Kraus FUS1821CHWH, FUS1821CH Installation manual
INSTALLATION GUIDE
Seda™ Single Lever Basin Faucet
FUS-1821
www.kraususa.com I Toll Free: 1.800.775.0703 I © 2017 Kraus USA Inc. I REV. October 25, 2017
Congratulations on the purchase of your new
Kraus plumbing xture!
Please keep the box and packaging materials until your product is
completely installed. If you have any questions, require technical
assistance, or have any problems with your product:
DO NOT RETURN TO STORE
Please contact our Customer Service Team
1-800-775-0703 / customerservice@kraususa.com
Have the model number available, and retain a copy of your receipt
with purchase date for reference.
If for any reason this product does not meet your expectations,
please be sure to repack this product in the original box and
packaging material to avoid damage during transit.
2
7/8”
19.7
º
(22mm)
8 5/16”
1 1/4-18UNF-2A
(21mm)
10 1/8”
(257mm)
1 3/8”
(35mm)
Prior to Installation:
Make sure you have all necessary parts by checking the diagram and parts list. If
•
any part is missing or damaged, please contact Kraus Customer Service at 800-
775-0703 for a replacement
• Turn o the hot and cold water supply at the angle stops and turn on the old
faucet to release any built up pressure. Remove existing faucet. Clean sink or
countertop to remove any debris, plumber’s putty, or silicone
• Place bucket under angle stops. Turn on angle stops to ush any debris prior to
installing new plumbing. Shut o angle stops
• Pre-drilled hole size requirement: 1 3/8” (min)
• Max countertop thickness: 1 3/8”
For technical assistance or replacement parts, please contact Kraus
Customer Service and one of our representatives will be happy to help:
Toll-Free: 800-775-0703 or Customerservice@kraususa.com
Tools you will need:
Adjustable Wrench Phillips Screwdriver
Safety Goggles Bucket
3
Diagram and Parts List
E
A
B
C1
G
C2
C3
C4
A. Faucet Body
B. Base O-Ring (factory-installed)
C. Mounting Hardware:
C1. Rubber U-Washer
C2. Metal U-Washer
C3. Mounting Screw
C4. Mounting Nut
F
D
D. Hot & Cold Waterlines
E. Adjustable Aerator
F. Aerator Key
G. Hex Wrench
4
Faucet Dimensions
7.2”
183mm
1.37” MAX
6.8”
173mm
35 mm
2.4”
61mm
1.37”
35 mm
127mm
1.37”
35 mm
5”
5.03”
128mm
6”
152mm
5
Loading...