Kraus KPF-2240CH User Manual

Replacement Parts

Keep this manual for ordering replacement parts.

10.

8.

9.

7.

16.

15.

17.1

17.2

Dear Valued Customer,

Kraus would like to take this opportunity to thank you for purchasing Kraus products. It is our sincere hope that you are completely satisfied with your new

12.

11.

6.

5.

4.

3.

1.

2.

13.

18.

14.

1 Handle Assembly 2 Index Button 3 Handle Adaptor 4 Trim Cap 5 Locking Nut 6 Ceramic Disc Cartridge 7 Pattern Clip 8 Hose Guide 9 Spout Adapter 10 Hand Spray W/ Check valve 11 Cover Plate & Putty Plate 12 Mounting Hardware Assembly 13 Spray Hose 14 Check Valve 15 Weight 16 Spray Hose

17.1 Spray Hose Cold

17.2 Spray Hose Hot 18 Wrench (H2.5 * 19 mm L * 53mmL)

purchase. We welcome any questions or comments you may have, and look forward to assisting you in the future.

Sincerely, Kraus Customer Service Department.

Single Control

Kitchen Faucet

Before Your Installation

Check to make sure you have the parts indicated below:

Tools You Will Need

Trouble - Shooting

If you've followed the instructions carefully and your faucet still does not work properly, take these corrective steps.

Problem

Leakage under the handle.

Water will not shut off completely.

Cause

Adjusting ring or cap has come loose.

Dirty or worn out plastic washer in the cartridge.

Action

Tighten the adjusting ring or cap.

Remove the handle and the cartridge to check if the ceramic dish is dirty or permanently damaged.

Faucet Installation Procedure

Shut off main water supply before installation.

Phillips screwdriver

Model

Adjustable wrench

Silicone Sealant

SAFETY TIPS

• Cover your drain to avoid losing parts.

• When installing flexible hose, Please notice: there should be no torsion or deformation ; do not fold into Shape V or L; do not use if there is any crack or deformation.

Pipe tape

Hex wrench

Groove joint plier

KPF-2240 CH

7SHZ[PJ:LHS*HW

3

Remove the plastic seal cover from the outlet port prior to pushing the hose adapter onto the same port, you will hear a "click" sound once they are joined.

Tighten the hose onto water supply.

5

4

Attach metal weight to hose to prevent hose from twisting and returns hose to proper position.

After installing faucet, remove pull-down spray and

6

turn on water to remove any left over debris. Re-assemble spout.

The fittings should be installed by a licensed plumber.

Remove preassembled mounting hardware

1

from faucet

For Faucet without cover plate: Install faucet

2.1

through center hole, and then attach mounting hardware assembly on mounting body. Tighten the two screws on lock nut.

MAINTENANCE

Your new faucet is designed for years of trouble-free performance. Keep it looking new by cleaning it periodically with a soft cloth. Avoid abrasive cleaners, steel wool and harsh chemicals as these will dull the finish and void your warranty.

2.2

For Faucet with cover plate: Attach cover plate & putty plate to the bottom of faucet. Apply plumber putty beneath the putty plate and install faucet through center hole. Attach mounting hardware assembly. Tighten the two screws on lock nut.

KRAUS” Brand Kitchen Faucets Limited Lifetime Warranty

KRAUS is proud to offer its customers the strongest, most durable ceramic cartridges in all solid brass Kitchen Faucets it manufactures. KRAUS guarantees all of our products to be free of defect in materials and craftsmanship. All KRAUS BRAND Kitchen Faucets carry a limited lifetime warranty from the original date of purchase.

If a product fails due to defect in material or craftsmanship during the warranty period, KRAUS will repair or replace the items at our sole discretion. Warranty does not apply when the item has been tampered with, misused, improperly installed, altered, or damaged due to abuse or accident. Proof of purchase (original sales receipt) must be provided to KRAUS for all warranty claims. Please contact one of our representatives if you need any additional details.

MAINTENANCE

Your new faucet is designed for years of trouble-free performance. Keep it looking new by cleaning it periodically with a soft cloth. Avoid abrasive cleaners, steel wool and harsh chemicals as these will dull the finish and void your warranty.

All KRAUS products must be installed by a licensed professional plumber or contractor to avoid any improper use or installation.

IN NO EVENT SHALL KRAUS BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES, INSTALLATION COST, LABOR, TRAVEL TIME, FREIGHT COSTS INCURRED, LOST PROFITS, OR CONTINGENT LIABILITIES.

KRAUS USA Inc. makes no representation that its products comply with any or all local building or plumbing codes. It is the consumer’s responsibility to determine local code compliance.

This warranty extends to the original purchaser and first consumer.

AB1953 Compliant

Kraus KPF-2240CH User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual