority to
When any abnormal sign is detected,
Immediately contact seller or service center.
operate the equipment.
Note : This Equipment has been tested and found to comply with the limits for a Class A digital A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at
his own expense.
Warning :
This is a class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
DIGITAL VIDEO RECODER MANUAL
5
Check Components
K7 Series DVR Manual
DVR
Power Adaptor
Component Description
Battery
Screw
Mouse
Power Cable
Software CD
Remote
Controller
DVR Stand Alone Digital Video Recorder
Battery 1.5V (AAA) 2 PCS.
Screws For HDD mounting x 4, rack mounting x 8
Software CD CD with manual, Client software
Power Adapter DC 12V 3.5A (4,8CH) / DC 12V 5A (16CH)
Power Cord Power cable
Remote Controller For DVR operation
Mouse For DVR operation
Rack Mount Brackets Rack mount brackets 2 PCS (For 16CH only)
DIGITAL VIDEO RECODER MANUAL
6
K7 Series DVR Manual
- Contents –
Chapter 1. Features & Components
1-1 Features……………………………………………………………………………………………..……………………………………….9
1-2 Name and function of front panel……………………………………………………..……………………………………….10
1-3 Rear panel…..…………………………………………………………………………..…………………………………….11
Chapter 2. Basic Information
2-1 Menu Display…………………………………………………………..…………………………………………..…………….…….16
2-2 Description of Icon…………………………………………………………………………………………………………..…..…..…16
2-3 Remote Controller……….……………………………………………………………………………………….…………………..…..18
2-4 How to set remote controller ID………………………………………………………………………………………..….…..20
2-5 How to display menu………………………………………………………………………………………………………………… 21
Chapter 3. System Configuration
3-1 Information……………………………………………………………………………………………………………………..……..…….22
3-2 Time/Date……….……….…………………………………………….………………………………………………………………..……23
3-3 Password……………..………………………………………………………………………………………………………………..…….25
3-4 Hard Disk………………….………………………………………………………………………………………………..……..…….25
3-5 Default Setup………..…………………………………………………………………………………………………..…….…….27
3-6 Upgrade……………………………………………………..……………………………………………………………….………....27
3-7 Button Setup………..………………………………………..…………………………………………………………….….….……28
3-8 RS-485………………………………….………………………………………………………………………………………….….….…….28
Chapter 4. Display
4-1 OSD………………………………..……………………………………......................................................................................….29
4-2 Split Mode…………………..……………………………………......................................................................................….29
4-3 Auto Sequence…….………………..………………………..………………………………………………………..…..…………….32
4-4 TV Adjustment ………..………………………………………..……………………………………………………..………..…..……33
Chapter 5. Network Setup
5-1 IP Address……………………..……………………………………………………………………………………….………………….34
5-2 Notification..………………..……………………………………………………………………………………….………………….35
DIGITAL VIDEO RECODER MANUAL
7
K7 Series DVR Manual
5-3 Email Notification…………..……………………………………………………………………………………….………………….36
5-4 Web Server…..…………………..……………………………………………………………………………………….………………….36
5-5 Free DDNS...…………………..…………………………………….………………………………………………….………………….37
5-6 Dual Codec Setup……………..…………………………………………………………………………………….………………….37
Chapter 6. Camera
6-1 Camera Setting……………...…………………………………………………………………………………………..…………..…38
6-2 Camera Title……………...…………………………………………………………………………………………..…………..…38
6-3 PTZ Setting………………………………………………………...………………………………………………………………...……39
6-4 How to use PTZ……….…………………………………………..………………………………………………………………...……40
Chapter 7. Record
7-1 Record Setting….……………………..………………………….……………………………………………………………….……….42
7-2 Weekly Record……………………..………………………………………………………………………………….……….……….43
Chapter 8. Event Setup
8-1 Sensor…………………..…………………………………………………………………….…………………………………….…………45
8-2 Motion Detection………………..……………………………………………………………………………………..…..……..……45
8-3 Camera Tamper Detection………………………….…………………………………………………………………..…….……..46
8-4 Event Action……..…………………………………………………………………………………………………………..…….……..46
Chapter 9. Search
9-1 Search Menu….………..…………………………………………………….……………………………………………….…..……48
9-2 Calendar Search………………………..…………………………………..……………………………………………………………49
9-3 Date/Time Search……………………..…………………………………..……………………………………………………………50
9-4 Event Search…..………………………..………………………………………..………………………………………………….……51
9-5 Go to first/ Go to last………..………………………………………………..…………………………………………………..…51
9-6 Search Control…………………………..……….………………………………..…………………………………………………......52
9-7 Audio..…………………………..……….……………………………………………………………………………………......52
Chapter 10. Backup
10-1 Backup……………………………………..……………………………………..………………………………………….………………53
Chapter 11.Remote Connection – iPhone………………………………………………………………………………………….58
Chapter 12.Remote Connection – Android Phone…………………………………………………………………………….66
Chapter 13.Specification...…………………………………………………………………………………….…………….........………..77
DIGITAL VIDEO RECODER MANUAL
8
K7 Series DVR Manual
▒ Chapter 1. Features & components ▒
1-1. Features
This Standalone Digital Video Recorder is capable of high quality of video and audio data
recording and provides various ways of data search by Calendar, Date/Time and event. Also the
system allows remote user to access in order to monitor and control multiple local DVRs via
TCP/IP & LAN connection.
Main feature
ㆍAble to control the PTZ by using mouse like joystick
ㆍFront USB port for easy backup
ㆍSupport Megabit Ethernet.
ㆍAble to access internet with dynamic IP address
ㆍSupport Dual-Stream network transmission.
ㆍTV out, VGA out
ㆍAble to set the resolution, frame and quality per channel.
ㆍSupport a number of PTZ protocol
ㆍSupport Central Monitoring Software (CMS).
Application
√ Banks, ATM machine, supermarket, convenience store and other places
√ Private homes, apartment buildings, jewelry store, commercial buildings
√ places requiring safety for children such as school, elementary school and playground
√ warehouse, storage house and workplace
√ Places requiring remote surveillance
DIGITAL VIDEO RECODER MANUAL
9
K7 Series DVR Manual
1-2. Name and Function of Front Panel
(4Ch / 8CH DVR)
[1] POWER LED
[2] RECORD LED
[3] USB Port
[4] MENU Button
[5] QUAD Button
[6] REC Button (Emergency / Schedule)
Rear panel
(16CH DVR)
DIGITAL VIDEO RECODER MANUAL
10
K7 Series DVR Manual
(4Ch DVR)
[1] AUDIO OUTPUT
[2] AUDIO INPUT
(8Ch DVR)
(16Ch DVR)
DIGITAL VIDEO RECODER MANUAL
11
K7 Series DVR Manual
[3] VIDEO INPUT
[4] VIDEO OUTPUT (COMPOSITE)
[5] VGA OUTPUT
[6] ETHERNET PORT (RJ-45)
[7] USB PORT (USB Memory / Mouse)
[8] RS-485/ALARM/SENSOR
[9] POWER (ADAPTER)
▒ Chapter 2. Basic Information ▒
2-1. Menu Display
It’s available to call setup menu with menu button on front panel, a mouse or the remote
controller.
☞ Display Setup Menu with a remote controller.
Press Menu button on a remote.
☞ Display Setup Menu with a mouse
Right click to display pop-up menu. Select ‘System’ to go into Setup
2-2. Description of Icon
[1] The icons on the live screen indicate the status.
12
DIGITAL VIDEO RECODER MANUAL
K7 Series DVR Manual
Recording
Motion Detection
Sensor
[2] Camera title will be shown as below.
DIGITAL VIDEO RECODER MANUAL
13
K7 Series DVR Manual
[3] Status Bar
1. Display date and time
2. ER means Emergency Recording and SR means Scheduled Recording.
3. Show network status and key lock status.
4. Show HDD status starting at 100% with no data written on the disk and display “Overwrite”
when overwrite function is enabled.
2-3. Remote Controller
It is available to use all functions on the DVR with a remote. Controlling several DVRs with one
remote is also available.
14
DIGITAL VIDEO RECODER MANUAL
K7 Series DVR Manual
[1] ID : Select to configure a remote controller ID in case of using one remote to control multiple
DVRs.
[2] SPLIT : Select to display various split modes. Keep pressing the same button will toggle
between different split modes.
[3] BACK UP : Select to start archiving stored data to external media.
[4] AUDIO : Select an audio channel.
[5] SEQ : Select to display each camera in sequence.
[6] PTZ : Select to bring up PTZ control menu.
[7] SEARCH : Select to playback recorded data.
[8] NUMBER BUTTON : To select single channel or to input the number in setup menu.
[9] SET UP : Select to display setup menu.
DIGITAL VIDEO RECODER MANUAL
15
K7 Series DVR Manual
[10] DIRECTION KEY / CONFIRM BUTTON / PLAYBACK CONTROL – To move up/down/left/right on
the OSD menu, playback control
[11] Record Button – toggle between Emergency Recording and Schedule Recording
• EMERGENCY : Emergency Recording Button
• SCHEDULE : Schedule Recording Button
2-4. How to set remote controller ID
In order to use remote controller, the ID must be the same on both DVR and remote controller.
By assigning DVR ID differently, the user can control multiple DVRs with one remote controller.
[1] Check current system ID and set desired ID. (Default ID is “0”)
Menu > System > Information > Remonte ID (Range : 0 ~ 99)
* System ID must be configured on DVR system menu. It cannot be changed through remote
controller or remote client.
[2] How to use remote controller
ID must be unified between remote controller and system. Otherwise remote controller won’t
work.
DIGITAL VIDEO RECODER MANUAL
16
K7 Series DVR Manual
Remote controller ID menu displays as above image when you press ID button of remote
controller.
• DVR ID : It displays current ID of the system.
• “0” : Input the same ID number of DVR and press “Confirm”
2-5. How to display menu
It is available to display menu with front panel buttons, remote and mouse.
[1] Front panel button : Push “MENU” button on the front panel.
[2] Mouse : Right-click
[3] Remote : Push “MENU“ button
Go to main setup menu
Go to search menu
Go to backup menu
Go to audio output menu
Start emergency recording
Start schedule recording
Go to PTZ Control menu
Start sequence
Switch output to Alarm or internal buzzer
Change display split mode
DIGITAL VIDEO RECODER MANUAL
17
K7 Series DVR Manual
▒ Chapter 3. System Configuration ▒
3-1. Information
[1] Remote ID : Assign the ID of remote controller so that user can control multiple DVRs with
one controller. (ID range : 0 ~ 99)
[2] Language : Select a language.
[3] Version : Display Software, Hardware and Network version information
[4] Health : Indicates storage status.
• Hard Disk 1~2 : Display the temperature of hard disk
• Front USB : Display the temperature of external storage on front USB port.
• Rear USB : Display the temperature of external storage on rear USB port.
[5] Video Detect Mode : Select a video signal format. (NTSC / PAL)
[6] Video Mode : Display video signal format
[7] WEB Code : DDNS ID for DDNS connection.
[8] MAC Address
DIGITAL VIDEO RECODER MANUAL
18
3-2. Time/Date
K7 Series DVR Manual
[1] Time : Set time
[2] Date : Set date
[3] Date format : Select a Time/Date display format.
[4] Daylight Saving Time : Set “ON” to apply daylight saving time.
Enter Month/Week/Day to begin and also enter Month/Week/Day to end.
[5] Time Server : Set time automatically through internet.
19
DIGITAL VIDEO RECODER MANUAL
K7 Series DVR Manual
• Time server : Input the URL of server (Default : us.pool.ntp.org)
• Synchronize Period : Select the period to syncronize between DVR and time server
• Power On : Try to sync once power on.
• 12Hour : Try to sync every 12 hours.
• 24Hour : Try to sync every 24 hours.
• Time Zone : Select Standard time
[6] Apply : Save and apply time / date setting.
3-3. Password
[1] ID : Available to register max 8 account (“Admin” and “User1~7)
• admin : Administrator ID
• User1~7 : User ID
[Note] Default password of all ID is “11111111”
[2] Assign an authority per selected ID
• Configuration : Permission to set configuration
20
DIGITAL VIDEO RECODER MANUAL
K7 Series DVR Manual
• Hard Disk : Permission to set Hard Disk
• Search : Permission to search
• Backup : Permission to back up
• PTZ Setting : Permission to control PTZ
• PTZ OSD Menu : Permission to access PTZ OSD menu
• Record Key : Permission to use Emergency Recording Key
• Camera : Permission to see the selected channel
[3] Detailed setting on each channel
• V – Show both video and OSD
• NC - Show video but hide OSD
• C - Hide video but show OSD
• B - Hide both video and OSD
3-4. Hard Disk
As it is related to recording, if any setting is wrong, system error or abnormal recording could
happen.
[1] Hard Disk List : It provides the information for hard disk, external hard disk and formatting
option.
21
DIGITAL VIDEO RECODER MANUAL
K7 Series DVR Manual
• Hard Disk1 : Display the hard disk capacity internally mounted
• Front USB : Display the capacity of front USB device
• Rear USB : Display the capacity of rear USB device
• Erase Data : Select a disk and format(delete) it
[2] Total : Display total capacity and used capacity of Hard Disk
[3] Over write : Record continuously by overwriting the hard disk
[4] Erase Data : Format hard disks by type
• Main Disk : Format all the mounted disks named “Main disk”
• Mirror Disk : Format all the mounted disks named “Mirror Disk’
[5] Auto Delete : Keep the recorded data for the selected period and automatically delete the
previous data.
[6] Advanced : Select whether a Hard Disk is used as Main disk or Mirror disk.
• Hard Disk1 : Internal Hard Disk Drive
• Front USB : Front USB device
• Rear USB : Rear USB device
• Apply : Save the setting
[Note] After setting, select “Apply” to save. Then, the system will reboot.
3-5. Default Setup
DIGITAL VIDEO RECODER MANUAL
22
K7 Series DVR Manual
[1] Default Setup : Except major configuration (Network, Password), parameters are initialized.
[2] Factory Setup : All parameters are initialized.
3-6. Upgrade
[1] Firmware Update : In order to update system firmware with USB memory stick, the firmware
file must be saved in the USB’s root folder and then insert to DVR to start the update from the
menu.
Save a firmware
USB Memory Stick
[Note]
Do not turn off power or remove USB stick while the upgrade is in progress.
[2] Save Configuration : Save a configuration file of DVR.
[3] Load Configuration : Load a configuration file to DVR.
3-7. Button Setup
DIGITAL VIDEO RECODER MANUAL
23
Loading...