Kraus KHU3219263000CH Install

Download

Page 1

INSTALLATION GUIDE

Oletto™ Single Lever

Bar/Prep Faucet

KPF-2600

Page 2

Congratulations on the purchase of your new Kraus plumbing xture!

Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance, or have any problems with your product:

DO NOT RETURN TO STORE

Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com

Have the model number available, and retain a copy of your receipt with purchase date for reference.

If for any reason this product does not meet your expectations, please be sure to repack this product in the original box and packaging material to avoid damage during transit.

Page 3

3/8”

(10mm)

7/8”

19.7

(22mm)

8 5/16”

1 1/4-18UNF-2A

(21mm)

10 1/8”

(257mm)

1 3/8”

(35mm)

3 3/4”

(96mm)

Phillips screwdriver

Prior to Installation:

Make sure you have all necessary parts by checking the diagram and parts list. If

•

any part is missing or damaged, please contact Kraus Customer Service at 800-

775-0703 for a replacement

• Turn o the hot and cold water supply at the angle stops and turn on the old

faucet to release any built up pressure. Remove existing faucet. Clean sink or

countertop to remove any debris, plumber’s putty, or silicone

• Place bucket under angle stops. Turn on to ush any debris prior to installing new

plumbing. Shut o angle stops

• Pre-drilled hole size requirement: 1-3/8” (min) – 1-1/2” (max)

• Max countertop thickness: 1-1/2”

For technical assistance or replacement parts, please contact Kraus

Customer Service and one of our representatives will be happy to help:

Toll-Free: 800-775-0703 or Customerservice@kraususa.com

Tools you will need:

Adjustable Wrench

Safety Goggles Bucket Silicone Sealant

Page 4

Diagram and Parts List

A. Aerator

B. Faucet Body

C. Base

D. Hot & Cold Waterlines

E. Hex Wrench Set

E1. 2.5mm

E2. 4mm

F. Base Ring

Page 5

12 1/4"

(310.5mm)

(178mm)

4 1/8"

(105mm)

5 9/16"

(141mm)

27 5/16"

(694.5mm)

36Max

7 5/16"

(186mm)

2-9/16-24UNEF-2B

Faucet Dimensions

Page 6

Step 1: Install base

NOTE: The mark “FR↑NT” should parallel with face basin,align to front (Otherwise, the faucet will deflect)

Aligning shank with groove of washer.

Step 2: Install faucet

Half Moon Locking Nuts

Insert base (C) into base ring

(F) on sink or countertop with

“FR↑NT” facing forward. Tighten

screws on base (C) with 4mm

hex wrench (E) until base is

secure on base ring (F) on sink or

countertop

Installer Tip: Rotate the two

half-moon shaped locking

nuts inward before inserting

base (C) into base ring (F) on

sink or countertop

Insert hot & cold waterlines (D),

one by one, into large hole of base

(C). Align arrow on faucet body

(B) with arrow on base (C). Attach

faucet body (B) to base (C)

Note: “ ” on base should be in alignment with “ ” on faucet body.

Installer Tip: Please loosen

set screw from faucet body (B)

prior to securing to base (C)

Page 7

Step 3: Secure faucet

Hot

Cold

Step 3: Connect waterlines to main valve

Secure faucet body (B) by

tightening the set screw with

2.5mm hex wrench (E)

Thread hot & cold waterlines

(D) onto angle stops. Tighten

with adjustable wrench until

snug. Turn on the angle stops

and check for leaks (DO NOT

TURN FAUCET ON)

Installer Tip: Use two wrenches when securing waterlines to angle stops to prevent kinking, as shown in picture

Page 8

Step 4: Flush faucet

Trouble - Shooting

Remove aerator (A).

Turn faucet on for 1

minute to ush any

debris. Reconnect

aerator (A)

If you have followed the instructions carefully and your faucet still does not work

properly, take the following corrective steps:

PROBLEM CAUSE ACTION

Water will not shut off completely

Dripping from aerator Washer may be missing

Cartridge (5) may need to be adjusted or replaced

or not seated correctly

Remove index button (1A). Loosen set screw (1B) with 2.5mm hex wrench (12). Remove metal handle (2). Remove cartridge cover (3) by hand only. Remove locking nut (4) with an adjustable wrench. Remove ceramic disc cartridge (5). Check for cracks

Remove aerator (8). Make sure washer is present and seated correctly

Page 9

Hot Water

Cold Water

Push

Replacement Part List

1. A Index Button

B Set Screw

2. Metal Handle

3. Cartridge Cover

4. Locking Nut

5. Cartridge

6. Seal Kit

7. Insert

8. Aerator

9. Set Screw

10. Base Ring

11. Base

12. Hex Wrench 2.5mm

13. Hex Wrench 4mm

Care & Maintenance

*To keep the product clean & shining, follow the steps below:

1. Rinse with clean water & dry with a soft cloth

2. Do not clean with soaps, acid, polish, abrasives, or harsh cleaners

3. Do not use cloth with a coarse surface

4. Unscrew the aerator and clean when necessary

*This installation manual is subject to change without further notice.

Page 10

Codes / Standards Applicable:

GREEN

NSF/ANSI Standard 61 certied by IAPMO

NSF/ANSI Standard 372 certied by IAPMO

Water Eciency

LEAD FREE

Meets A112.18.1

1.8gpm 6.8L/min maximum

FAUCET WARRANTY*

Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”).

Kraus extends this warranty to the original purchaser for personal household use of the “Faucet” in its original location. The warranty is non-transferable.

Kraus warrants the structure and nish of the product to be free from defects in material and workmanship under normal usage for the lifetime of the product. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the lifetime of the original owner or end-user.

Kraus warrants the mechanical components such as but not limited to sprayhead assembly (includes engine, aerators , structure, restrictors, back ow preventers, sprayer hoses, braided supply line hoses which encompasses nylon, silicon and stainless steel, etc) of the product to be free from defects in material and workmanship under normal usage for a period of one (1) year. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the one (1) year term of the original owner or end-user.

Kraus warrants the mechanical component (cartridge) of the product to be free from defects in material and workmanship under normal usage for a period of ve (5) years. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the ve (5) year term of the original owner or end-user.

Any product reported to the authorized dealer or to Kraus as being defective within the warranty period will be repaired or replaced with a product of equal value at the option of Kraus. This warranty extends to the original owner or end-user, and is not transferable to a subsequent owner.

RESTRICTIONS

This warranty does not cover antediluvian, discontinued, or display products, whether such items are purchased at discount outlets, unauthorized dealers, and/or sold on clearance.

This warranty does not cover instances of negligence, misuse, abuse, improper installation, carelessness, accident, hard water or mineral deposits, exposure to corrosive materials, misapplication, damages caused by improper maintenance, alteration of the product, or failure to follow care or installation instructions enclosed with your product. Avoid using abrasive cleaners such as powders, bleach, ammonia, alcohol, or chlorine. Avoid using abrasive pads, steel wool, or wire brushes, as these will damage and wear down the nish.

This warranty does not apply to Products that have not been installed or operated in accordance with instructions supplied by Kraus and all applicable rules, regulations, and legislation pertaining to such installations.

This warranty does not apply unless the Kraus product is installed by a fully insured and licensed trade professional. Kraus insists that such professionals have experience in the installation of bathroom and kitchen manufactured goods.

This warranty does not cover labor charges or costs of removal and reinstallation of said product. This warranty does not allow recovery of incidental or consequential damages, such as loss of use, delay, property damage, or other consequential damages, and Kraus accepts no liability for such damages.

This warranty does not cover Marine or Outdoor Installation.

Except as otherwise provided above, Kraus makes no warranties, expressed or implied, including warranties of merchantability and tness for a particular purpose, or compliance with any code.

Shipping charges will be covered for the rst (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included.

Page 11

COMMERCIAL WARRANTY*

Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use.

All incidental or consequential damages are specically excluded. No additional warranties, express or implied, are given, including but not limited to any implied warranty of merchantability or tness for a particular purpose.

Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.

If you are a homeowner please contact a Kraus Customer Service Representative at:

Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050 Toll-free 800-775-0703 Customerservice@kraususa.com

If you are a plumbing contractor or trade professional please contact a Kraus Pro Representative at:

Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050 516-801-8955 Proservice@kraususa.com

If you are an Authorized Partner please contact a Partner Support Representative at:

Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050 516-801-8954 Partnersupport@kraususa.com

In requesting warranty service, please be ready to provide:

1. Proof of purchase.

2. A description of the problem.

Download the Kraus Care & Maintenance Guide at:

http://www.kraususa.com/maintenance

*This warranty gives you specic legal rights, and you may also have other rights which vary from state to state. KRAUS USA has the right to change, modify, and/or update the warranty policy at any time. For the latest, most up to date comprehensive warranty, go to www.kraususa.com/warranty

Page 12

IMPORTANT

• Activate Your Warranty

• Access Premium Customer Support

• Get Product Information

www.kraususa.com/register

or visit our website and click on Register Product

www.kraususa.com