Kraus KP1TS33S2, KP1TS25S1, KP1TS25SX User Manual
INSTALLATION MANUAL
Pax™ Series Zero-Radius Stainless
Steel Topmount Kitchen Sinks
KP1TS25S-1
KP1TS33S-2
KP1TS33S-4
www.kraususa.com I Toll Free: 1.800.775.0703 I © 2017 Kraus USA Inc. I REV. June 28, 2017
Thank you for your purchase
We would like to take this opportunity to thank you for choosing Kraus.
We hope that you are completely satised with your purchase, and enjoy it for years
to come. If you have any questions, or require technical assistance, please contact
us at 800.775.0703 and one of our representatives will be happy to help.
For more information about Kraus products, please visit:
www.kraususa.com
In order to activate your warranty and get faster access to customer support, please
register your new Kraus product at:
www.kraususa.com/registration
Sincerely,
Kraus USA Customer Service
1
Prior to Installation:
Make sure that you have all necessary parts by checking the parts list. If any part is
•
missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a
replacement
• Inspect the sink prior to installation to make sure that it has not been damaged or
during shipping
• Use the cut-out template provided by Kraus
• Observe all plumbing and building codes according to your state requirements
For technical assistance or replacement parts, please contact Kraus
Customer Service and one of our representatives will be happy to help:
Toll-Free: 800-775-0703 or customerservice@kraususa.com
The step-by-step guidelines in the installation instructions are a general reference for installing
a Kraus sink. Should there be any discrepancies, Kraus cannot be held liable. It is recommended
to install all Kraus products by hiring a licensed professional.
2
Tools you will need:
Phillips screwdriver
Adjustable wrench
Phillips screwdriver
Hex wrench
Silicone Sealant
I
D
J
F
B
G
H
E
Safety Goggles
Drill
Putty KnifePhillips Screwdriver
Silicone Adhesive Jig Saw
Tape Measure
Pencil
Scissors Screwdriver
NOTE: Specialized tools may be necessary to install Kraus stainless steel topmount
sinks with countertop materials other than wood, marble, or granite
Parts List
• Cut-Out Template
• Mounting Hardware
• Bottom Grid
• Drain
3
Dimensions
33"
22"
18"
18"
9"
22"
Ø28
4"
4"
3-Ø38
Ø38
Ø28
31"
33"
22"
23"
25"
22"
18"
1 1/2”
Ø
18"
Ø28
4"
4"
3-Ø38
31"
33"
Ø
1 1/2”
Ø
Ø
1 1/2” 1 1/8”
18"
23"
25"
9"
KP1TS25S-1
25” x 22” x 9”
Min Cabinet Size: 27”
Drain Model #: ST-1
4" 4"
22"
18"
1 1/2”
1 1/8”
22"
18"
9"
KP1TS33S-2
33” x 22” x 9”
Min Cabinet Size: 36”
Drain Model #: ST-1
31"
33"
9"
KP1TS33S-4
33” x 22” x 9”
Min Cabinet Size: 36”
31"
33"
Drain Model #: ST-1
4
Loading...