INSTALLATION MANUAL
Natura™ Series White Matte
Vessel Bathroom Sink
KSV-1MW / KSV-2MW / KSV -3MW / KSV-4MW /
KSV-5MW / KSV-6MW
www.kraususa.com I Toll Free: 1.800.775.0703 I © 2017 Kraus USA Inc. I REV. September 29, 2017
Thank you for your purchase
We would like to take this opportunity to thank you for choosing Kraus.
We hope that you are completely satised with your purchase, and enjoy it for years
to come. If you have any questions, or require technical assistance, please contact
us at 800.775.0703 and one of our representatives will be happy to help.
For more information about Kraus products, please visit:
www.kraususa.com
In order to activate your warranty and get faster access to customer support, please
register your new Kraus product at:
www.kraususa.com/registration
Sincerely,
Kraus USA Customer Service
2
Prior to Installation:
Inspect the sink prior to installation to make sure it has not been cracked or
•
chipped during shipping
• Observe all plumbing and building codes according to your state requirements
• Additional oor and wall preparation may be required to avoid damaging the sink
WARNING: This product is fragile and can break, chip, or cause injury if handled
recklessly. Please consult with a professional when installing
For technical assistance or replacement parts, please contact Kraus
Customer Service and one of our representatives will be happy to help:
Toll-Free: 800-775-0703 or customerservice@kraususa.com
The step-by-step guidelines in the installation instructions are a general reference for installing
a Kraus Sink. Should there be any discrepancies, Kraus cannot be held liable. It is recommended
to install all Kraus products by hiring a licensed professional.
3
Tools you will need:
Safety Goggles Drill
Pencil
Tape Measure
Parts List (Included)
• Cleaning Sponge • Buffing Paper
Dimensions
Silicone Adhesive
14”
4” Hole Saw
20”
1.7”
4.9”
15”
4.9”
KSV-1MW
15” x 4.9”
4
KSV-2MW
20” x 14” x 4.9”