Krups COFFEE TIME PLUS 12-CUP, COFFEE TIME PLUS 10-CUP, 137 User Manual

"
~~QJJ~
Instruction BooklWarranty/KRUPS Guarantee of Performance
Coffee Time Plus 12-cup, MODEL=#=137 Coffee Time Plus 10-cup, MODEL=#=136
4
-
'"
/
y:
-
~
0
b
d
f
e
.........
h k
m
a - Hinged water container lid
b - Swivel filter c - Removable filter holder d - Outside water level indicator e - Glass carafe
f - Lidfor glass carafe g - ON/OFF membrane switch
with signal light
h - Warming plate i-Cord storage j - Fullflavor selector (1- 3)
membrane switch with signal light
min.
h
k - "Auto" membrane (Used for
"Wake-Up" coffee) with signal light
I - LEDclock/timershows
time of day (AM/PM)& programmed "Wake-Up"
time on demand
m - Program membrane switch
(used for "Wake-Up" coffee)
with signal light
n - "h" (hour) membrane switch
sets the proper hour
0 - "min" (minute) sets the
precise time of day
,-acI1'..c.'
9
0
n
SPECIAL CORD SET INSTRUCTIONS
Regarding your Cord Set:
A. A short power-supply cord is provided to reduce risks resulting from beco-
ming entangled in or tripping over a longer cord. B. Longer extension cords may be used if care is exercised in their use. C. If a long extension cord is used, (1)the marked electrical rating of the exten-
sion cord should be at least as great as the electrical rating of the appliance,
(2) ifthe appliance is of the grounded type, the extension cord should be a
grounding-type 3-wire cord, and (3) the longer cord should be arranged so
that it will not drape over the counter top or table top where it can be pulled
on by children or tripped over.
CAUTION:
This appliance is for household use. Anyservicing other than cleaning and user main- tenance should be performed by an authorized service representative.
Do not immerse base in water or any other liquid.
Toreduce the risk of fireor electric shock, do not remove the base. Nouser servicea-
ble parts inside. Repair should be done by authorized service personnel only. . Check voltage to be sure that the voltage indicated on the name plate agrees with
yourvoltage. .
. Never use warm or hot water to fillthe water container! Use cold water only!
. Never refillthe water chamber while this KRljPS coffee maker is in operation, in
the "on" position, or inthe "1-3" or "4-max:fand "on" position. Turn the KRUPS coffee maker off and let cool down for 10 minutes before refilling with water.
. Bf#foreturningyourKRUPScoffeemaker on, please make sure that: .
1. The filter holder is properly inserted into the swivel filter;
2. the swivel filteris properly closed;
3. the lid for the glass carafe is properly attached to the glass carafe;
4. the glass carafe sits flat on the inside circle of the heating plate.
. Keep your hands and the cord away from hot parts of the appliance during opera-
tion.
. Neverclean withscouring powders or hard implements.
* *
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons,
including the following: . Read all instructions and information in this instruction book and any other
literature included in this carton referring to this product before operating or using this appliance.
. Do not touch hot surfaces. Use handles or knobs.
. Toprotect against electric shock, do not place cord, plugs, or appliance in
water or other liquid.
. Close supervision is necessary when any appliance is used by or near
children. .
. Unplugfrom outlet when not in use and before cleaning. Allowto cool before
putting on or taking off parts, and before cleaning the appliance.
. Do not operate any appliance with a damaged cord or plug or after the app-
liance malfunctions, or has been damaged in any manner. Return appliance
to an authorized service facilityfor examination, repair or adjustment.
.The use of an accessory not evaluated foruse with this appliance maycause
.injuries.
. Do not use outdoors.
/ . Do not let cord hang over edge of table or counter, or touch hot surfaces.
. Do not place on or near a hot gas or electric burner, or in a heated oven. . Todisconnect, turn any control to "OFF",then remove plug from wall outlet.
. Do not use appliance for other than intended use.
. Snap lidsecurely onto glass carafe before serving beverages.
. Do not remove glass carafe from warming plate while water is dripping from
the spout.
. Appliance with Glass Containers.
A. The container is designed for use withthese appliances. Itmust never be
used on a range top.
B. Donot set a hot container on a wet or cold surface. C. Donot use a cracked container or a container having a loose or weake-
ned handle.
D. Donot clean container withcleansers, steel wool pads, or other abrasive
material.
* *
*
SAVE THESE INSTRUCTIONS
~
(I)
e
*
e
~
YOU CAN ORDER
,( KRUPSFilTERPAPERS
AND KRUPS
GOlDPLATED FilTER
.1
AND OTHER
ACCESSORIES
DIRECTLYFROM
KRUPS. USE THE
HANDY MAILORDER
FORM ENCLOSED.
~
.
"
KRUPS "COFFEETIME" PLUS
ThisKRUPSspace savingcoffee maker hasthefollowing
features:
. ExclusiveKRUPSdeep-brew
system with special filtering action for maximum flavor.
. Starter touch mode strip for
fully automatic coffee
preparation. . Bright LEDclock/timer. . Sensortouch control display
with membraneswitches for
highest usercomfort and
excellence in design. . 24hour pre-programming. . 15minutepower failure back-
up.
. Automatic shut-off after 2
hours.
. When making less than 4
cups the electronic control
lets you slow down the
brewing process thus
insuring good coffee
every time.
. Double-wall filter cone
protects coffee aroma and ~aintains ideal temperature.
. Convenient swivel filter with
extra filter holder insert for utmost convenience and
safety.
. "Stop'n Serve" feature lets
you serve a cup or two while brewing. The automatic filter seal will allow you to remove
the carafe for 20 seconds without dripping onto the warming plate.
. Hinged water container lid
will not get lost and will protect the water container
from dust and dirt.
. Easyto seewater level
indicator makes measuring easyand serves as a quick
visual indicator ifcoffee is ready.
. Automatic warming plate will
Keep the coffee at drinking temperature for two hours.
Coffee solubles are chemically unstable! Therefore, coffee will
lose its aroma when kept hot for a prolonged period of time. We recommend not to serve coffee
which has been kept warm for more than 1hour due to the loss
of aroma. . Automatic warming plate has
anti-stick coating for easy cleaning. Raised edges keep carafe firmly in place.
. KRUPS special design of the
heating and tubing system minimizes the decalcifying
and leaves no residual water in the system when brewing
is finished.
. Hidden cord storage allows
youto set thecord lengthyou need.
KRUPS "COFFEE TIME" ELECTRONIC PROGRAMMING CONSOLE
KRUPS electronic proQ,famming console has been destJned for ease of operation and flawless performance. Sensor touch control di.play with membrane
switches for highest user comfort and excellence in
design. The membrane switches
for auto (k), full flavor selector (j) and ON/OFF (g) have indicator lights. Pushing one of these membrane switches will turn this
function ON/OFF. If the function
is turned on the corresponding indicator light will be illuminated.
SETTING THE DIGITAL CLOCK
1. Plug in the KRUPS "Coffee
Time Plus"
2. Make sure machine is turned off (the red light should NOT
be illuminated.
3. A row of flickering figures will show in the read-out display.
This is your signal to set the digital clock.
4. Press the "h" hour membrane switch and hold to advance
the proper read-out time. Watch the time display carefully as itadvances quickly. Then press the "min"
minute membrane switch to set the precise time.
NOTE
AM/PM Indicators: When setting the Digital clock or
programming for "Wake-Up" coffee, AM is indicated by a light illuminated in the upper left hand corner; PM is indicated inthe lower left hand corner of the LED display. (If you pass by the time you wish
to set, just repeat the setting
procedure).
PREPARING THE COFFEE
Before making your first pot of delicious coffee, we recommend
operating the coffee maker once or twice with water only, without ground coffee or filter paper to remove any possible dust.
. Be sure that the water
container is empty. Remove literature, etc. if inserted in
the water container.
. The lid of the glass carafe
must by properly positioned during the brewing process. The front hooks have to be inside the carafe and the
rectangular part of the lid has to be pushed down so that it engages with the handle of the glass carafe.
. To release the lid just push
the rectangular part of the lid upwards.
. Make sure that the swivel
filter is closed properly during the brewing process. When closing the swivel filter
you will feel anoticeable resistance when the handle of the swivel filter is
approximately '/2 inch away
from the non-removableside
.
part. Push in firmly until the handle touches the side of the coffee maker.
. Caution: If the swivel filter is
not pushed in properly the "Stop'n Serve" trigger can not function properly. This may cause hot water or hot coffee to overflow.
. The "Stop'n Serve"
mechanism is opened as long as the glass carafe is inserted into the machine
and sits properly on the warming plate and the swivel filter is closed properly. When brewing coffee make sure that the glass carafe is in place (see Stop'n Serve Section).
PUTTING IN THE GROUND COFFEE
Swing the swivel filter to your left
(see figure 0). Insert a paper filter (we recommend KRUPS size 4)with the seam pointing
towards the handle of the filter holder (see figure 0). Instead of
filter paper you can also use the
,tRUPS gold filter (model 'iF017).
(When ordering filter paper or the
.
gold filterfrom KRUPS be sure to indicate that they are for model 'iF136 & 'iF137).
Put ground coffee into the paper filter (see figure 0). We suggest using one level KRUPS measuring spoon of ground coffee for each cup of robust brewed coffee. After using your
KRUPS coffee maker several
times you can adjust the
measure to suit your own taste. (Close the swivel filter and make sure that it is completely closed [see figure 0]).
Attention: Make sure that the
filterpaperdoesnottipover
when closing the swivel filter. Otherwise the water might run between the filter paper and the filter holder producing a very weak cup of coffee.
FILLING THE WATER
CHAMBER
Open the hinged lid (see figure
0). Pour in the desired quantity of water (see figure 0). The water level indicator shows you how much water you are filling
into the container. The amount of freshly brewed
coffee delivered after the brewing process will always be
slightly less than the amount put into the water container. This is
due to the minimal absorption of the water by the ground coffee. Therefore, put in a little more water to begin with so that you will have the number of cups that you desire.
Replace the glass carafe on the warming plate with the glass carafe lid in position. Switch the
ON/OFF membrane to "ON". The indicator light will go on
indicating that the brewing process has begun (see figure
0).
SELECTING THE FULLEST FLAVOR
The KRUPS "Coffee Time Plus" models have afull flavor selector. If you want to make 1- ~ cups of coffee, press the full flavor membrane switch (see figure ~). A GREEN UGHTWILL
APPEAR INDICATING THE 1 - 3 CUP SELECTON.
This will extend the brewing cycles so that the water will seep
into the ground coffee slowly
enough to yield brewed coffee that is rich, aromatic, and truly
delicious.
In order to have truly aromatic
coffee, the hot water must be allowed to
ground coffee for a certain minimum time.
For making 4 - 12 cups, select
regular brewing. (The green light
is not illuminated).
seep throughthe
AUTO SHUT-OFF AND WARM
KEEPING
The KRUPS "Coffee Time Plus" is equipped with an automatic
shut-off feature, that will turn-off the machine 2 hours after the
brewing process has begun. (The red indicator light will turn off).
Benefits: . Thiswill preventcoffee from
losing its flavor . Energysaving . Safety feature
As long as the red indicator light above the ON/OFF membrane is
illuminated the coffee will be kept warm.
If you want to keep your coffee hot longer, push the ON/OFF membrane again.
SETTING "WAKE-UP"TIME
This feature enables you to enjoy
freshly brewed coffee at any pre-selected time within a twenty-four hour period. To use this feature, follow these instructions, AFTER setting the digital clock.
1. Press the program membrane
and a green light will appear indicating that the clock is ready to be programmed. Immediately press the "hour"
membrane and then the "minute" membrane to set a
program time (see figure ~). After a few seconds the LED
clock will jump back to the regular time.
2. The "Wake-Up" time is now
stored in the electronic memory.
3. Whenever you wish to check
the "Wake-Up" time that being programmed, simply press the 'program membrane and the "Wake-Up" time will be displayed for a few seconds.
.
is
.,.
In case you wish to change the "Wake-Up" time, press the program membrane, and proceed as described above.
PREPARING "WAKE-UP" COFFEE
To enjoy delicious "Wake-Up"
coffee that is freshly brewed and hot, set the "Wake-up" time you
desire. (See setting
time.)
"Wake-up"
. Put inthe ground coffee.
. Fill the water chamber with
the desired number of cups.
. Place carafe back on
warming platform.
. Press the "Auto" membrane
and the red light will
illuminate (see figure ~).
. Atthe pre-programmed time,
the auto light will go "OFF", and the light above the ONI OFF membrane will go on automatically indicating that the brewing process
has
begun.
In this position coffee willbe kept
warm for two hours. After that
time, the heating mechanism
shut-off automatically~(See
Under "AUTOMATIC SHUT-OFF
AND WARM KEEPING").
"STOP'N SERVE" FEATURE
The "Stop'n Serve" feature is
KRUPS' answer to the impatient coffee
drinker's clamor for "a
quick cup of coffee!" This device automatically stops the flow of brewed coffee through the filter cone if the glass carafe is
removed from the warming plate
during the brewing cycle. You have about 20 seconds between
the removal of the carafe and its being reinserted
serving of one or two cups of coffee.
The "Stop'n Serve" device
closes off the filter cone so
effectively that there is virtually
to allowthe
no coffee-drip onto the warming plate (one
the carafe is replaced, the brewing cycle and the flow of the
coffee into the carafe are resumed.
CAUTION Ifthe coffee does drip onto the
warming plate after removal of the carafe, it is usually an indication that the small black
seal in the filter holder is missing
or defective. (In this case you
can call our Customer Service Department at 1-800-526-5377 or in New Jersey call [201] 767-
5600). It is also possible that too much ground coffee has been placed into the paper filter. This causes the water that jets into
the filter cone to over flow
between
sides of the filter cone.
drop, at most!) Once
the paper filterand the
This over flow carries coffee
grounds with it that interfere with
the snap-shot action of the filter
holder, thus allowing brewed coffee to continue to drip
through. .
If this blockage and subsequent dripping do occur,
will
replace the glass carafe immediately and allow the.full
brewing cycle to run its course. Do not swing out the swivel filter until the brewing cycle is completed.
POWER FAILURE BACK-UP
In case of a power surge andlor failure, an electronic device will
keep all functions stored for 15 minutes.
For Example: If there is a power surge andlor
failure lasting for longer than 15 minutes, and the "Auto" light is "ON", then your wake-up coffee
will be cancelled out. If your coffemaker is "ON" and
there is a power failure it will
temporarily suspend the coffee
making process, but will continue if the power is restored within 15 minutes. (If the power failure is longer than 15minutes you will have to press the "ONI OFF" membrane again to resume coffee making).
If the power failure lasts longer than 15 minutes, all functions including time and pre- programmed time have to be reentered again. This will be indicated by a blinking LED display.
CLEANING
. Always unplug this appliance
before cleaning. Clean the filter holder, the carafe and carafe lid in a solution of hot
water and mild liquid soap. These parts can also be placed in the upper level of
your dishwasher for safe effective cleaning.
. Never use scouring agents.
. Never immerse the appliance
itself in the water or any other liquid. To clean, simply wipe off with a soft, damp cloth.
I
. Never use a cloth to clean the
inside of the water chamber, as this might leave fuzzy deposits in the chamber. Just. rinse with cold water, periodically.
DECALCIFYING
Although your KRUPS coffee
maker has the most advanced water heating and pumping system, it will periodically need cleaning with a decalcifying
agent.
. This is due to the calcium
(limestone) found in drinking
water.
. In some areas where the
water is hard,youwill need
to decalcify more frequently than in areas with soft water.
. It will alsodepend upon how
often you useyour coffee maker.
WHEN TO DECALCIFY
You will know when such cleaning is necessary by an
obvious slowdown in the brewing time of your coffee. This
extended time indicates that there isa calcium deposit inyour
coffee maker. We recommend using Krups original decalcifying agent for cleaning your KRUPS
coffee maker. If used in accordance with the following
instructions, it will prolong the life of your coffee maker.
HOWTO DECALCIFY
Dissolve contents of one package of Better Brew in two cups of cold tap water. Pour
solution into the water tank, then put the empty carafe and filter basket in place, and run the
coffeemaker until half the solution has flowed into the
glass carafe. Then turn the coffeemaker "OFF" and let stand
for 10mihutes. After the then minute cooling period is over,
turn the coffee maker back "ON" and let the rest of the solution
f~w into the carafe. Rinse by cycling clean water
through two or three times. Do this process twice, pausing and turning the coffee maker "OFF" for a few minutes in between each rinse session.
We recommend to decalcify with Better Brew 4 times per year or whenever the brewing cycle
slows down.
a
CAUTION KRUPS decalcifying agent is a
citricacidwhich isharmless.
However,we recommend keeping itout of the reach of children. Donot take internally.Ifswallowed accidently, drink several glasses ofwater ormilk and consult yourdoctor.
Forbest results. .. ... always use fresh, cold
water (warmwater mightbe stale and have mineral
deposits whichwouldimpair the flavor ofthe coffee).
...we recommend that you grind your own beans. Freshlyground beans
deliver more aroma and flavor.Use one KRUPS measuring spoon of beans per cup.
...serve coffee immediately after brewing. ... never reheat coffee.
LIMITED ONE YEAR WARRANTY
Your KRUPS product is covered by the following warranty (glass
carafes are excluded from warranty): If within one year from
the date of purchase, this KRUPS product fails to function
because of defects in materials or workmanship, ROBERT
KRUPS, North America, will, at its option, repair or replace the unit without charge, provided
the owner returns: . The KRUPS product
(securely packed) and . Proof of date of purchase to: KRUPS Customer Service
ROBERTKRUPS, North America 7 Reuten Drive
CLOSTER, N.J. 07624 Toassure prompt service, please
include a letter indicating the specific cause for returning your KRUPS product. Do not return any glass carafes or any other loose parts or any accessories which are not defective with your appliances to avoid damage and
loss in transit.
This warranty will be void if
malfunction was caused by dama!Je to the product by accident, misuse use on
frequency or voltage other than
marked on the product and/or
described in the instructions, abuse including tampering,
damage in transit, or use for commercial purposes. This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
GUARANTEEOF PERFORMANCE
This fine KRUPS product is manufactured according to a rigid code of quality standards, and, with a minimum of care, should give years of satisfying service. However, should the need arise for repairs or for replacement parts (within or after the warranty period), please do as follows for the most convenient, fastest
service. Note the type number of your KRUPS appliance. You will need this information
when calling our Customer Service Department, Type"" 136. ""137. For parts orders or any other questions on how to operate your KRUPS product,
call our CUSTOMER SERVICE DEPARTMENT toll free (Monday through Friday
[except holidays] from 9AM until4PM Eastern Standard Time) 1-800-526-5377
(in New Jersey call [201] 767-5600). For warranty and after-warranty service, send your KRUPS appliance to:
KRUPS Customer Service ROBERT KRUPS, North America
7 Reuten Drive CLOSTER, New Jersey 07624
Pack up your appliance carefully to avoid damage in shipping and be sure to provide us with the following information:
A. Your name and address and type number of the appliance on the outside
wrapping of the packaging.
B. Tape a brief note to the body of the maChin! indicating:
IMPORTANT: ONLYSEND THE DEFECTIVE APPLIANCE. KEEP ALL
We will repair or replace your KRUPS product without delay and send itback to yOUwith no charqe for shippinQ (ifyou send us a receipt for the regular UPS or Parcel Post charges, we willeven reimburse you for shipping charges, within or
after the warranty period). On all repair work to be done after the warranty period, our Customer Service
Department will billyou for material and labor only.
Do not return your appliance to the store. The KRUPS Guarantee of Perfor- mance program has been designed to provide you with the best possible ser-
vice using genuine KRUPS parts.
All repair work and replaced parts will carry an extended gO-day-warranty.
how long you own it; the possible defect.
* *
REMOVABLEPARTS ATHOME TOAVOIDFURTHER DAMAGE IN TRANSPORT!
"
*
Loading...