INSTALLATION GUIDE
Arlo™ Single Lever Vessel Faucet
KVF-1200
www.kraususa.com I Toll Free: 1.800.775.0703 I © 2019 Kraus USA Inc. I REV. FEB 26, 2020
Congratulations on the purchase of your new
Kraus plumbing xture!
Please keep the box and packaging materials until your product is
completely installed. If you have any questions, require technical
assistance, or have any problems with your product:
DO NOT RETURN TO STORE
Please contact our Customer Service Team
1-800-775-0703 / customerservice@kraususa.com
Have the model number available, and retain a copy of your receipt
with purchase date for reference.
If for any reason this product does not meet your expectations,
please be sure to repack this product in the original box and
packaging material to avoid damage during transit.
1
1
Prior to Installation:
Make sure you have all necessary parts by checking the diagram and parts list. If
•
any part is missing or damaged, please contact Kraus Customer Service at 800-775-
0703 for a replacement
Turn off the hot and cold water lines at the angle stops and turn on the old faucet
•
to release any built-up pressure
•
Pre-drilled countertop hole size requirement: 1-3/8”(min)
• Max countertop thickness: 2 1/2”
Tools you will need:
Wrench Phillips Screwdriver
Pipe Tape
Silicone Sealant
(optional)
Safety Goggles
2
Diagram and Parts List
G
H
A
I
J
A. Faucet Body
B. Plastic Washer
C. Metal Washer
D. Nut & Screws
E.
Waterlines
F. Flange & Washer
E
F
G. Aerator
H. Aerator Key
I. Hex Wrench
B
C
D
J. Drain
3