INSTALLATION GUIDE
Arlo™ Single Lever Vessel Faucet
KVF-1200
www.kraususa.com I Toll Free: 1.800.775.0703 I © 2017 Kraus USA Inc. I REV. Dec 2, 2017
Congratulations on the purchase of your new
Kraus plumbing xture!
Please keep the box and packaging materials until your product is
completely installed. If you have any questions, require technical
assistance, or have any problems with your product:
DO NOT RETURN TO STORE
Please contact our Customer Service Team
1-800-775-0703 / customerservice@kraususa.com
Have the model number available, and retain a copy of your receipt
with purchase date for reference.
If for any reason this product does not meet your expectations,
please be sure to repack this product in the original box and
packaging material to avoid damage during transit.
1
1
Prior to Installation:
Make sure you have all necessary parts by checking the diagram and parts list. If
•
any part is missing or damaged, please contact Kraus Customer Service at 800-7750703 for a replacement
Turn o the hot and cold water lines at the angle stops and turn on the old faucet
•
to release any built-up pressure
•
Pre-drilled countertop hole size requirement: 1-3/8” (min)
•
Max countertop thickness: 2”
Diagram and Parts List
I
A. Faucet Body
B. Washer
C. Lock Nut
F
A
G
H
B
C
D
E
D. Waterlines
E. Flange
F. Aerator
G. Aerator Key
H. Hex Wrench
I. Drain
2
Faucet Dimension
12 1/8”
[307mm]
6 3/4”
[171mm]
5”
[128mm]
8 1/4”
[209mm]
2 1/4”
[57mm]
2”
[51mm]
2-9/16-24UNEF-2B
Installer Tip:
Shut o main water supply before installing new faucet
3
Step 1: Remove washer and lock nut
Shut o the water supply. Remove the
old faucet. Clean the mounting surface.
Remove the washer (B) and lock nut (C)
from the faucet (A).
A
B
C
Step 2: Install faucet
Before installation, ensure that the
A
E
D
B
ange (E) is placed on the bottom
of the faucet assembly (A). Place faucet (A)
through the 1-3/8” holes in countertop .
Secure the faucet (A) to the countertop
using the washer (B) and lock nut (C)
provided. Ensure the washer (B) and
hoses (D) are no interference.
B
C
C
4
Step 3: Connect waterlines to main valve
Attach waterlines(D) to angle stops
and tighten until snug. Turn on angles
stops and check for leaks (DO NOT TURN
FAUCET ON)
D
Step 4: Install Press pop-up assembly
Unscrew the nut (5) from the pop-up
body (1), move over the tail pipe (6)
1
and washer (4), then unscrew the
coupling nut (3) and remove the
washer (2).
2
3
4
5
6
5
Step 4: Install Press pop-up assembly
1
2
3
4
1
2
3
Place the washer (1) underneath the
ange of the pop-up body (2). Slide
the pop-up body (2) down through
the drain hole on the vessel or basin.
From underside, slide the washer (3)
against the bottom of the vessel or
basin, thread on the coupling nut (4)
and tighten. Do not overtighten.
Slide the nut (2) over the tail pipe (3).
Place the washer (1) into the nut and
tighten. Do not overtighten.
Step 5: Flush faucet
F
G
After installing faucet, remove
aerator (F) with included aerator
key (G). Turn water on for 30
seconds to remove any debris.
Reassemble aerator (F).
6
13
Replacement Parts
8
9
1
2
3
4
5
6
14
1. Index
2. Set Screw
3. Handle
7
4. Cap
5. Bonnet Nut
6. Screw
7. Cartridge
8. Aerator
9. Aerator Wrench
10. Washer
11. Lock Nut
10
12. Flange
13. Press pop-up assembly
11
14. Hex Wrench
13
Tools you will need:
Wrench Phillips Screwdriver
7
12
Pipe Tape
Silicone Sealant
(optional)
Safety Goggles
Trouble - Shooting
Hot
Water
Cold
Water
Push
If you have followed the instructions carefully and your faucet still does not work
properly, take the following corrective steps:
PROBLEM C A U S E A C T I O N
Leakage under the
handle
Aerator drips or has
inconsistent water ow
pattern
Water will not shut o
completely
There is leaking from the
sink drain at the base of
the sink.
Bonnet nut (5) has
come loose
Aerator (8) is dirty or
not seated properly
Cartridge may need to
be adjusted or replaced
The sink has a rough or
irregular surface.
Remove the index (1).
Loosen set screw (2) with
hex wrench (14). Remove
the handle (3). Unscrew
cap (4) (by hand only).
Tighten bonnet nut
(5) with an adjustable
wrench
Unscrew aerator (8)
with aerator wrench (9)
and clean out debris
Remove the index (1).
Loosen set screw (2) with
hex wrench (14). Remove
the handle (3). Unscrew
cap (4) (by hand only).
Tighten bonnet nut
(5) with an adjustable
wrench. Remove the
cartridge (7). Check for
cracks
Apply additional silicone
sealant to the beveled
side of the drain ange.
Retighten and test for
leaks
Care & Maintenance
*To keep the product clean & shining, follow the steps below:
1. Rinse with clean water & dry with a soft cloth
2. Do not clean with soaps, acid, polish, abrasives, or harsh cleaners
3. Do not use cloth with a coarse surface
4. Unscrew the aerator and clean when necessary
*This installation manual is subject to change without further notice.
8
Codes/Standards Applicable:
NSF/ANSI 372
GREEN
LEAD FREE
I
A
P
M
O
R
&
NSF/AN SI 61
T
TM
ASME A112.18.1
1.2GPM 4.5L/min maximum
Faucet Warranty
Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”).
Kraus extends this warranty to the original purchaser for personal household use of the “Faucet” in its original
location. The warranty is non-transferable.
Kraus warrants the structure and finish of the product to be free from defects in material and workmanship under
normal usage for the lifetime of the product. The warranty commences from the initial date of purchase by the
owner or trade professional, from an authorized Kraus dealer, through the lifetime of the original owner or
end-user.
Kraus warrants the mechanical components such as but not limited to sprayhead assembly (includes engine,
aerators , structure, restrictors, back flow preventers, sprayer hoses, braided supply line hoses which encompasses nylon, silicon and stainless steel, etc) of the product to be free from defects in material and workmanship
under normal usage for a period of one (1) year. The warranty commences from the initial date of purchase by the
owner or trade professional, from an authorized Kraus dealer, through the one (1) year term of the original owner
or end-user.
Kraus warrants the mechanical component (cartridge) of the product to be free from defects in material and
workmanship under normal usage for a period of five (5) years. The warranty commences from the initial date of
purchase by the owner or trade professional, from an authorized Kraus dealer, through the five (5) year term of
the original owner or end-user.
Any product reported to the authorized dealer or to Kraus as being defective within the warranty period will be
repaired or replaced with a product of equal value at the option of Kraus. This warranty extends to the original
owner or end-user, and is not transferable to a subsequent owner.
Restrictions
This warranty does not cover antediluvian, discontinued, or display products, whether such items are purchased
at discount outlets, unauthorized dealers, and/or sold on clearance.
This warranty does not cover instances of negligence, misuse, abuse, improper installation, carelessness,
accident, hard water or mineral deposits, exposure to corrosive materials, misapplication, damages caused by
improper maintenance, alteration of the product, or failure to follow care or installation instructions enclosed with
your product. Avoid using abrasive cleaners such as powders, bleach, ammonia, alcohol, or chlorine. Avoid using
abrasive pads, steel wool, or wire brushes, as these will damage and wear down the finish.
This warranty does not apply to Products that have not been installed or operated in accordance with instructions
supplied by Kraus and all applicable rules, regulations, and legislation pertaining to such installations.
This warranty does not apply unless the Kraus product is installed by a fully insured and licensed trade
professional. Kraus insists that such professionals have experience in the installation of bathroom and kitchen
manufactured goods.
This warranty does not cover labor charges or costs of removal and reinstallation of said product. This warranty
does not allow recovery of incidental or consequential damages, such as loss of use, delay, property damage, or
other consequential damages, and Kraus accepts no liability for such damages.
This warranty does not cover Marine or Outdoor Installation.
9
Except as otherwise provided above, Kraus makes no warranties, expressed or implied, including warranties of
merchantability and fitness for a particular purpose, or compliance with any code.
Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK, and
Puerto Rico shipping charges may apply). International shipping fees are not included.
Commercial Warranty
Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial,
and business use.
All incidental or consequential damages are specifically excluded. No additional warranties, express or implied,
are given, including but not limited to any implied warranty of merchantability or fitness for a particular purpose.
Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how
long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives
you specific legal rights, and you may also have other rights which vary from state to state.
If you are a homeowner please contact a Kraus Customer Service Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
Toll-free 800-775-0703
Customerservice@kraususa.com
If you are a plumbing contractor or trade professional please contact a Kraus
Pro Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8955
Proservice@kraususa.com
If you are an Authorized Partner please contact a Partner Support Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8954
Partnersupport@kraususa.com
In requesting warranty service, please be ready to provide:
1. Proof of purchase.
2. A description of the problem.
Download the Kraus Care & Maintenance Guide at:
http://www.kraususa.com/maintenance
10
IMPORTANT
Register Your Kraus Product
Activate Your Warranty
Access Premium Customer Support
Get Product Information
REGISTER TODAY
http://www.kraususa.com/registration
www.kraususa.com
Loading...