Kraus KVF1400SFS2PK, KVF1400BGPU10BG, KVF1400MBPU10MB, KVF1400BG2PK, KVF1400MB2PK User Manual
...
www.kraususa.com I Toll Free: 1.800.775.0703 I © 2018 Kraus USA Inc. I REV. September 24, 2019
Indy
TM
Single Lever Vessel Faucet
KVF-1400
R
INSTALLATION MANUAL
2
Congratulations on the purchase of your new
Kraus plumbing fixture!
Please keep the box and packaging materials until your product is
completely installed. If you have any questions, require technical
assistance or have any problems with your product:
Please contact our Customer Service Team
1-800-775-0703 / customerservice@kraususa.com
Have the model number available and retain a copy of your
receipt with purchase date for reference.
If for any reason this product does not meet your expectations,
please be sure to repack this product in the original box and
packaging material to avoid damage during transit.
DO NOT RETURN TO STORE
STOP
Prior to Installation:
· Make sure you have all necessary parts by checking the diagram and
parts list. If any part is missing or damaged, please contact Kraus
Customer Service at 800-775-0703 for a replacement.
· Turn off the hot and cold water supply at the angle stops and turn on
the old faucet to release any built up pressure. Remove existing faucet.
Clean sink or countertop to remove any debris, plumber’s putty, or
silicone.
· Flush angle stops to release any debris prior to installation.
· Pre-drilled hole size requirement: 1 3/8" (min)
· Max countertop thickness: 1 3/4”
3
Tools Required
Adjustable Wrench Phillips Screwdriver Silicone Sealant
Safety Goggles
For technical assistance or replacement parts, please contact Kraus
Customer Service and one of our representatives will be happy to help:
Toll-Free: 800-775-0703 or Customerservice@kraususa.com
Pipe Tape
44
Diagram and Parts List
A. Faucet Body
B. Metal Base Ring
C. Rubber Washer
D. Metal Washer
E. Mounting Nut
F. Mounting Screws
G. Hex Wrench
A
G
E
F
C
B
D
55
Installer Tip:
Shut off main water supply before installing new faucet.
Faucet Dimensions
2 x 9/16"-UNEF-24
Ø1 5/8"
(40mm)
Ø2"
(50mm)
Max.
1 3/4"
(45mm)
Ø1 3/8"
~
1 5/8"
hole size
(35~40mm)
9 1/4"
(236mm)
5 1/8"
(131mm)
10"
(255mm)
10 7/8"
(278mm)
10 1/2"
(266mm)
66
Step 1. Install faucet and mounting hardware
Place the faucet (A) through the
mounting hole in the sink until
the faucet (A) sits on top of the
sink. Secure the faucet (A) to the
sink using the rubber (C) and
metal washers (D), mounting nut
(E) and mounting screws (F)
provided.
Step 2. Connect waterlines to main valve
Attach waterlines to angle stops
and tighten until snug. Turn on
angle stops and check for leaks.
(DO NOT TURN FAUCET ON)
A
C & D
E
F
C & D
E
F
NOTE: Make sure filter washers
are installed.
7
Replacement Parts
1
5
2
3
14
4
6
7
8
12
11
9
13
1. Metal Handle
2. Handle Button
3. Set Screw M5x6RB
4. Cartridge Cover
6. Locking Nut
7. Cartridge
8. Aerator
9. Metal Base Ring
10. Rubber Washer
12. Mounting Nut
Replacement Parts List Finish/Color Part #
KP06177
KP06026
KP06052
KP06080
KP06059
KP06176
KP06101
KP06183
KP06181
KP06041
KP06028
KP06067
KP06068
KP06050
KP06185
GR, BL, YL*
5. O-Ring
11. Metal Washer
SFS,MB,CH,BG*
*Denotes faucet component color options:
BG - Brushed Gold
CH- Chrome
MB - Matte Black
SFS - Spot Free Stainless Steel
BL - Black
GR - Grey
YL - Yellow
13. Mounting Screws
15. Filter Washers
14. Hex Wrench 2.5mm
SFS,MB,CH,BG*
SFS,MB,CH,BG*
10
15
8
Trouble-Shooting
If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps:
Leakage under the faucet
handle
Bonnet nut has come loose. Remove the index. Loosen set screw with
hex wrench. Remove the handle. Unscrew
cap (by hand only). Tighten bonnet nut
with an adjustable wrench.
Aerator drips or has inconsistent
water flow pattern
Aerator is dirty or not
seated properly.
Unscrew aerator with aerator wrench and
clean out debris.
Care & Maintenance
* To keep the product clean & shining, follow the steps below:
1. Rinse with clean water & dry with a soft cloth
2. Do not clean with soaps, acid, polish, abrasives or harsh cleaners
3. Do not use cloth with a coarse surface
4. Unscrew the aerator and clean when necessary
* This installation manual is subject to change without further notice.
Water does not shut off
completely
Cartridge may need to be
adjusted or replaced.
Remove the index. Loosen set screw with
hex wrench. Remove the handle. Unscrew
cap (by hand only). Tighten bonnet nut
with an adjustable wrench. Remove the
cartridge. Check for cracks.
There is leaking from the
sink drain at the base of
the sink
The sink has a rough or
irregular surface.
Apply additional silicone sealant to the
beveled side of the drain flange. Retighten
and test for leaks.
ACID
There is a low flow of water
The screen filter in the hose
connectors is dirty.
Turn off the water supply at water valve
and unscrew the hose connectors from
water supply lines. Clean the screen
in the water lines with hot water, removing
any debris or calcium build up.
PROBLEM CAUSE ACTION
9
FAUCET WARRANTY
Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. ("Kraus").
Kraus extends this warranty to the original purchaser for personal household use of the "Faucet" in its original location.
The warranty is non-transferable.
Kraus warrants the structure and finish of the product to be free from defects in material and workmanship under normal
usage for the lifetime of the product. The warranty commences from the initial date of purchase by the owner or trade
professional, from an authorized Kraus dealer, through the lifetime of the original owner or end-user.
Kraus warrants the mechanical components such as but not limited to sprayhead assembly (includes engine, aerators,
structure, restrictors, back flow preventers, sprayer hoses, braided supply line hoses which encompasses nylon, silicon
and stainless steel,etc) of the product to be free from defects in material and workmanship under normal usage for a
period of one (1) year. The warranty commences from the initial date of purchase by the owner or trade professional,
from an authorized Kraus dealer, through the one (1) year term of the original owner or end-user.
Kraus warrants the mechanical component (cartridge) of the product to be free from defects in material and
workmanship under normal usage for a period of five (5) years. The warranty commences from the initial date of
purchase by the owner or trade professional, from an authorized Kraus dealer, through the five (5) year term of the
original owner or end-user.
Any product reported to the authorized dealer or to Kraus as being defective within the warranty period will be repaired
or replaced with a product of equal value at the option of Kraus. This warranty extends to the original owner or end-user,
and is not transferable to a subsequent owner.
RESTRICTIONS
This warranty does not cover antediluvian, discontinued, or display products, whether such items are purchased at
discount outlets, unauthorized dealers, and/or sold on clearance.
This warranty does not cover instances of negligence, misuse, abuse, improper installation, carelessness, accident, hard
water or mineral deposits, exposure to corrosive materials, misapplication, damages caused by improper maintenance,
alteration of the product, or failure to follow care or installation instructions enclosed with your product. Avoid using
abrasive cleaners such as powders, bleach, ammonia, alcohol, or chlorine. Avoid using abrasive pads, steel wool, or wire
brushes, as these will damage and wear down the finish.
This warranty does not apply to Products that have not been installed or operated in accordance with instructions
supplied by Kraus and all applicable rules, regulations, and legislation pertaining to such installations.
This warranty does not apply unless the Kraus product is installed by a fully insured and licensed trade professional.
Kraus insists that such professionals have experience in the installation of bathroom and kitchen manufactured goods.
This warranty does not cover labor charges or costs of removal and reinstallation of said product. This warranty does not
allow recovery of incidental or consequential damages, such as loss of use, delay, property damage, or other
consequential damages, and Kraus accepts no liability for such damages.
This warranty does not cover Marine or Outdoor Installation.
Codes/Standards Applicable:
U
P
C
C
R
I
A
P
C
R
NSF/ANSI 372
LEAD FREE
ASME A112.18.1
1.2GPM 4.5L/min maximum
M
O
R
&
T
NSF/ANSI 61
10
Except as otherwise provided above, Kraus makes no warranties, expressed or implied, including warranties of
merchantability and fitness for a particular purpose, or compliance with any code.
Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK, and Puerto
Rico shipping charges may apply). International shipping fees are not included.
COMMERCIAL WARRANTY
Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and
business use.
All incidental or consequential damages are specifically excluded. No additional warranties, express or implied, are given,
including but not limited to any implied warranty of merchantability or fitness for a particular purpose.
Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long
an implied warranty lasts, so the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
KRAUS USA has the right to change, modify, and/or update the warranty policy at any time. For the latest, most up to
date comprehensive warranty, go to www.kraususa.com/warranty
If you are a homeowner please contact a Kraus Customer Service Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
Toll-free 800-775-0703
Customerservice@kraususa.com
If you are a plumbing contractor or trade professional please contact a Kraus Pro Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8955
Proservice@kraususa.com
If you are an Authorized Partner please contact a Partner Support Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8954
Partnersupport@kraususa.com
In requesting warranty service, please be ready to provide:
1. Proof of purchase.
2. A description of the problem.
Download the Kraus Care & Maintenance Guide at:
http://www.kraususa.com/maintenance
Register Your Kraus Product
Activate Your Warranty
Access Premium Customer Support
Get Product Information
REGISTER TODAY
http://www.kraususa.com/registration
R
www.kraususa.com
IMPORTANT
Loading...