Kraus KHU32261041SS Installation manual
INSTALLATION MANUAL
Oletto™ Single Lever Pull Out
Kitchen Faucet
KPF-2610
www.kraususa.com I toll free: 1.800.775.0703 I © 2014-2015 Kraus USA Inc. I REV. August 16, 2016
Thank you for your purchase
We would like to take this opportunity to thank you for choosing Kraus.
We hope that you are completely satised with your purchase, and enjoy it for years
to come. If you have any questions, or require technical assistance, please contact
us at 800.775.0703 and one of our representatives will be happy to help.
For more information about Kraus products, please visit:
www.kraususa.com
In order to activate your warranty and get faster access to customer support, please
register your new Kraus product at:
www.kraususa.com/registration
Sincerely,
Kraus USA Customer Service
For technical assistance or replacement parts, please contact Kraus
Customer Service and one of our representatives will be happy to help:
Toll-Free: 800-775-0703 or Customerservice@kraususa.com
1
Prior to Installation:
7/8”
19.7
º
(22mm)
8 5/16”
1 1/4-18UNF-2A
(21mm)
10 1/8”
(257mm)
1 3/8”
(35mm)
2
1A
D
Phillips screwdriver
Make sure you have all necessary parts by checking the diagram and parts list. If
•
any part is missing or damaged, please contact Kraus Customer Service at 800-
775-0703 for a replacement
• Turn o the hot and cold water supply at the angle stops and turn on the old
faucet to release any built up pressure. Remove existing faucet. Clean sink or
countertop to remove any debris, plumber’s putty, or silicone
• Place bucket under angle stops. Turn on to ush any debris prior to installing new
plumbing. Shut o angle stops
• Pre-drilled hole size requirement: 1-3/8” (min) – 1-1/2” (max)
• Max countertop thickness without deck plate: 1-1/2”
• Max countertop thickness with deck plate: 1”
• 1, 2, or 3 hole installation
Without deck plate:
1/16” (1mm) min.
1-1/2” (38 mm) max.
Ø 1-3/8” (35 mm) min.
Ø 1-1/2” (38 mm) max.
1/16” (1mm) min.
1” (25.4 mm) max.
Ø 1-3/8” (35 mm) min.
Ø 1-1/2” (38 mm) max.
Tools you will need:
Adjustable Wrench
With deck plate:
Safety Goggles Bucket Silicone Sealant
2
Adjustable wrench
Phillips screwdriver
Tools You Will Need
Hex wrench Silicone Sealant
Diagram and Parts List
A
B
F
J
C
I
D
G
H
E
A. Spray Head
B. Faucet Body
C. Deck & Putty Plate
D. Base
E. Spray Hose
F. Supply Hose
3
G. Hot & Cold Waterlines
H. Weight
I. Quick Connect
J. Hex Wrench Set
J1. 2mm
J2. 2.5mm
J3. 4mm
9/16-24UNEF
(3/8” Compression)
Check Value
1/16”~1-1/2” max
(1mm~38.1mm) max
1/16”~1” max
(1mm~25.4mm) max
5/16”
(8.5mm)
Ø2"
(Ø50mm)
10-1/4”
(258mm)
Faucet Dimensions
2-1/2"
(63mm)
10-3/8”
(262mm)
8-1/8"
(207mm)
10-1/4”
(258mm)
º
9
10-1/2”
9-3/4”
(266mm)
(247mm)
7-3/8
(187mm)
1/16”~1” max
1/16”~1-1/2” max
(1mm~38.1mm) max
(1mm~25.4mm) max
Ø2"
(Ø50mm)
(3/8” Compression)
Check Value
5/16”
(8.5mm)
9/16-24UNEF
4
Loading...