Kriss Sport Superpunch BOXER User Manual
REDEMPTION
MULTIPLAYER
VIDEO
CLASSIC
Made in Europe by
King of Boxers
User Guide
Thank you for choosing our product!
Our machines are fully computerized coin-operated strength-testers used for amusement and
entertainment. You can use them in bars, pubs, amusement parks and other places of entertainment.
We made sure that all the components used for production as well as the machine itself are made of
best quality components and are safe for use.
Your machine is designed so that you can start using it right away.
WELCOME
1
BE SURE TO READ THE FOLLOWING
Warning: Always turn OFF power an unplug the game before opening or replacing any parts.
Warning: Always when unplugging the machine from electrical outlet, grasp the plug, not the cord.
Warning: Always connect the machine to grounded electrical outlet.
Caution: The wiring system is under voltage that is safe in normal use but may be harmful while
improper use.
Caution: Always use digital multimeter, logic tester or oscilloscope for testing integrated circuits.
Caution: Do not connect or disconnect any of the integrated circuits while the machine is ON.
Caution: Do not any fuse that does not meet the specified rating.
Caution: Do not subject the machine to extreme temperature variations.
SAFETY PRECAUTIONS
2
What’s in the package
Machine is supplied with a full range of accessories to help you get started right away.
• Key set for service door, prize door, and money door.
• Preinstalled CF card.
• Preinstalled rubber stands.
Notice: If you can’t find some parts, check inside prize exit door.
MACHINE DESCRIPTION AND TECHNICAL SPECIFICATION
3
General information
Game type: power / strength and precision tester
Allocation: indoor and outdoor (depends on version)
Notice: Before placing machine outdoor, make sure that your machine version is outdoor-ready.
Construction and mechanism: steel
Ball release mechanism: servo-mechanism
Color: red
Machine dimensions and weight
Height: 206cm / 81 inches
Width: 74cm / 29 inches
Depth: 155cm / 61 inches
Weight: 290kg / 640 lbs
Prize bar location diagram
Bars 1, 2, 3 and 4 are for big prizes.
Bars 5, 6, 7, 8, 9 and 10 are for small prizes.
Big prize maximum dimensions
Height: 25 cm / 10 inches
Width: 20 cm / 8 inches
Small prize maximum dimensions
Max height: 15 cm / 6 inches
Max width: 10 cm / 4 inches
4
LCD screen
Score, credit and record display
1
2
3
4
10
9
8
7
6
5
Electrical and operating requirements
Power: 90V - 250V
Current frequency: 50Hz - 60Hz
Idle power consumption: 95W
Average power consumption: 100W
Max power consumption: 105W
Currency
Working with all kinds of bills, coins and tokens.
Possibility of installing both coin and bill acceptors.
Optional extensions
•WiFi camera monitoring.
•WiFi access point with 3G modem.
•Ticket dispenser.
•SMS acceptor.
•Ticket printer.
Casing and glass
Casing: full metal casing, 1,5 mm thick, powder coated.
Prize cabinet: tempered glass, 6 mm / ¼ inch thick or optional toughened polycarbonate, 6 mm / ¼
inch thick.
Upper illuminated parts: polycarbonate, 2 mm thick.
Displays
Main display: 22-inch LCD, 16,7 millions of colors, FullHD support.
Segment display: red score, credit and best score display with 64 flashing points.
5
Software regulated features
•Volume.
•Credit settings.
•Free-play mode.
•Ticket dispenser settings.
•Power correction.
•Game level.
•Best score limit.
•Best score drop-down delay, drop-down value and drop-down range.
•Clear active credits.
Notice: See full description of software regulated features in the Settings section.
Operation modes
1. OFF
2. Booting
3. Normal operation mode
a. Standby
b. Game
c. Prize give out
4. Settings
5. Error
6
The machine is designed so that you can set it up quickly and start using it right away.
Installation
1. Place the machine at the desired location.
Warning: If your machine version is not outdoor-ready, do not install the machine outdoors or in areas
with high humidity, direct water contact, high heat or extreme cold.
Warning: Do not install the machine in areas that would present an obstacle in case of an emergency.
Caution: To move the machine for transport, use a forklift and take care not to hit the package. Do not
stack heavy objects on top of the machine, as this may cause damage.
Notice: To move the machine for placement, use machine wheels that are ready for transport when
the rubber stands are screwed all the way up.
INSTALLATION AND MAINTENANCE
7
2. Use preinstalled rubber stands to make sure that the machine is standing secure on the ground.
3. Remove the package wrapping from the machine.
4. Adjust rubber stands to make sure that the machine is level.
5. If the machine is cold, open machines back door and wait about 30 minutes for the electronics to
warm up.
6. Connect the power cord to power outlet and check if machine is working.
Volume adjustment
1. Turn ON the machine and wait for normal operation mode.
2. Open back door and locate main board.
3. Insert credits or set the machine to Free Play Mode (described in Settings section).
4. Use S2 and S3 buttons on the main board to adjust volume.
Fitting prizes on the prize bars
1. Make sure that the machine is OFF.
2. Open prize door.
3. Remove prize locking pin.
Notice: In order to remove the prize locking pin, you have to unscrew it clockwise.
4. Load the prize bar with prizes.
Notice: Make sure that the hanging ties are attached securely. Remember to leave 3-finger gap in the
hanging tie.
Caution: Make sure that prizes are not bigger than described in Machine description and technical
specification section. Bigger prizes could block the machine.
Notice: Make sure that prizes are placed apart on the bar.
5. Reinsert the locking pin.
Caution: Make sure that the locking pin is placed above hanging ties.
6. Close the door
8
Loading...