Kronos Sparta Assembly Instructions Manual
A
ASSEMBLY INSTRUCTIONS
THANK YOU
for purchasing the Kronos Sparta turntable.
The Sparta has been designed to produce the best sound reproduction possible from a vinyl
record. It is built without compromise for this single purpose. It is a state-of-the-art hand built
instrument. Each Sparta is individually constructed, assembled and tested to ensure years of
musical enjoyment.
It is important that you take the time to read this manual before assembling, installing and
operating your Sparta. Assembly is simple, provided you follow all the necessary steps.
Leveling of the turntable is particularly important.
Once this is done, you will find the Sparta will not require frequent adjustments as it is a very
stable platform. Of course, mandatory care must be given to setting up the tone arm and
cartridge, as in any other turntable. Make sure you use a quality protractor to properly align
the cartridge.
Please keep in mind that your Sparta will need to settle for its first few days of operation.
The self-learning speed guidance system will calibrate itself with use. After a few hours it will
attain speed more quickly with a minimum of fluctuation. The micro-processor controlled speed
adjustments are deliberately done in a slow and deliberate manner. This use of minimal power
reduces motor induced vibration and hence optimum musical enjoyment.
Enjoy.
Louis Desjardins
Designer and CEO of Kronos Audio Products inc.
1
1
Remove Sparta from the crate. Put Sparta on a solid
surface. Do not remove the Styrofoam spacer blocks
at this moment.
1
2
3
Remove Sparta from the crate. Put Sparta on a solid
surface. Do not remove the Styrofoam spacer blocks
at this moment.
Remove the suspension caps by loosening the screws
using the 5/32 spanner.
Remove top plate and set aside.
1
2
Remove Sparta from the crate. Put Sparta on a solid
surface. Do not remove the Styrofoam spacer blocks
at this moment.
Remove the suspension caps by loosening the screws
using the 5/32 spanner.
4
Adjust level of base using the 4 adjustable
feet and the level located in the base.
Remove Sparta from crate. Put Sparta on a solid
surface. Do not remove the styrofoam spacer blocks
at this moment.
2
Remove the suspension caps by loosening the screws
using the 5/32 spanner.
3
Remove top plate and set aside.
Adjust level of base using the 4 adjustable feet and the
4
level located in the base.
Loading...