KT&C ACE-M321 Operation Manual

M112-M321-002

Ultra-High Resolution

COLOR MODULE CAMERA

OPERATION MANUAL

Thank you for choosing our high quality camera.
Before attempting to connect operate this unit, please
read and follow these instructions.

Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European
countries with separate collection systems)

This marking shown on the product or its literature, indicate that
it should not be disposed with other household wastes at the end
of its working life. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, please separate
this from other types of wastes and recycle it responsibly to promote
the sustainable reuse of material resources.

This product should not be mixed with other commercial wastes

purchased this product, or their local government ofce, for details

of where and how they can take item for environmentally safe
recycling.

Business users should contact their supplier and check the terms
and conditions of the purchase contract.
Household users should contact either the retailer where they for
disposal.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER(OR BACK). NO USER.
SERVICING TO QUALIFED SERVICE PERSONNEL.

This symbol is intended to alert the user to the presence
of uninsulated "dangerous voltage" within the product's

enclosure that may be of sufcient mangnitude to constitute

a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of
important operating and maintenance(servicing) instruction in
the literature accompanying the appliance.

FEATURES

• 1/3” SONY EXview HAD CCD II

• High Resolution of 700TV Lines

• OSD (5-Port KEY)

• Multi Language

(ENGLISH / JAPANESE / GERMAN / FRENCH /
RUSSIAN / PORTUGUESE / SPANISH / CHINESE)

• 2DNR

• Privacy Zone 4Zones

• Motion Detection 4Zones

• DC IRIS Control (Option)

• Only DC12V

• ATR

(Adaptive Tone-curve Reproduction / Digital WDR)

The function provides gradation compensation to improve
the contrast of subjects both low-luminance areas and high
luminance areas exist in the same picture

• IR Optimizer

If,when the night operation mode of the DAY/NIGHT function
is established, the mode is used together with an external
infrared LED light source, excessive front lighting may occur,
resulting in overexposure.
The IR Optimizer function makes it possible to minimize this
overexposure by optimizing the exposure
control during Night operations.

DIMENSIONS

Unit(mm)

CAUTIONS

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions;

1. This device may not cause harmful interference.

2. This device must accept any interference received, including
interference that may cause undesired operation.

Note -

This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own
expense.”

WARNING -

This is a class A product. In a domestic environment this product
may cause radio interference in which case the user may be
required to take adequate measures.

Caution -

Any changes or modications in construction of this devies which

are not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.

CAUTION

1. A regulated DC12V 300mA power supply is recommended for use with
this camera for the best picture and the most stable operation.

An unregulated power supply can cause damage to the camera.
When unregulated power supply is applied, product warranty will be
out of subject.

2. It is recommended that the camera is used with a monitor that has a
CCTV quality 75 video impedance level. If your monitor is switched to high
impedance then please adjust accordingly.

3. Do not attempt to disassemble the camera to gain access to the internal
componets. Refer servicing to your dealer.

4. Never face the camera towards the sun or any bright or reective light,

which may cause smear on the picture and possible damage to the CCD.

5. Do not remove the serial sticker for the warranty service.

- BOARD LENS -

- PIN HOLE LENS -

- VARIFOCAL LENS -

CAUTIONS

Signal Format NTSC PAL
Image Device 1/3” 960H SONY EXview HAD CCD II
Scanning

System

2 : 1 Interlace

H.Resolution 750TV Lines
Scanning

Frequency

15.734KHz(H),

59.94Hz(V)

15.625KHz(H),
50Hz(V)

Total Pixels

1020(H) X 508(V) 1020(H) X 596(V)
Effective Pixels 976(H) X 494(V) 976(H) X 582(V)
Electronic

Shutter Speed

1/60~1/100,000sec 1/50~1/100,000sec

S/N Ratio More than 50dB(AGC OFF)
Gamma r =0.45
Min.

Illumination

0.1Lux / F2.0
Sync System Internal
Video Output 1.0 Vp-p Composite 75(Ω) unbalanced
OSD Built in

BLC OFF / BLC / HLC
White

Balance

ATW / PUSH / USER1 / USER2 / ANTI CR /

MANUAL / PUSH-LOCK

2DNR OFF / ON(Level adjustable)

ATR OFF / ON(Level adjustable)
IR Optimizer OFF / ON(Level adjustable)

Function

MIRROR / BRIGHTNESS / CONTRAST /

SHARPNESS/HUE / GAIN

Privacy
Masking

4 Zones

Motion
Detection

4 Zones
Day & Night AUTO / COLOR / BW / EXT1 / EXT2
Lens

Vari-focal, Board,

Pinhole, C/CS Mount (DC-IRIS only)

Language

ENGLISH / JAPANESE / GERMAN /

FRENCH / RUSSIAN /

PORTUGUESE / SPANISH / CHINESE

Input Power
Source

DC 12V ±10% Max 100mA

Operating
Temperature

14°F~122°F (-10°C~+50°C)

Storage
Temperature

-4°F~140°F (-20°C~+60°C)

Operating
Humidity

Less than 80%

Dimension 32mmX32mm

Specications and designs are subject to change for improving

the functionality of this product without notice.

SPECIFICATION

< TOP VIEW >

17.21.2

9.716.2 1.21.2

32

32

28

28

CONNECTION

1) J102(DN_EXT)

PIN NO. NAME I/O

1 +12V O
2 GND ­3 Day&Night SIGNAL I

2) J103(MAIN)

PIN NO. NAME I/O

1 Not used ­2 K_DOWN I
3 K_UP I
4 K_ENTER I
5 K_RIGHT I
6 K_LEFT I
7 GND ­8 VIDEO O
9 GND -

10 +12V I

3) J104(DC IRIS)

PIN NO. NAME I/O

1 DAMP + O
2 DAMP - O
3 DRV + O
4 GND -

J103

1 103 1

1 4

J102

J104

OSD MENU STRUCTURE

MAIN MENU 1st Sub MENU 2nd Sub MENU 3rd Sub MENU 4th Sub MENU

LENS

MANUAL

AUTO

TYPE DC
MODE AUTO,OPEN,CLOSE
SPEED (000 ~ 255)
RETURN

SHUTTER/AGC

AUTO

HIGH
LUMINANCE

MODE

SHUT,AUTO IRIS,
SHUT+AUTO IRIS

BRIGHTNESS (000 ~ 255)

LOW
LUMINANCE

MODE AGC,OFF
BRIGHTNESS x0.25,x0.50,x0.75,x1.00

RETURN

MANUAL

MODE SHUT+AGC

SHUTTER

1/50(PAL),1/100(NTSC)
1/60(NTSC),1/120(PAL)
1/250,1/500,1/1000

1/2000,1/4000,1/10000
AGC 6,12,18,24,30,36,42,44.8
RETURN

WHITE BAL

ATW

SPEED (000 ~ 255)
DELAY CNT (000 ~ 255)
ATW FRAME x0.50,x1.00,x1.50,x2.00
ENVIRONMENT INDOOR,OUTDOOR
RETURN

PUSH

USER1

B-GAIN (000 ~ 255)
R-GAIN (000 ~ 255)
RETURN

USER2

B-GAIN (000 ~ 255)
R-GAIN (000 ~ 255)
RETURN

ANTI CR

MANUAL

LEVEL

NTSC:(30 ~ 115)

PAL:(28 ~ 134)
RETURN

PUSH LOCK

BACK LIGHT OFF,BLC,HLC

PIC ADJUST

MIRROR OFF,ON
BRIGHTNESS (000 ~ 255)
CONTRAST (000 ~ 255)
SHARPNESS (000 ~ 255)
HUE (000 ~ 255)
GAIN (000 ~ 255)
RETURN

ATR

ON

LUMINANCE LOW,MID,HIGH
CONTRAST

LOW,MIDLOW,MID,

MIDHIGH,HIGH
RETURN

OFF

MOTION DET

ON

DETECT SENS (000 ~ 127)
BLOCK DISP

OFF,ON,ENABLE

(CONTROLER)
MONITOR AREA ON,OFF

AREA SEL

1/4, 2/4, 3/4, 4/4

TOP

NTSC:(000 ~ 244)
PAL:(000 ~ 288)

BOTTOM

NTSC:(000 ~ 244)
PAL:(000 ~ 288)

LEFT

NTSC:(000 ~ 474)
PAL:(000 ~ 468)

RIGHT

NTSC:(000 ~ 474)
PAL:(000 ~ 468)

RETURN

OFF
NEXT
EXIT
SAVE ALL

*SHUT+IRIS:

Both the Shutter and the Mechanical Iris are automatically adjusted according to brightness.

*Auto Iirs(Default):

The Shutter stays at the manually selected value and only the Mechanical Iris adjusts brightness.

MAIN MENU 1st Sub MENU 2nd Sub MENU 3rd Sub MENU 4th Sub MENU

PRIVACY

ON

AREA SEL

1/4, 2/4, 3/4, 4/4
TOP

NTSC:(000 ~ 244)
PAL:(000 ~ 288)

BOTTOM

NTSC:(000 ~ 244)
PAL:(000 ~ 288)

LEFT

NTSC:(000 ~ 474)
PAL:(000 ~ 468)

RIGHT

NTSC:(000 ~ 474)

PAL:(000 ~ 468)
COLOR (1 ~ 8)
TRANSP 0.00, 0.50, 0.75, 1.00
MOSAIC OFF,ON
RETURN

OFF

DAY/NIGHT

AUTO

BURST OFF,ON
DELAY CNT 0 ~ 255
DAY -> NIGHT 0 ~ 255
NIGHT -> DAY 0 ~ 255
RETURN

COLOR

BW

BURST OFF,ON
IR OPTMIZER OFF,ON
MODE AUTO, CENTER
LEVEL 0 ~ 31
RETURN

EXT1
EXT2

NR

NR MODE OFF,Y,C,Y/C
Y LEVEL (000 ~ 015)
C LEVEL (000 ~ 015)
RETURN

CAMERA ID

ON

EDIT MODE
RETURN

OFF

LANGUAGE ENGLISH /

日本語

/ DEUTSCH / FRANCAIS /

Русский

/ PORTUGUÊS / ESPAÑOL /

中文

CAMERA
RESET
BACK
EXIT
SAVE ALL

*Important Note :

- Any changes made to the camera settings must be saved prior to exiting the OSD menu.
Else all changes will be discarded.

- By changing the lens option in the OSD from MANUAL to AUTO will automatically change the
SHUTTER/AGC setting from AUTO IRIS to SHUT+AUTO IRIS.(Default:AUTO IRIS)