Page 1
INSTALLATION GUIDE
Purita™ Single Handle Water
Filtration Faucet
FF-100
www.kraususa.com I Toll Free: 1.800.775.0703 I © 2019 Kraus USA Inc. I REV. FEB 17, 2020
Page 2
Congratulations on the purchase of your new
Please keep the box and packaging materials until your product is
completely installed. If you have any questions, require technical
assistance, or have any problems with your product:
DO NO T RETU RN TO STORE
Please contact our Customer Service Team
1-800-775-0703 / customerservice@kraususa.com
Have the model number available, and retain a copy of your receipt
with purchase date for reference.
If for any reason this product does not meet your expectations,
please be sure to repack this product in the original box and
packaging material to avoid damage during transit.
1
Page 3
Prior to Installation:
Make sure you have all necessary parts by checking the diagram and parts list. If
•
any part is missing or damaged, please contact Kraus Customer Service at 800-775-
0703 for a replacement
•
Turn off the hot and cold water lines at the angle stops and turn on the old faucet
to release any built-up pressure
•
Pre-drilled countertop hole size requirement: 1 1/4”(min)
• Max countertop thickness: 3 1/16”
Tools you will need:
Adjustable Wrench Phillips Screwdriver
Supply Lines
Silicone Sealant
(optional)
Safety Goggles
2
Page 4
Diagram and Parts List
G
A
B
C
D
E
F
A. Faucet Assembly
B. Flange
C. Rubber Washer
D. Metal Washer
E. Mounting Nut
F. Connector
G. Hex Wrench
3
Page 5
Faucet Dimension
2 3/4“
[69.5mm]
12”
[304.5mm]
7 1/8”
[181.5mm]
6”
[153.0mm]
8 3/8“
[212.0mm]
Ø1 3/4"
[Ø45.0mm]
7/16-24UNS-2A
Installer Tip:
[77.0mm]
MAX 3 1/16”
4
Page 6
Step 1: Preparing for installation
C
D
E
Remove the rubber washer (C), metal
washer (D), and mounting nut (E) from the
end of the stud.
Step 2: Installing the faucet assembly
A
C
D
E
5
Place the faucet assembly (A) through the
selected hole in the sink or countertop.
On the underside of the sink or countertop,
slide the rubber washer (C) and metal
washer (D) onto the stud.
Thread the mounting nut (E) onto the stud,
and tighten securely using your wrench.
Page 7
Step 3: Connecting the quick connect adaptor and water line
Thread the quick connect adaptor (F) onto the
end of the faucet assembly (A) stud, and tighten
securely using a wrench.
A
F
3/8 in. Water line from
filtration system
Connect the 3/8 in. water line from the filtration
system by pushing the line into the connector (F).
Pull down on the 3/8 in. line slightly to ensure
the quick connect fitting has engaged.
6
Page 8
Replacement Parts
8
9
10
11
Replacement Parts List Part #
1. O-ring
2. Spout Nut KP27169
3. Locking Ring
4. O-ring
5. Cartridge
1
2
3
4
5
13
6. Handle
7. Index
8. Flange
9. Rubber Washer
10. Metal Washer
6
11. Mounting Nut KP27177
7
12. Connector KP27178
13. Hex Wrench KP27020
Finish / Color
CH, SFS, MB, BG,
BB, SFACB, SFSB*
CH, SFS, MB, BG,
BB, SFACB, SFSB*
GR, BL*
CH, SFS, MB, BG,
BB, SFACB, SFSB*
KP27168
KP27170
KP27171
KP27172
KP27173
KP27194
KP27174
KP27175
KP27176
12
*Denotes faucet component color options:
CH - Polished Chrome
SFS - Spot Free Stainless Steel
MB - Matte Black
BG - Brushed Gold
BB - Brushed Brass
SFACB - Spot Free Antique Champagne Bronze
SFSB - Spot Free Black Stainless
GR - Grey
BL - Black
7
Page 9
Trouble - Shooting
Hot
Water
Cold
Water
Push
If you have followed the instructions carefully and your faucet still does not work
properly, take the following coorective steps:
PROBLEM CAUSE ACTION
Leakage under the
handle
Water will not shut off
completely
Care & Maintenance
Cartridge (5) has come
loose
Cartridge may need to
be adjusted or replaced
Remove index (7) and loosen
set screw with hex
wrench (13). Remove the
handle. Tighten cartridge
(5) with a adjustable wrench
Remove index (7) and loosen
set screw with hex
wrench (13). Remove the
handle . Tighten cartridge
(5) with a adjustable wrench.
Remove the cartridge (5).
Check for cracks
*To keep the product clean & shining, follow the steps below：
1. Rinse with clean water & dry with a soft cloth
2. Do not clean with soaps, acid, polish, abrasives, or harsh cleaners
3. Do not use cloth with a coarse surface
4. Unscrew the aerator and clean when necessary
*This installation manual is subject to change without further notice.
8
Page 10
Codes/Standards Applicable:
LEAD FREE
NSF/ANSI 372
I
A
P
M
O
R
&
NSF/ANSI 61
T
ASME A112.18.1
1GPM 3.8L/min maximum
Faucet Warranty
Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (”Kraus”).
Kraus extends this warranty to the original purchaser for personal household use of the “Faucet” in its original location.
The warranty is non-transferable.
Kraus warrants the structure and finish of the product to be free from defects in material and workmanship under
normal usage for the lifetime of the product. The warranty commences from the initial date of purchase by the owner or
trade professional, from an authorized Kraus dealer, through the lifetime of the original owner or end-user.
Kraus warrants the mechanical components such as but not limited to sprayhead assembly (includes engine, aerators,
structure, restrictors, back flow preventers, sprayer hoses, braided supply line hoses which encompasses nylon,silicon
and stainless steel, etc) of the product to be free from defects in material and workmanship under normal usage for a
period of one (1) year. The warranty commences from the initial date of purchase by the owner or trade professional,
from an authorized Kraus dealer, through the one (1) year term of the original owner or end-user.
Kraus warrants the mechanical component (cartridge) of the product to be free from defects in material and
workmanship under normal usage for a period of five (5) years. The warranty commences from the initial date of
purchase by the owner or trade professional, from an authorized Kraus dealer, through the five (5) years term of the
original owner or end-user.
Any product reported to the authorized dealer or to Kraus as being defective within the warranty period will be
repaired or replaced with a product of equal value at the option of Kraus. This warranty extends to the original owner or
end-user, and is not transferable to a subsequent owner.
Restrictions
This warranty does not cover antediluvian, discontinued, or display products, whether such items are purchased at
discount outlets, unauthorized dealers, and/or sold on clearance.
This warranty does not cover instances of negligence, misuse, abuse, improper installation, carelessness, accident, hard
water or mineral deposits, exposure to corrosive materials, misapplication, damages caused by improper maintenance,
alteration of the product, or failure to follow care or installation instructions enclosed with your product. Avoid using
abrasive cleaners such as powders, bleach, ammonia, alcohol, or chlorine. Avoid using abrasive pads, steel wool, or wire
brushes, as these will damage and wear down the finish.
This warranty does not apply to Products that have not been installed or operated in accordance with instructions
supplied by Kraus and all applicable rules, regulations, and legislation pertaining to such installations.
This warranty does not apply unless the Kraus product is installed by a fully insured and licensed trade professional.
Kraus insists that such professionals have experience in the installation of bathroom and kitchen manufactured goods.
This warranty does not cover labor charges or costs of removal and reinstallation of said product. This warranty does
not allow recovery of incidental or consequential damages, such as loss of use, delay, property damage, or other
consequential damages, and Kraus accepts no liability for such damages.
This warranty does not cover Marine or Outdoor Installation.
Except as otherwise provided above, Kraus makes no warranties, expressed or implied, including warranties of
merchantability and fitness for a particular purpose, or compliance with any code.
9
Page 11
Shipping charges will be covered foe the first (1) year of the warranted replacement part or product (HI, AK, and Puerto
Rico shipping charges may apply). International shipping fees are not included.
Commercial Warranty
Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and
business use.
All incidental or consequential damages are specifically excluded. No additional warranties, express or implied, are
given, including but not limited to any implied warranty of merchantability or fitness for a particular purpose.
Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long
an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific
legal rights, and you may also have other rights which vary from state to state.
If you are a homeowner please contact a Kraus Customer Service Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
Toll-free 800-775-0703
Customerservice@kraususa.com
If you are a plumbing contractor or trade professional please contact a Kraus
Pro Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8955
Proservice@kraususa.com
If you are an Authorized Partner please contact a Partner Support Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8954
Partnersupport@kraususa.com
In requesting warranty service, please be ready to provide:
1. Proof of purchase.
2. A description of the problem.
Download the Kraus Care & Maintenance Guide at:
http://www.kraususa.com/maintenance
10
Page 12
IMPORTANT
Register Your Kraus Product
Activate Your Warranty
Access Premium Customer Support
Get Product Information
REGISTER TODAY
http://www.kraususa.com/registration
www.kraususa.com
Loading...