Kraus KHU10032165041CH, KBU22E165042CH, KHU32165041CH, KBU14E165042CH, KHF20030165041CH User Manual

...

Download

Page 1

INSTALLATION GUIDE

Nola™ Single Lever Commercial

Style Kitchen Faucet

KPF-1650

Page 2

Congratulations on the purchase of your new Kraus plumbing xture!

Please keep teh box and packaging materials until your product is completely installed. If you have any questions, require technical assistance, or have any problems with your product:

DO NOT RETURN TO STORE

Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com

Have the model number available, and retain a copy of your receipt with purchase date for reference.

If for any reason this product does not meet your expectations, please be sure to repack this product in the original box and packaging material to avoid damage during transit.

Page 3

6 5/8”

5 4/5”

3/8”

(10mm)

7/8”

19.7

(22mm)

8 5/16”

1 1/4-18UNF-2A

(21mm)

10 1/8”

(257mm)

1 3/8”

(35mm)

3 3/4”

(168mm)

(147.3mm)

(96mm)

Prior to Installation:

• Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement

• Turn o the hot and cold water supply at the angle stops and turn on the old faucet to release any built up pressure. Remove existing faucet. Clean sink or countertop to remove any debris, plumber’s putty, or silicone

• Place bucket under angle stops. Turn on to ush any debris prior to installing new plumbing. Shut o angle stops

• Pre-drilled hole size requirement: 1-3/8”

• Max countertop thickness without deck plate: 1-3/8”

• 1, 2, or 3 hole installation

Tools you will need

Adjustable Wrench

Bucket

Phillips Screwdriver

Safety Goggles

Page 4

Diagram and Parts List

A. Spray Head

B. Faucet Body

C. Mounting Hardware

C1. Rubber & Metal Washer

C2. Mounting Nut

C3. Mounting Screw

D. Metal Base Ring

B D

E. Hot & Cold Waterlines

F. Aerator Key

G. Faucet Extender (used for top

mount sinks only)

H. 2.5 mm Hex Wrench

I. Deck Plate Assembly

Page 5

Faucet Dimensions

360

26 3/16”

26.2” (665mm)

7 3/16”

7.2” (183mm)

8 11/16”

8.66”

(220mm)

Ø54

Ø35

35MAX

Ø35

Page 6

Step 1: Remove mounting hardware

Remove mounting hardware

Step 2: Install faucet and mounting hardware

Insert faucet body (B) into

hole in countertop or sink.

Install mounting hardware

countertop

Note: Deck plate

assembly (I) can be used

to cover preexisting holes

Installer Tip: Please make

sure metal base ring (D) is

attached to faucet body

(B) prior to installation

Page 7

Step 3: Secure mounting hardware

Adjust the direction of faucet

body (B). Tighten mounting

nut (C2) until snug. Tighten

mounting screws (C3) to nut

with a Phillips screwdriver

until snug

Step 4: Connect waterlines

Connect waterlines (E) to

copper lines and angle

stops. Tighten both ends of

waterlines with an adjustable

wrench until snug. Turn on

angle stops and check for leaks

(DO NOT TURN FAUCET ON)

Page 8

Step 5: Flush spray hose

Remove spray head (A) from hose. Hold tip of hose. Turn faucet on for 60

seconds to ush any debris

Installer Tip: Please make sure washer is installed prior to attaching spray

head to hose

Page 9

Step 6: Check for leaks

Check for leaks at the connections

Page 10

Replacement Parts

14 15

1. A. Spray Head

B. Check Valve

2. Washer

3. Spray Hose & Spring

4. Pivot Ring

5. Check Valve Connector

6. Set Screw

7. Cover Button

8. Set Screw

9. Metal Handle

10. Cartridge Cover

11. Locking Nut

12. Cartridge

13. Metal Base Ring

14. Rubber & Metal Washer

15. Mounting Nut

16. Mounting Screws

17. Faucet Extender

18. Aerator Key

19. 2.5 mm Hex Wrench

20. Hot & Cold Waterlines

21. Deck Plate Assembly

Care & Maintenance

*To keep the product clean & shining, follow the steps below:

1. Rinse with clean water & dry with a soft cloth

2. Do not clean with soaps, acid, polish, abrasives, or harsh cleaners

3. Do not use cloth with a coarse surface

4. Unscrew the aerator and clean when necessary

*This installation manual is subject to change without further notice.

Page 11

Trouble - Shooting

If you have followed the instructions carefully and your faucet still does not work

properly, take the following corrective steps:

PROBLEM CAUSE ACTION

Leaking from faucet handle

Water does not shut off completely

Leaking between spray head and hose

Low flow Check valve

Locking nut (11) may have come loose or cartridge (12) may need to be reseated

Cartridge (12) may need to be adjusted or replaced

Spray head (1A) may be loose or washer (2) may not be seated correctly in the hose connection

connector (5) may be clogged with debris

Remove cover button (7). Loosen set screw (8) with 2.5 mm hex wrench (18). Remove handle (9). Unscrew cartridge cover (10) by hand. Tighten locking nut (11) with an adjustable wrench

Remove cover button (7). Loosen set screw (8) with 2.5 mm hex wrench (18). Remove handle (9). Unscrew cartridge cover (10) by hand. Unscrew locking nut (11) with an adjustable wrench. Remove cartridge (12). Check for cracks, and if O-ring is seated correctly. Reseat cartridge (12)

Tighten spray head (1A) by hand until snug. Make sure washer (2) is seated correctly

Loosen set screw (6). Remove spray hose & spring (3). Unscrew check valve connector (5) located at the bottom of spray hose & spring (3). Soak in 50/50 solution of warm water and vinegar for 5 minutes. Reinstall check valve connector (5) and spray hose & spring (3)

Page 12

Maintenance - Cartridge Replacement

Step 1: Remove button

located at the top of the

handle. Loosen the set

screw with a hex wrench.

Remove the handle and

unscrew cartridge cover by

hand

Step 2: Unscrew the

locking nut with an

adjustable wrench. Remove

ceramic disc cartridge

Step 3: Place the new

cartridge in the handle

seat. Secure the cartridge

with the locking nut and

assemble the handle

Page 13

Codes / Standards Applicable:

GREEN

NSF/ANSI Standard 61 certied by IAPMO

NSF/ANSI Standard 372 certied by IAPMO

Water Eciency

LEAD FREE

Meets ASME A112.18.1M/A112.18.1

1.75gpm 6.6L/min maximum

FAUCET WARRANTY

Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”). Kraus extends this warranty to the original purchaser for personal household use of the “Faucet” in its original location. The warranty is non-transferable.

Kraus warrants the structure and nish of the product to be free from defects in material and workmanship under normal usage for the lifetime of the product. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the lifetime of the original owner or end-user.

Kraus warrants the mechanical component (sprayhead assembly) of the product to be free from defects in material and workmanship under normal usage for a period of one (1) year. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the one (1) year term of the original owner or end-user.

Kraus warrants the mechanical component (cartridge) of the product to be free from defects in material and workmanship under normal usage for a period of ve (5) years. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the ve (5) year term of the original owner or end-user.

Any product reported to the authorized dealer or to Kraus as being defective within the warranty or replaced with a product of equal value at the option of Kraus. This warranty

extends to the original owner or

period will be repaired

end-user, and is not transferable to a subsequent owner.

RESTRICTIONS

This warranty does not cover antediluvian, discontinued, or display products, whether such items are purchased at discount outlets, unauthorized dealers, and/or sold on clearance.

This warranty does not cover instances of negligence, misuse, abuse, improper installation, carelessness, accident, hard water or mineral deposits, exposure to corrosive materials, misapplication, damages caused by improper maintenance, alteration of the product, or failure to follow care or installation instructions enclosed with your product. Avoid using abrasive cleaners such as powders, bleach, ammonia, alcohol, or wire brushes, as these will damage and wear down the nish.

This warranty does not apply to Products that have not been installed or operated in accordance with instructions supplied by Kraus and all applicable rules, regulations, and legiswlation pertaining to such installations.

This warranty does not apply unless the Kraus product is installed by a fully insured and licensed trade professional. Kraus insists that such professionals have experience in the installation of bathroom and kitchen manufactured goods

This warranty does not cover labor charges or costs of removal and reinstallation of said product. This warranty does not allow recovery of incidental or consequential damages, such as loss of use, delay, property damage, or other consequential damages, and Kraus accepts no liability for such damages.

This warranty does not cover Marine or Outdoor Installation.

Except as otherwise provided above, Kraus makes no warranties, expressed or implied, including warranties of

chlorine. Avoid using abrasive pads, steel wool, or

Page 14

merchantability and tness for a particular purpose, or compliance with any code. Shipping charges will be covered for the rst (1) year of the warranted replacement part or product (HI, AK, and Puerto

Rico shipping charges may apply). International shipping fees are not included.

COMMERCIAL WARRANTY

Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use.

All incidental or consequential damages are specically excluded. No additional warranties, express or implied, are given, including but not limited to any implied warranty of merchantability or tness for a particular purpose.

Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.

This warranty gives you specic legal rights, and you may also have other rights which vary from state to state.

If you are a homeowner please contact a Kraus Customer Service Representative at:

Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050 Toll-free 800-775-0703 Customerservice@kraususa.com

If you are a plumbing contractor or trade professional please contact a Kraus Pro Representative at:

Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050 516-801-8955 Proservice@kraususa.com

If you are an Authorized Partner please contact a Partner Support Representative at:

Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050 516-801-8954 Partnersupport@kraususa.com

In requesting warranty service, please be ready to provide:

1. Proof of purchase.

2. A description of the problem.

Download the Kraus Care & Maintenance Guide at:

http://www.kraususa.com/maintenance

Page 15

Page 16

IMPORTANT

Activate Your Warranty

Access Premium Customer Support

Get Product Information

http://www.kraususa.com/registration

www.kraususa.com