For over a decade, KRAUS has been transforming ordinary spaces into
extraordinary kitchens and bathrooms, with the goal of bringing quality and
value into every home. Kraus focuses on designing long-lasting, easy-toinstall, low-maintenance solutions that help customers create a cleaner and
more enjoyable living environment. Best known for kitchen sinks, Kraus oers
the best value for your money by using high-grade materials, proprietary
technologies, and premium value-added items. We strive to continuously raise
the bar in terms of quality, function, and design. Transform your kitchen and
bath with Kraus, and experience Innovation for Real Life™.
To maintain the beautiful luster of the stainless steel,
Kraus recommends cleaning your sink once a week
using water and a mild liquid soap detergent (ammonia-free). Apply the cleaner with a soft sponge, thoroughly rinse with lukewarm water, and pat dry with a microfiber cleaning cloth.
HARD WATER SOLUTIONS & DEEP CLEANING
If hard water deposits build up over time, we recommend using vinegar to neutralize the minerals and
remove the deposits. Use a soft dishcloth saturated
with vinegar to gently rub the sink surface, then rinse
with water and towel dry.
MAXIMUM SURFACE PROTECTION
Kraus stainless steel bottom grids are designed to
protect the finish on the bottom of the sink bowl. These
grids are included with most Kraus stainless steel sink
models. If you need a replacement grid, our customer
service team will be happy to help! P 800-775-0703 | E
customerservice@ kraususa.com
SURFACE SCRATCHES
Brite Natural Fiber Non-Scratch Scour Pad, accompanied
by a deep cleansing agent such as Bar Keepers Friend.
THINGS TO AVOID
• DO NOT use cleaners containing any abrasive powders, bleach, ammonia, alcohol, or chlorine
• DO NOT use any abrasive pads, steel wool, or wire
brushes when cleaning the sink (use non-scratch cleaning pads ONLY)
• DO NOT use cleaners containing chloride or chlorine.
If these ingredients come in contact with the sink,
minimize any potential damage by rinsing the sink surface immediately to prevent corrosion and permanent
damage
PRODUCTS TO CONSIDER
• Weiman® Stainless Steel Cleaner
• Howard Naturals® Stainless Cleaner
• Fantastik® Antibacterial Heavy Duty Cleaner
• Green Works® All-Purpose Cleaner
• Green Works® Glass Cleaner
• Windex® Original Glass Cleaner
• Soft microfiber cloth
• Sponge
• 3M Scotch Brite® Non-Abrasive Pad (for tougher stains)
Surface scratches resulting from normal use are common in stainless steel sinks. Over time, with proper
cleaning, they will fade away and blend into the overall
finish of your sink. Most minor scratches can be softened
with a fine (white) 3M Scotch Brite pad, or 3M Scotch
Kraus PVD sinks are a showpiece in any kitchen, with
a modern yet timeless appearance that is incredibly
easy to maintain. Proprietary DuraShield™ finish application results in a color coating that bonds completely
to the sink, resulting in unparalleled durability with
superior resistance to abrasion, chips, and corrosion.
The sandblasted matte texture resists water spots and
fingerprints, so the sink stays cleaner longer. Maintenance is as simple as wiping down the sink surface with
a microfiber cloth after use.
Kore™ Workstation Sink (KWF-410PGM)
kraususa.com5 | CARE & CLEANING GUIDE
Page 6
GRANITE KITCHEN SINKS
GENERAL CLEANING
To prevent water spots, clouding, and discoloration, rinse
and wipe the inside of the sink with a microfiber cleaning
cloth after every use. For a more thorough cleaning, use
water and a mild liquid soap detergent (ammonia-free).
Apply the cleaner with a soft sponge or nylon brush and
scrub in circular motions. Remember to thoroughly wash
away any extra soap left behind after cleaning.
HARD WATER SOLUTIONS & DEEP CLEANING
To prevent mineral deposits from forming on the sink
in areas with hard water, rinse the inside of the sink
and wipe it with a microfiber cleaning cloth after every
use. To deep-clean tough stains, products to consider
include: Mr. Clean Magic Eraser, Supreme Surface Scum
& Mineral Deposit Remover. Make sure to follow the
cleaning instructions provided by the product’s manu-
facturer.
THINGS TO AVOID
• DO NOT place pots, pans, or utensils straight from the
stove directly on the sink surface
• DO NOT use cleaners containing any abrasive powders, bleach, ammonia, alcohol, or chlorine. These products may damage the sink surface
• DO NOT use any abrasive pads, steel wool, or wire
brushes when cleaning the sink. Using these will damage and/or wear down the sink surface
• DO NOT leave pots, utensils, or standing water in the
sink, as this may cause rust stains on the surface of the
sink
• Although Kraus granite and quartz composite sinks are
highly heat resistant, placing hot items right from the
stove or oven directly into the sink may cause surface
discoloration. Consider using a trivet or rolling mat for
extremely hot items to avoid potential heat damage
• DO NOT place hot items from the stove or oven directly into the sink. Consider using a trivet or rolling mat for
extremely hot items to avoid potential heat damage
PRODUCTS TO CONSIDER
• Supreme Surface® Granite Cleaner & Conditioner (may
be used daily)
Fireclay is extremely stain resistant and rust-proof, so
you can simply wipe away most food residue and liquids.
For optimal results, we recommend rinsing the inside of
your sink and wiping it with a microfiber cleaning cloth
after every use. For a more thorough cleaning, use water
and a mild liquid soap detergent (ammonia-free) or a
product from the “Products to Consider” section below.
Apply cleaner with a soft sponge or microfiber cloth,
then thoroughly rinse with lukewarm water and pat dry
with a microfiber cleaning cloth. You can also use baking
soda (or even a mild abrasive cleaner) to clean o stuckon food residue.
HARD WATER SOLUTIONS & DEEP CLEANING
To prevent mineral deposits from forming on the sink in
areas with hard water, rinse the inside of the sink and
wipe it with a microfiber cleaning cloth after every use.
To maintain a long-lasting shine, you can use bleach
with hot water to clean, sanitize, and maximize the
luster of your fireclay sink. Fill your sink with hot water,
adding a cup or two of bleach when about halfway full.
Let the bleach/water solution sit until it cools to room
temperature, then drain the sink and re-fill it with clean
water to rinse away any residue.
Applying a thin layer of liquid wax to the surface of
your fireclay sink once a month can make cleanup easier. The wax prevents food and liquid from sticking to
the sink surface, making it easier to simply wash debris
down the drain.
THINGS TO AVOID
• DO NOT leave coee grounds, tea bags, or other staining material in contact with the fireclay surface for extended periods of time
• DO NOT use abrasive pads, steel wool, or wire brushes
when cleaning the sink. Use only soft sponges – Although
soft abrasive cleaners (e.g. blue Scotch Brite pad) may
be used when necessary, strong abrasive cleaners (e.g.
green Scotch Brite pad) may scratch and dull the sink
surface
• DO NOT use abrasive substances such as scouring powders, steel cleaners, or concentrated drain cleaners
• DO NOT place hot items from the stove or oven directly into the sink. Consider using a trivet or rolling mat for
extremely hot items to avoid potential heat damage
The smooth non-porous enamel surface is extremely
stain resistant, so you can simply wipe away most food
residue and liquids. For optimal results, we recommend rinsing the inside of your sink and wiping it with
a microfiber cleaning cloth after every use. For a more
thorough cleaning, use water and a mild liquid soap
detergent or a product from the “Products to Consider” section below. Apply cleaner with a soft sponge or
microfiber cloth, then thoroughly rinse with lukewarm
water and pat dry with a microfiber cleaning cloth.
HARD WATER SOLUTIONS & DEEP CLEANING
To prevent mineral deposits from forming on the sink in
areas with hard water, rinse the inside of the sink and
wipe it with a microfiber cleaning cloth after every use.
CHIPS AND CRACKS
Kraus Enamel Sinks are extremely resistant to chips,
cracks, and other damage caused by dropped items.
Should you experience damage to the enamel coating due to an exceptionally heavy impact, suitable
Porcelain-enamel chip repair kits can be found at
most home improvement stores
THINGS TO AVOID
• DO NOT leave co!ee grounds, tea bags, or other
staining material in contact with the fireclay surface for
extended periods of time
• DO NOT use abrasive sponge pads, steel wool, or
wire brushes when cleaning the sink. Use only soft
sponges
• DO NOT use cleaners containing any abrasive powders, ammonia, alcohol, or undiluted bleach
• DO NOT place hot items from the stove or oven
directly into the sink. Consider using a trivet or rolling
mat for extremely hot items to avoid potential heat
damage
The non-porous surface of KRAUS solid surface composite sinks is enhanced with innovative Nano technology,
making it impervious to stains and water spots as well as
extremely easy to clean. For light cleaning and maintenance, you can use water and a mild liquid soap detergent or a vinegar and water solution. Apply the cleaner
with a soft microfiber cleaning cloth or soft (non-abrasive) sponge. Wipe in circular motions, then rinse with
lukewarm water and pat dry with a microfiber cleaning
cloth.
HARD WATER SOLUTIONS & DEEP CLEANING
To prevent mineral deposits from forming on the sink in
areas with hard water, rinse the inside of the sink and
wipe it with a microfiber cleaning cloth after every use.
Occasional use of a microfiber cleaning cloth and baby
oil to treat all surfaces is suggested.
SCRATCHES AND SCUFFS
Kraus Solid Surface Sinks are extremely resistant to
chips, cracks, abrasions, and other damage caused by
dropped items. Should you experience damage from
heavy use, minor chips and scratches can easily be
resolved due to the renewable properties of the solid
surface material – Simply bu the aected area with a
fine-grit abrasive paper until the mark disappears.
THINGS TO AVOID
• DO NOT use abrasive pads, steel wool, or wire brushes when cleaning the sink. Please be careful with any
materials containing abrasives
• DO NOT spill chemicals such as paint stripper, metal
cleaners, or cleaners containing methylene chloride or
acid into the sink. Any spills of such chemicals should
be washed away immediately with soapy water
• DO NOT use cleaners that contain lime removal
agents such as CLR or Lime-A-Way
• DO NOT leave metal objects or standing water in the
sink
• DO NOT use products containing artificial dyes
• DO NOT use water that exceeds 70°C (158°F) as this
constitutes improper use, which may damage the sink
and invalidate the warranty
The smooth non-porous ceramic surface is extremely
durable and stain-resistant. To prevent water spots,
clouding, and discoloration, rinse and wipe the inside
of the sink with a microfiber cleaning cloth after every
use. For a more thorough cleaning, use water and a mild
liquid soap detergent or a product from the “Products
to Consider” section below. Apply cleaner with a soft
sponge or microfiber cloth, then thoroughly rinse with
lukewarm water and pat dry with a microfiber cleaning
cloth.
HARD WATER SOLUTIONS & DEEP CLEANING
To prevent mineral deposits from forming on the sink in
areas with hard water, rinse the inside of the sink and
wipe it with a microfiber cleaning cloth after every use. If
hard water deposits build up over time, we recommend
using vinegar to neutralize the minerals and remove the
deposits. Use a soft dishcloth saturated with vinegar to
gently rub the sink surface, then rinse with water and
towel dry.
To combat tough stains like rust (caused by mineral
deposits from the water supply) or toothpaste residue
buildup, use a solution of baking soda and vinegar.
Combine the two ingredients into a paste and apply
directly to the stain. Let the paste sit for 10 minutes, then
rinse with lukewarm water and pat dry with a microfiber
cleaning cloth.
THINGS TO AVOID
• DO NOT use cleaners containing any abrasive powders, bleach, ammonia, alcohol, or chlorine
• DO NOT use any abrasive pads, steel wool, or wire
brushes when cleaning the sink (Use only non-scratch
pads)
To keep your glass sink looking like new and prevent
water spots and clouding, rinse and wipe the inside of
the sink with a microfiber cleaning cloth after every use.
For a more thorough cleaning, use water and a mild
liquid soap detergent or a product from the “Products
to Consider” section below. Apply cleaner with a soft
sponge or microfiber cloth, then thoroughly rinse with
lukewarm water and pat dry with a microfiber cleaning
cloth. For heavy-duty cleaning, we recommend using
Rejuvenate Glass and Ceramic Restorer to clean and
restore luster while creating a non-stick barrier to make
future cleanup easier.
HARD WATER SOLUTIONS
To prevent mineral deposits from forming on the sink in
areas with hard water, rinse the inside of the sink and
wipe it with a microfiber cleaning cloth after every use.
If hard water deposits build up over time, we recommend using vinegar to neutralize the minerals and remove the deposits. Use a soft dishcloth saturated with
vinegar to gently rub the sink surface, then rinse with
water and towel dry.
To combat tough stains like toothpaste residue buildup,
use a solution of baking soda and vinegar. Combine
the two ingredients into a paste and apply directly to
the stain. Let the paste sit for 10 minutes, then rinse
with lukewarm water and pat dry with a microfiber
cleaning cloth
THINGS TO AVOID
• DO NOT use cleaners containing any abrasive powders, bleach, ammonia, alcohol, or chlorine
• DO NOT use any abrasive pads (Use only non-scratch
pads)
Keep your faucet looking newer longer with Spot-Free
all-Brite™, a finish that requires less cleaning and shines
longer by resisting water spots, fading, and fingerprints.
For general maintenance of all-Brite™ faucets, we recommend cleaning your faucet with mild soap, rinsing
thoroughly with warm water, and drying with a clean,
soft cloth.
For general maintenance, periodically clean the faucet
with your choice of cleaner from the “Products to Consider” section below. We recommend spot-testing any
new cleaner on a hidden area of your faucet before
applying it to the entire surface. All cleaners should
be rinsed o thoroughly with water immediately after
cleaning your faucet.
HARD WATER SOLUTIONS & DEEP CLEANING
To prevent the buildup of water spots, rinse and wipe
your faucet thoroughly with a damp cloth, then pat dry
with a microfiber cleaning cloth for optimal results.
THINGS TO AVOID
• DO NOT use cleaners containing any abrasive powders, bleach, ammonia, alcohol, vinegar, or chlorine.
• DO NOT use abrasive pads, steel wool, or wire
brushes when cleaning the faucet.
PRODUCTS TO CONSIDER
• Fantastik® Antibacterial Heavy Duty Cleaner
• Green Works® All-Purpose Cleaner
• Green Works® Glass Cleaner
• Windex® Original Glass Cleaner
• Soft microfiber cloth
• Sponge
Oletto™ Kitchen Bar Faucet (KPF-2822MB)Esta™ Vessel Bathroom Faucet (KVF-1210GM)
kraususa.com13 | CARE & CLEANING GUIDE
Page 14
SENSOR FAUCET
Kraus Sensor Faucets are designed with hands-free
capabilities, so they stay cleaner longer, with fewer
spots and finger smudges over time. To clean and
maintain your sensor faucet, simply follow the care
instructions for Kraus Kitchen Faucets (Spot-Free
Finishes or All Other Finishes), and enjoy the added
benefit of ultra-clean hands-free functionality.
Bolden™ Sensor Faucet (KSF-1610MB)
kraususa.com14 | CARE & CLEANING GUIDE
Page 15
KITCHEN ACCESSORIES
GENERAL CLEANING
For general maintenance, we recommend using water
or water with a mild liquid soap detergent to clean the
accessory and dry it with a microfiber cleaning cloth
after use. Apply your choice of cleaner from the “Products to Consider” section below with a soft sponge or
cloth, then thoroughly rinse with lukewarm water and
pat dry with a microfiber cleaning cloth.
PRODUCT-SPECIFIC CLEANING
• All Kraus accessories specified as DISHWASHER-SAFE can be washed in the dishwasher or rinsed by
hand
• Accessories not specified as dishwasher-safe (including wood cutting boards) should be hand washed with
a mild detergent, rinsed thoroughly, and dried with a
microfiber cleaning cloth
• If possible, use separate cutting boards for fresh produce and raw meat, poultry, or seafood
• If you are washing a stainless steel bottom grid in
the dishwasher, make sure to remove all rubber feet
and bumpers. Make sure to replace all rubber feet and
bumpers after washing prior to using your bottom grid
HARD WATER SOLUTIONS & DEEP CLEANING
To prevent water spots from forming, make sure to pat
accessories dry with a microfiber cleaning cloth after
use, especially stainless steel accessories with mirror
finish (e.g. serving bowls)
THINGS TO AVOID
• DO NOT use abrasive pads, steel wool, or wire
brushes when cleaning the accessories. Use only soft
sponges
• DO NOT wash accessories not specified as DISHWASHER-SAFE in the dishwasher. These accessories
should be rinsed with water and/or hand-washed with
a mild detergent
PRODUCTS TO CONSIDER
• Dishwashing soap
• White vinegar + water solution 50/50
• Fantastik® Antibacterial Heavy Duty Cleaner
• Formula 409® Antibacterial All-Purpose
Kitchen Soap and Lotion Dispenser (KSD-80ORB)Kitchen Soap and Lotion Dispenser (KSD-80ORB)
kraususa.com15 | CARE & CLEANING GUIDE
Page 16
BOTTOM GRIDS
GENERAL CLEANING
A great way to protect the bottom of your kitchen sink
against wear and tear from everyday use, Kraus bottom
grids are made with premium stainless steel for durability and easy maintenance.
To prevent build-up over time, rinse both sides of the
grid after using your sink, and pat dry with a microfiber
cloth. For a more thorough cleaning, use water and a
mild liquid soap detergent (ammonia-free) or a product
from the “Products to Consider” section below. Apply
cleaner with a soft sponge or microfiber cloth, then
thoroughly rinse with lukewarm water and pat dry with
a microfiber cleaning cloth.
DEEP CLEANING
Although bottom grids are a highly useful and versatile accessory, they can also be a magnet for dirt and
debris from all your kitchen tasks. For a deeper clean
from stuck-on food, you can do the following:
• Put it in your dishwasher! Kraus bottom grids are
dishwasher-safe – just make sure to take o the rubber
feet and bumpers. To fit large grids into the dishwasher,
try removing the top rack and placing the grid in the
bottom rack
• Fill your sink with hot water and soap-suds and place
the grid face down to soak. Use a scrub brush and
dish soap, or a soft cleanser like Bar Keeper’s friend, to
tackle trouble spots, then rinse thoroughly with water
• Make a paste from baking soda and lemon and let it
sit on trouble spots, then scrub and rinse thoroughly
with water
THINGS TO AVOID
• DO NOT wash rubber feet and bumpers in the
dishwasher. These should be rinsed with water and/or
hand-washed with a mild detergent
PRODUCTS TO CONSIDER
• Dishwashing soap
• White vinegar + water solution 50/50
• Mild bleach solution
• Food-grade mineral oil
Turino™ 30” Fireclay Sink (KFD1-30) and Bottom Grid (KBG-FC2614)
kraususa.com16 | CARE & CLEANING GUIDE
Page 17
WOOD CUTTINGBOARDS
Kraus cutting boards are designed to enhance the
functionality of your kitchen sink. Simple care and maintenance will ensure long-lasting use.
BAMBOO
Naturally non-porous and eco-friendly, bamboo oers a
durable cutting surface that’s easy to clean
ACACIA
Sustainable acacia wood makes for a super-sturdy cutting board with a naturally hygienic non-porous surface
WOOD COMPOSITE
With a naturally hygienic non-porous surface that prevents odors and stains, composite cutting boards are an
excellent choice for the busy kitchen
ALL MATERIALS
• For general maintenance after each use, wash the
cutting board with plain water or water with a mild liquid
soap detergent, and dry it with a microfiber cleaning
cloth or air-dry upright
• If possible, use separate cutting boards for fresh produce and raw meat, poultry, or seafood
• All wooden cutting boards wear out over time. Once
cutting boards become excessively worn or develop
hard-to-clean grooves, they should be discarded
DEEP CLEANING & MAINTENANCE
For a deeper clean every few weeks, generously sprinkle coarse salt over the surface of the board, rub it with
a sliced lemon, then rinse well with hot water.
To seal and protect your board, especially after cleaning
with a bleach solution, rub a small amount of food-safe
oil (like food-grade mineral oil) into the board to protect
the surface from drying out.
THINGS TO AVOID
• DO NOT wash accessories not specified as DISHWASHER-SAFE in the dishwasher. These accessories
should be rinsed with water and/or hand-washed with a
mild detergent
PRODUCTS TO CONSIDER
• Dishwashing soap
• White vinegar + water solution 50/50
• Mild bleach solution
• Food-grade mineral oil
Kore™ Workstation Sink (KWT311-25) and Bamboo Cutting Board (KCB-WS02BB)
kraususa.com17 | CARE & CLEANING GUIDE
Page 18
SILICONE ACCESSORIES
GENERAL CLEANING
Kraus silicone and silicone-coated accessories are made
with 100% food-safe and BPA-free silicone. Simple care
and maintenance will ensure long-lasting use. The waterproof construction of Kraus silicone accessories allows
you to simply wipe away spills for easy maintenance.
Wipe the surface of your silicone kitchen accessory with
water and a soft sponge or cloth to remove dust or any
adhering particles.
DEEP CLEANING
For a deeper clean, you can simply place your silicone
accessory into the dishwasher – please check to make
sure that the item is markes as dishwasher-safe. You can
also use a grease-cutting dishwashing soap and very hot
water, or immerse the accessory in boiling water or place
it in the oven to sterilize after use – the heat-safe construction will ensure that the high temperature does not
damage your accessory. For heavy-duty spot cleaning,
make a thick paste with baking soda and apply to the
areas you wish to clean, then wash with dish detergent
and hot water.
THINGS TO AVOID
• DO NOT wash accessories not specified as DISHWASHER-SAFE in the dishwasher. These accessories
should be rinsed with water and/or hand-washed with a
mild detergent
• DO NOT use abrasive sponges or cleaners, as these
can damage the silicone surface
Kraus stainless steel kitchen accessories are designed
for durability and easy maintenance. For general maintenance and to prevent build-up over time, we recommend
using water or water with a mild liquid soap detergent to
clean the accessory and dry it with a microfiber cleaning
cloth after use. Apply your choice of cleaner from the
“Products to Consider” section below, then thoroughly
rinse with lukewarm water and pat dry with a microfiber
cleaning cloth.
DEEP CLEANING
For a more thorough cleaning, use water and a mild
liquid soap detergent (ammonia-free) or a product from
the “Products to Consider” section below. Apply cleaner
directly to the accessory with a soft sponge or microfiber
cloth, then thoroughly rinse with lukewarm water and pat
dry with a microfiber cleaning cloth. To remove stuck-on
food or grime, you can also fill your sink with hot water
and soap suds or a mild liquid cleanser and place the
accessories in the sink to soak. Use a scrub brush and
dish soap, or a soft cleanser like Bar Keeper’s friend,
to tackle any trouble spots, then rinse thoroughly with
water. Since Kraus stainless steel accessories are dishwasher-safe, you can also place them in the dishwasher
for easy maintenance.
THINGS TO AVOID
• DO NOT wash accessories not specified as DISHWASHER-SAFE in the dishwasher. These accessories
should be rinsed with water and/or hand-washed with
a mild detergent
• DO NOT use abrasive sponges or cleaners, as these
can damage the stainless steel surface
A dishwasher air gap prevents dirty dishwater from
backflowing into fresh water lines. Over time, residue
can build up inside the air gap and form a clog. To clean
your air gap, follow the steps below:
• Remove the metal cover of the air gap
• Unscrew the plastic cap//remove the plastic diverter***
• Remove any material, e.g. food particles or grease, that
may have accumulated
• Check the hose from the air gap to the drain or garbage disposal for clogs
DEEP CLEANING
Use a bottle brush (highly recommended) and household
disinfecting cleaner to deep-clean and deodorize the
air gap, especially if you notice a smell or water starts to
leak. Disassemble the air gap following the instructions
in General Cleaning, then soak the brush in cleaner and
plunge it up and down into the air gap to loosen any
blockage and remove stuck-on grime.
THINGS TO AVOID
• DO NOT ignore water coming from the air gap, as that
is an indication that the air gap is clogged
PRODUCTS TO CONSIDER
• Bottle brush
• Formula 409® Antibacterial All-Purpose
• Fantastik® Antibacterial Heavy Duty Cleaner
• White vinegar + water solution 50/50
Oletto™ Pull Down Faucet (KPF-2820SFACB) and Air Gap (KAG-1SFACB)
kraususa.com20 | CARE & CLEANING GUIDE
Page 21
DRAIN ASSEMBLIES
GENERAL CLEANING
The humble drain assembly is actually a major part of
keeping your kitchen sink clean, ensuring that everything functions properly by keeping the drainpipe free
of debris.
To keep your sink drain looking its best, periodically
clean the drain assembly and strainer with water and a
mild liquid soap detergent, making sure to rinse thoroughly and dry with a microfiber cloth to maximize luster.
To prevent discoloration, always rinse and wipe the
drain and bottom of your sink when you’re done using
it, and avoid leaving staining substances like coee and
teabags in the sink or on the drain assembly.
DEEP CLEANING
Between food debris, hard water stains, and general gunk from dishwashing and other kitchen tasks,
your drain assembly and strainer may need a deeper
cleaning. If food particles have collected in the openings of the strainer, pick the debris out with a fork and
then wipe down the strainer and sides of the drain
assembly with a mild detergent that has grease-cutting
properties. To get your stainless steel drain assembly
sparkling clean, use lemon juice and a paste made
from baking soda and water to scrub, then rinse thoroughly with warm water and dry with a microfiber cloth.
If stains remain, you can soak a paper towel in distilled white vinegar, then lay the paper towel over the
stained area and let it sit for 20 minutes.
THINGS TO AVOID
• DO NOT place items or substances that can cause
stains, such as tea bags or coee, into the bottom of
your sink or directly onto the drain assembly
For general maintenance, periodically wipe the bathroom accessory with a soft microfiber cloth, or use
your choice of cleaner from the “Products to Consider”
section below. We recommend spot-testing any new
cleaner on a hidden area of the accessory before applying it to the entire surface.
THINGS TO AVOID
• DO NOT use cleaners containing any abrasive powders, bleach, ammonia, alcohol, vinegar, or chlorine.
• DO NOT use abrasive pads, steel wool, or wire brushes
when cleaning the faucet.
PRODUCTS TO CONSIDER
• Fantastik® Antibacterial Heavy Duty Cleaner
• Green Works® All-Purpose Cleaner
• Green Works® Glass Cleaner
• Windex® Original Glass Cleaner
• Soft microfiber cloth
Ventus™ Series Bathroom Accessories in Brushed Nickel Finish
kraususa.com22 | CARE & CLEANING GUIDE
Page 23
KRAUS WARRANTY
We’ve Got You Covered
Kraus products are manufactured and tested to the highest quality standards
by Kraus USA Inc. (“Kraus”). We extend our warranty to the original purchaser
for personal household use of the product in its original location.
For complete warranty information, visit: http://www.kraususa.com/warranty.html
CUSTOMER SUPPORT
Kraus Customer Support: Your Partner for a Lifetime of Care