KS Kingston Light User Manual

COnnECTiv iTy
KINGSTON LIGHT
PORTABLE SOUND SYSTEM
USER MANUAL
Your produc t and bat teries must be re cycled o r dispo sed of pro perly. Ple ase con tact you r local
All trad emarks are ack nowledged as th e prope rty of their res pecti ve owner s. Unless other wise stated the ir use
does not imply th at the trad emark owner is a liated w ith Kit Sound or endor ses the pr oducts h erein.
JB. 4240 / Made in Chi na. © KitS ound™ 2015. Chris tchurch, D orset, BH 23 4FL, UK
recycl ing centre for mor e inform ation on p roper disposa l.
We are craftspeople. We are musicians. We are KitSound
And we all commit ourselves to achieving one shared goal:
Bringing people closer to their music. By truly understanding
music we stay true to its craft. Pure, rich, incredible sound.
We’ll settle for nothing less.
At KS we believe your music deserves to be showcased on great quality products that don’t cost the earth. We might not all share the same taste in music (the ferocious disputes on music forums
prove that), but whether it’s Irish folk, death metal or any number of obscure genres which seem to be multiplying by the minute, the artists responsible for connecting with you through their craft have
bared their souls to do so. And we think that’s worth celebrating.
Please read this manual carefully before use.
Box contents
KS Kingston Light portable sound system
2 x power cable ( UK and EU )
3.5 mm aux-in cable
User manual
Functions
1. ¼" microphone jack
2. Microphone volume control
3. Aux-in por t
4. Disconnect button
5. Master volume
6. Battery level LED indicator
7. USB charge input
8. ‘On’ LED indicator
9. FM ON/OFF switch
10. FM radio screen
11. Volume down/previous
12. Sear ch
13. Volume up/next
14. M ute
15. Charge light
16. ON/OFF switch
17. Power cable input
18. AC adaptor fuse
19. Bluetooth LED indicator
20. Stand base
19 9
BT-LED
AUX-IN
1 2 3 4 5 7 8 11 1312 146
1615
17
18
AC 240 V 50/60 Hz
5 V DC @ 1.2 A
VOL –
Instructions for use
Charging the speaker
It is recommended that you give the speaker a full charge before its rst use.
1. Plug the power cable into the power cable input (17)
2. Insert the plug into a mains socket
3. The Charge light (15) will be solid green whilst charging
4. When charging is complete, the green light will go out
Note: It may take up to 4 hours before the speaker is fully charged. Please allow up to 6 hours for the rst charge.
10
Battery Level
The battery LED indicator (6) will inform you of how much battery you have lef t whilst not on charge
The battery level will dier depending on how loudly you are playing this speaker
Getting started
1. To turn the speaker on press the On/O switch (16) to On
2. To turn the speaker o press the On/O switch (16) to O
3. Whilst the speaker is turned on, the ‘On’ LED indicator (8) will be solid blue
Pairing the speaker to your device
Before you can use the speaker via Bluetooth, it will need to be paired to your device. To do this:
1. Turn your device and the speaker on
2. The speaker will automatically enter pairing mode, and the Bluetooth indicator light will be ashing blue quickly
20
3. Turn your device’s Bluetooth ON and search for new devices
4. When the ‘KS Kingston Light’ appears in the list, select it and if asked for a passcode, enter ‘0000’
5. The speaker should then be paired to your device. Once paired the Bluetooth LED (19) will be a solid blue
Note: To re-activate pairing mode, either turn the speaker o then on again, or press the Disconnect button (4) and the light will start ashing again.
To pair additional devices to the speaker, rst make sure the Bluetooth on any devices that have already been paired to the speaker is turned o
Then follow the above instructions from step 1
6 7
Playing music on your speaker
Bluetooth setup
When connected to the speaker via Bluetooth, simply nd and play the music on your device and the sound will play through the speaker. Some devices may require
you to select the audio output. You should be able to do this by going to the ‘Listen via’ or ‘Play via’ menu. If unsure, please refer to your device’s manual.
To change track please use your device. To control the volume either use your device or;
Turn the Master volume (5) clockwise to increase the volume
Turn the Master volume (5) anti-clockwise to decrease the volume
Auxiliary
Using the provided cable, you can connect your device directly to the speaker. To use this, simply plug the cable into the speaker’s aux-in port (3) and your device, and
then press play on your device. You will need to use your device to change track, and you can change volume either on your device, or as above.
FM radio
To use FM radio please do the following:
1. Turn the device on
2. Slide the FM On/O button (9) to on
3. The FM radio screen (10) will now turn on
4. Ex tend the aerial
5. Click Search (12) and the Kingston Light will automatically scan all available channels
6. To change station short press Volume down/previous (11) or Volume up/next (13) until you nd your desired station
7. Click Mute (14) to mute the radio
8. To increase volume long press Volume up/next (13)
9. To decrease volume long press Volume down/previous (11)
10. To increase volume further turn the Master volume (5) clockwise
11. To decrease volume further turn the Master volume (5) anti-clockwise
Note: You can play music via Bluetooth, auxiliary and radio at the same time, per fect if you want to mix your music.
Microphone
To use a microphone please do the following:
1. Insert the microphone jack into the ¼" microphone jack (1)
2. Turn the Microphone volume control (2) clockwise to increase the volume
3. Turn the Microphone volume control (2) anti-clockwise to decrease the volume
USB charging
To charge your device through USB, turn the device on and insert the USB into the USB input (7)
– Insert other side of cable into your device and it will automatically charge
Using speaker stands
– If you want to use speaker stands with the Kingston Light, please make sure the pole diameter is
35 mm Simply insert the speaker stand pole into the Kingston Light’s stand base (20)
Care for your Kingston Light
Please DON’T:
Get the Kingston Light wet
Drop the Kingston Light as this will invalidate your warranty
Open up the Kingston Light. There are no user ser viceable par ts inside
Expose the Kingston Light to extreme temperatures or rapid changes of hot to cold or vice versa
Please DO:
Clean the Kingston Light with a soft dry cloth and no detergents
35 mm speaker s tands
(not included)
Please note: Your device will have an internal amplier and if it is playing digital les like MP3s it will also have an integrated DAC (Digital Audio Converter). If you turn
the volume up to 100%, your device will be sending a distorted signal. To avoid this, and to get the best quality from the speaker, we recommend that you do not run
your device any higher than 95% volume. Some devices output higher than others, so you may need to reduce the volume if you experience distortion.
8 9
[contin ued...]
Specications
IMPORTANT SAFETY INSTRUCTIONS
S/N 80 dB
Bluetooth V3 A2DP, AVRCP
Bluetooth range up to 10 m
Battery voltage DC 12 V
Battery Capacity 5 Amp-Hours
Frequency response 55 Hz – 20 kHz
Drivers 8"
Output RMS 25 W
Play time up to 5 hours @ 50% volume
Charging time up to 4 hours
Unit size H505 x W370 x D280 (mm) including wheels and handle
Troubleshooting
We hope you’ve now got all the information you need to get started, but if you’re having problems with anything, please feel free to contact us at: support@kitsound.co.uk
The use and operation of this speaker is beyond our control. Warranty of the Kingston Light is limited to defects caused by faulty manufacture or defects in materials
only. No warranty whatsoever is given or implied for damage caused by the user under any circumstances.
This does not aect your statutory rights.
Please do not attempt to open this product. There are no user ser viceable par ts inside, in particular if your product has an embedded, non-replaceable battery.
Warrant y
Making any attempt to open the product or carry out repair voids any and all warranties.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL.
1. Read these instructions
2. Keep these instructions
3. Heed all warnings
4. Follow all instructions
5. Do not use this apparatus near water
6. Clean only with a dry cloth
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including ampliers) that produce heat
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. T he wide blade or the third prong are provided
for your safety. If the provided plug does not t into your outlet, consult an electrician
for replacement of the obsolete outlet
The lightning ash with arrowhead symbol inside an equilateral triangle is intended to aler t the user of the presence of uninsulated “hazardous voltage” within the product’s enclosure, which may be of sucient
magnitude to induce a risk of electric shock to persons.
The exclamation mark inside an equilateral triangle is inte nded to alert the user of the presence of impor tant operating and maintenance (servicing) instructions in the literature accompanying the product.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience rec eptacles, and the point where they exit from the apparatus
11. Only use attachments/accessories specied by the manufacturer
12. Use only with the car t, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When a car t is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over
13. Unplug this apparatus during lightning stor ms or when unused for long periods of time
14. Refer all servicing to qualied service personnel. Ser vicing is required when the apparatus has be en damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally or it has
been dropped
15. The apparatus should not be exposed to dripping or splashing and no objects lled with liquids, such as vases, should be placed on the apparatus
16. The batter y should not be exposed to excessive heat such as sunshine, re or similar
17. The mains plug is used as the disconnect device, which should remain readily operable
18. Do not attempt to access or remove the battery as this may cause personal injur y
and will damage the product
We apologise for any inconve nienc e cause d by minor inconsis tencie s in these i nstruc tions, which may oc cur as a resu lt of produ ct improvement and develo pment.
10 11
Loading...