Kraus KD1UD33B, KD1US25B, KD1US33B User Manual

Installation Instructions

KD1US17B, KD1US25B, KD1US33B and KD1UD33B

Kraus Undermount Stainless Steel Sink Installation Instructions

For the Attention of the Customer and the Installer:

1. For best results, Kraus recommends that the solid surface countertop cut-out should only be prepared by

a professional fabricator, and undermount sinks should only be installed by a professional installer.

2. The enclosed paper template represents Kraus recommended countertop cut-out specication and sink

mounting style.

3. Sink installation and countertop cut-out choices are not limited to Kraus specications. Installer and

customer must discuss these options, and reach an agreement on alternate countertop cut-out dimensions

and sink installation methods prior to preparation of the countertop. Kraus will not be held responsible

for alternate choices of sink installation and countertop cut-out.

4. In addition to the Kraus paper template, electronic (.dxf) les for countertop cut-outs are available on the

Kraus website www.kraususa.com

5. Sink mounting requirements will vary according to countertop selection. Hardware for mounting the sink

to the countertop is not included, and should be specied by the countertop fabricator for the specic

countertop selection.

6. Sink may have sharp edges, please use caution when handling.

7. Inspect the sink unit prior to installation to conrm acceptance. Do not install a damaged unit.

8. Kraus USA is not responsible for any damage to sink or countertop incurred during installation.

9. Please follow all local plumbing and building codes.

KRAUS CUSTOMER SERVICE

Toll-free: 1.800.775.0703

Phone: [phone]

Email: [e-mail]

Hours: 9:00am to 8:00pm (EST) Monday thru Friday

INSTALLUS 1 May 2017

KD1US17B, KD1US25B, KD1US33B and KD1UD33B

Please note Kraus recommended sink mounting specications A and B:

KRAUS RECOMMENDED

SPECIFICATION A: 1/4” REVEAL

Installation Instructions

KRAUS RECOMMENDED

SPECIFICATION B: 1/8” OVERHANG

OPTIONAL CHOICE AT DISCRETION OF CUSTOMER

FLUSH FIT INSTALLATION

Flush t installation is NOT recommended by Kraus.
Exposure of silicone joint is not considered aesthetically acceptable.
Precise match of sink and countertop cut-out is extremely dicult.

www.kraususa.com

2

INSTALLUS 1 May 2017