Kraus KCV200GWH20, KCV200GBL20, KCV200GBE20, KCV200GGR20, KCV203GWH20 Installation Manual

POP-UP DRAIN

PU-20

Thank You

For Purchasing Kraus

We would like to take this opportunity to thank
you for your business with Kraus USA. It is our
sincere hope that you are completely satisfied
with your experience. We welcome any
questions or comments you may have,
and will be glad to assist you in the future.

For more information about Kraus products,
please visit our website at:

www.kraususa.com

Please register your new Kraus product at the
following web address in order to activate the
warranty and receive the full benefit of customer
support:

www.kraususa.com/registration

Sincerely,

Kraus Customer Service

Prior to Installation:

Make sure you have all necessary parts by
checking the diagram and parts list.

If any part is missing or damaged, please contact
Kraus Customer Service at 800-775-0703 for
a replacement.

TROUBLE - SHOOTING

If you have followed the instructions carefully
and your faucet still does not work properly, take
the following corrective steps

KRAUS LIFETIME LIMITED WARRANTY

Kraus products are manufactured and tested to
the highest quality standards by Kraus USA Inc.
("Kraus").

Kraus extends this warranty to the original
purchaser for personal household use of the
"Bathroom Accessories" in their original
location. The warranty is non-transferable.

Kraus warrants the structure and finish of the
product (Bathroom Accessories) to be free from
defects in material and workmanship under normal
usage for a period of one (1) year. The warranty
commences from the initial date of purchase by
the owner or trade professional, from an
authorized Kraus dealer, through the lifetime of
the original owner or end-user.

Any product reported to the authorized dealer or
to Kraus as being defective within the warranty
period will be repaired or replaced with a product
of equal value at the option of Kraus. This
warranty extends to the original owner or
end-user, and is not transferable to a subsequent
owner.

RESTRICTIONS

This warranty does not cover antediluvian,
discontinued, or display products, whether such
items are purchased at discount outlets,
unauthorized dealers, and/or sold
on clearance.

This warranty does not cover instances of
negligence, misuse, abuse, improper installation,
carelessness, accident, hard water or mineral
deposits, exposure to corrosive materials,
misapplication, damages caused by improper
maintenance, alteration of the product, or failure
to follow care or installation instructions enclosed
with your product. Avoid using abrasive cleaners
such as powders, bleach, ammonia, alcohol, or

chlorine. Avoid using abrasive pads, steel wool, or
wire brushes, as these will damage and wear
down the finish.

This warranty does not apply to Products that
have not been installed or operated
in accordance with instructions supplied
by Kraus and all applicable rules,
regulations, and legislation pertaining
to such installations.

This warranty does not apply unless the Kraus
product is installed by a fully insured and licensed
trade professional. Kraus insists that such
professionals have experience
in the installation of bathroom and kitchen
manufactured goods.

This warranty does not cover labor charges or
costs of removal and reinstallation of said product.
This warranty does not allow recovery of incidental
or consequential damages such as loss of use,
delay, property damage, or other consequential
damages, and Kraus accepts no liability for such
damages.

This warranty does not cover Marine or Outdoor
Installation.

Except as otherwise provided above, Kraus
makes no warranties, expressed or implied,
including warranties of merchantability and fitness
for a particular purpose, or compliance with any
code.

Shipping charges will be covered for the first (1)
year of the warranted replacement part or product
(HI, AK, and Puerto Rico shipping charges may
apply). International shipping fees are not
included.

COMMERCIAL WARRANTY

Kraus extends the above warranty for a period of
one (1) year to purchasers of products for
industrial, commercial and business use.

All incidental or consequential damages are
specifically excluded. No additional warranties,
express or implied are given, including but not
limited to, any implied warranty of merchantability
or fitness for a particular purpose.

Some states do not allow the exclusion
or limitation of incidental or consequential
damages, or limitations on how long an implied
warranty lasts, so the above limitations or
exclusions may not apply
to you.

This warranty gives you specific legal rights, and
you may also have other rights which vary from
state to state.

If you are a homeowner please contact Kraus
Customer Service Representative at:

Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
Toll-free 800-775-0703
[e-mail]

If you are a plumbing contractor or trade
professional please contact a Kraus Pro
Representative at:

Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8955
[e-mail]

If you are an Authorized Partner please contact
a Partner Support Representative at:

Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8954
[e-mail]

In requesting warranty service, please be ready to
provide:

1. Proof of purchase.

2. A description of the problem.

Drain is
leaking

Washers
may be
compromised
or installed
incorrectly

Check washers
to make
sure they
are installed
correctly and
not cracked

PROBLEM CAUSE ACTION

PU-20 DIAGRAM AND PARTS LISTS

STEP 1

Remove connector (h), tail pipe (g), mounting
nut (e), plastic washer (d) and concave washer
(c) from drain body (a).

STEP 3

Tighten mounting nut (e) with adjustable
wrench until snug. Thread connector (h) with
tailpipe (g) attached, onto drain body (a) and
hand-tighten.

STEP 2

Install drain body (a), with rubber washer
(b) attached, into the drain hole. From
underneath, attach concave washer (c) (narrow
end up), plastic washer (d) and mounting nut

(e) to drain body (a).

STEP 4

Connect tailpipe (g) to p-trap.

DIMENSIONS

REPLACEMENT PART LIST

Installer Tip: Make sure tailpipe washer (f)

is installed in tailpipe

CARE & MAINTENANCE

* To keep the product clean & shining, follow

the steps below:

1. Rinse with clean water & dry with a soft cloth.

2. Do not clean with soaps, acid, polish,
abrasives or harsh cleaners.

3. Do not use cloth with a coarse surface.

*This installation manual is subject to change without notice

a. Drain Body

b. Thin Gasket

c. Concave Gasket

d. Plastic Washer

e. Nut

f. Gasket

g. Tailpiece

h. Nut

a

b

c

d

e

f

g

h

1. Drain Cap

2. Gasket

3. Drain Body

4. Thin Gasket

5. Concave Gasket

6. Plastic Washer

7. Nut

8. Gasket

9. Tailpiece

10. Nut

1

2

3

4

5

6

7

8

9

10

a

b

c

d

e

f

g

h

Ø 2 3/4"
(70mm)

Ø 2 3/8"

(59mm)

Ø 1 5/8"
(41 mm)

4"

(100mm)

3 1/2"

(90mm)

Ø 1 1/4"
(32 mm)

U

P

C

C

R

h

e

f

g

a

b

c

d

e

g