Kraus KPF1610SSCH, KHU24L161053SSCH, KHU10032161053SSCH, KPF1610SS, KPF1610SSMB User Manual

...

Download

Page 1

INSTALLATION MANUAL

Bolden™ Single Handle

Commercial Kitchen Faucet

KPF-1610

Page 2

Thank you for your purchase

We would like to take this opportunity to thank you for choosing Kraus. We hope that you are completely satised with your purchase, and enjoy it for years to come. If you have any questions, or require technical assistance, please contact us at 800.775.0703 and one of our representatives will be happy to help.

For more information about Kraus products, please visit:

www.kraususa.com

In order to activate your warranty and get faster access to customer support, please register your new Kraus product at:

www.kraususa.com/registration

Sincerely,

Kraus USA Customer Service

Page 3

Prior to Installation:

• Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement

• Turn o the cold and hot water at the angle stops and turn on the old faucet to release any built up pressure

• Flush angle stops to release any debris prior to installation

• Pre-drilled hole size requirement: 1-3/8” (min) – 1-1/2” (max)

• Max countertop thickness: 1-3/8

• 1, 2, or 3 hole installation

For technical assistance or replacement parts, please contact Kraus

Customer Service and one of our representatives will be happy to help:

Toll-Free: 800-775-0703 or Customerservice@kraususa.com

Page 4

Diagram and Parts List

Page 5

Diagram and Parts List

1. Spray Head

2. Faucet Body

3. Mounting Hardware A. Rubber Washer B. Metal Washer C. Mounting Nut D. Mounting Screws

4. Supply Hose

5. Hot & Cold Waterlines A. Hot B. Cold

6. Hose

7. Washer

8. Weight

9. Hex Wrench

Tools you will need

Adjustable Wrench

Silicone Sealant

(optional)

Phillips Screwdriver

Safety Goggles

Page 6

Faucet Installation Procedure

Installer Tip:

Shut o main water supply before installing new faucet

Page 7

Step 1: Remove mounting hardware

Step1: Remove mounting hardware

Step2: Install faucet and mounting hardware

Replacement Parts

Remove the mounting

screws (3D), mounting nut

(3C), metal (3B) and rubber

washer (3A) from the

mounting pipe

3A 3B 3C

Step 2: Install faucet and mounting hardware

Insert faucet body (2) into

hole in countertop. Install

mounting hardware (3A, B,

C & D) from underneath the

countertop

3A 3B 3C

Page 8

Step1: Remove mounting hardware

Step2: Install faucet and mounting hardware

Step4: Attach spray hose and counterweight

Step5: Connect angle valve

Step 7: Flush spray hose

Step 3: Secure mounting hardware

Adjust direction of faucet

body (2) so that handle is on

right side of faucet. Tighten

mounting nut (3C) until snug.

Tighten mounting screws

(3D) with Phillips screwdriver

until snug

Step 4: Attach spray hose and counterweight

Connect spray hose (6)

to supply hose (4). Install

weight (8) on lowest

vertical point on spray

hose (6)

Page 9

Step 5: Connect waterlines

Replacement Parts

Step 7: Flush spray hose

Connect waterlines(5A&B)

to angle stops. Tighten

both ends of waterlines

with a wrench until snug.

Turn on hot and cold angle

stops and check for leaks

Step 6: Flush spray hose

Step 7: Check for leaks

Remove spray head (1) from

spray hose (6). Hold tip of

spray hose (6). Turn faucet on

and let the water run for 60

seconds to ush any debris

NOTE: Please make sure washer (7) is installed attaching spray head to hose

Check for leaks at the

connections. Retighten if

necessary

Page 10

Hot Water

Cold Water

Push

Replacement Parts

8 9

17 18 19

11 12

131415

Replacement Parts

1. Spray Head

2. Check Valve

3. Hose Guide

4. Sprayer Holder

5. Spring

6. Set Screw

7. Sleeve

8. Cap

9. Set Screw

10. Handle

11. Handle Set Screw

12. Handle Button

13. Cartridge Cover

14. Locking Nut

15. Cartridge

16. Base O-Ring

17. Rubber Washer

18. Metal Washer

19. Mounting Nut

20. Mounting Screws

21. Protective Sleeve

22. Washer

23. Hose

24. Check Valve

25. Weight

26. Hot & Cold Waterlines

27. Filter Washer

28. Supply Hose

29. Hex Wrench

Care & Maintenance

*To keep the product clean & shining, follow the steps below:

1. Rinse with clean water & dry with a soft cloth

2. Do not clean with soaps, acid, polish, abrasives, or harsh cleaners

3. Do not use cloth with a coarse surface

4. Unscrew the aerator and clean when necessary

*This installation manual is subject to change without further notice.

Page 11

Trouble - Shooting

If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps:

PROBLEM CAUSE ACTION

Leakage under faucet handle

Water does not shut off completely

Leaking between spray head and the hose

Locking nut has come loose or cartridge needs to be reseated

Cartridge may need to be adjusted or replaced

Spray head may be loose or washer is not seated correctly in the hose connection

Remove button located at top of handle. Loosen set screw with hex wrench. Remove handle and unscrew cartridge cover by hand. Tighten locking nut with an adjustable wrench

Remove button located at top of handle. Loosen set screw with hex wrench. Remove handle and unscrew cartridge cover by hand. Unscrew locking nut with an adjustable wrench. Remove ceramic disc cartridge. Check for cracks, and if O-ring is seated correctly. Reseat cartridge

Tighten spray head by hand until snug. Make sure washer is seated correctly

Hose does not retract Weight may be

installed incorrectly

Low flow Aerator may be clogged Unscrew aerator with

Readjust weight on hose

aerator key. Hold tip of spray head and turn on water to flush debris

Page 12

Maintenance - Cartridge Replacement

Step 1: Remove the handle

button from the handle. Loosen

the set screw with a hex wrench.

Remove the handle and unscrew

cartridge cover by hand

Step 2: Unscrew the locking

nut with an adjustable wrench.

Remove ceramic disc cartridge

Step 3: Place the new cartridge

in the handle seat. Secure the

cartridge with the locking nut

and assemble the handle

Page 13

Codes/Standards Applicable:

GREEN

NSF/ANSI Standard 61 certied by IAPMO

NSF/ANSI Standard 372 certied by IAPMO

Water Eciency

LEAD FREE

Meets ASME A112.18.1M/A112.18.1

1.75GPM 6.6L/min maximum

FAUCET WARRANTY

Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”). Kraus extends this warranty to the original purchaser for personal household use of the “Faucet” in its original location. The warranty is non-transferable.

Kraus warrants the structure and nish of the product to be free from defects in material and workmanship under normal usage for the lifetime of the product. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the lifetime of the original owner or end-user.

Kraus warrants the mechanical component (sprayhead assembly) of the product to be free from defects in material and workmanship under normal usage for a period of one (1) year. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the one (1) year term of the original owner or end-user.

Kraus warrants the mechanical component (cartridge) of the product to be free from defects in material and workmanship under normal usage for a period of ve (5) years. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the ve (5) year term of the original owner or end-user.

Any product reported to the authorized dealer or to Kraus as being defective within the warranty Kraus. This warranty

period will be repaired or replaced with a product of equal value at the option of

extends to the original owner or end-user, and is not transferable to a

subsequent owner.

RESTRICTIONS

This warranty does not cover antediluvian, discontinued, or display products, whether such items are purchased at discount outlets, unauthorized dealers, and/or sold on clearance. This warranty does not cover instances of negligence, misuse, abuse, improper installation, carelessness, accident, hard water or mineral deposits, exposure to corrosive materials, misapplication, damages caused by improper maintenance, alteration of the product, or failure to follow care or installation instructions enclosed with your product. Avoid using abrasive cleaners such as powders, bleach, ammonia, alcohol, or chlorine. Avoid using abrasive pads, steel wool, or wire brushes, as these will damage and wear down the nish. This warranty does not apply to Products that have not been installed or operated in accordance with instructions supplied by Kraus and all applicable rules, regulations, and legislation pertaining to such installations.

This warranty does not apply unless the Kraus product is installed by a fully insured and licensed trade professional. Kraus insists that such professionals have experience in the installation of bathroom and kitchen manufactured goods.

Page 14

This warranty does not cover labor charges or costs of removal and reinstallation of said product. This warranty does not allow recovery of incidental or consequential damages, such as loss of use, delay, property damage, or other consequential damages, and Kraus accepts no liability for

such damages.

This warranty does not cover Marine or Outdoor Installation. Except as otherwise provided above, Kraus makes no warranties, expressed or implied, including warranties of merchantability and tness for a particular purpose, or compliance with any code. Shipping charges will be covered for the rst (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included.

COMMERCIAL WARRANTY

Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use.

All incidental or consequential damages are specically excluded. No additional warranties, express or implied, are given, including but not limited to any implied warranty of merchantability or tness for a particular purpose.

Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.

This warranty gives you specic legal rights, and you may also have other rights which vary from state to state.

If you are a homeowner please contact a Kraus Customer Service Representative at:

Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050 Toll-free 800-775-0703 Customerservice@kraususa.com

If you are a plumbing contractor or trade professional please contact a Kraus Pro Representative at:

Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050 516-801-8955 Proservice@kraususa.com

If you are an Authorized Partner please contact a Partner Support Representative at:

Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050 516-801-8954 Partnersupport@kraususa.com

Page 15

In requesting warranty service, please be ready to provide:

1. Proof of purchase.

2. A description of the problem.

Download the Kraus Care & Maintenance Guide at:

http://www.kraususa.com/maintenance

www.kraususa.com

Page 16

Receive Proof of Ownership

Access Customer Care & Installation Help

Get Exclusive Kraus Oers & Promotions

Scan to Register Online

or visit http://www.kraususa.com/registration

We’re always looking for ways to improve.

Please take a moment to share your experience.

Visit http://www.kraususa.com/review to let us know what you think

about your new Kraus product.

1.800.775.0703 / www.kraususa.com / customerservice@kraususa.com

Like & Follow KrausUSA

Download the Kraus Care & Maintenance Guide at:

http://www.kraususa.com/maintenance

www.kraususa.com