We would like to take this opportunity to thank you for choosing Kraus.
We hope that you are completely satised with your purchase, and enjoy it for years
to come. If you have any questions, or require technical assistance, please contact
us at 800.775.0703 and one of our representatives will be happy to help.
For more information about Kraus products, please visit:
www.kraususa.com
In order to activate your warranty and get faster access to customer support, please
register your new Kraus product at:
www.kraususa.com/registration
Sincerely,
Kraus USA Customer Service
2
Page 3
Prior to Installation:
Make sure that you have all necessary parts by checking the parts list. If any part is
•
missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a
replacement.
• Inspect the sink prior to installation to make sure it has not been cracked or
chipped during shipping
• Use the cut-out template provided by Kraus
• Observe all plumbing and building codes according to your state requirements
• Additional oor and wall preparation may be required to avoid damaging the sink
WARNING: This product is fragile and can break, chip, or cause injury if handled
recklessly. Please consult with a professional when installing
For technical assistance or replacement parts, please contact Kraus
Customer Service and one of our representatives will be happy to help:
Toll-Free: 800-775-0703 or customerservice@kraususa.com
The step-by-step guidelines in the installation instructions are a general reference for installing
a Kraus Sink. Should there be any discrepancies, Kraus cannot be held liable. It is recommended
to install all Kraus products by hiring a licensed professional.
3
Page 4
Tools you will need:
Phillips screwdriver
R.79
20
15”
381mm
40mm
15"
381mm
Ø1-3/4”
45mm
15"
R1.57
40
18-3/4"476mm
45mm
14-1/4"
362mm
1/4"
15mm
Ø1-3/4”45mm
1/4"
Safety GogglesDrill
4” Hole Saw
Pencil
Silicone Adhesive
Tape Measure
Dimensions
1-3/4”
18-3/4"
476mm
R0.59
15
Ø1-3/4”
45mm
15mm
2.5°
4.-5/16”
110mm
5.-1/4”
133mm
15”
R.79
20
381mm
12.5°
1-9/16”
381mm
14”
356mm
Ø1-3/4”
45mm
R0.59
15
R1.57
40
362mm
14-1/4"
20°
20°
4-5/16”
110mm
5-1/4”
133mm
KCV-120
15” x 15” x 5 1/4”
4
KCV-121
18 3/4” x 14 1/4” x 5 1/4”
Page 5
Dimensions
R2.36
60
11-3/4”
298mm
19-1/4”489mm
Ø1-3/4”
45mm
50mm
16”
16”
4-1/2”
114mm
11-3/8”
16”
406mm
16”
406mm
Ø1-3/4”45mm
290mm
R30762
R3.94
100
15-1/2”394mm
Ø8-1/2”
Ø 215mm
1”
25mm
15-1/2”
394mm
Ø17-3/4”
Ø17-3/4”450mm
18°
5”
125mm
Ø1-3/4”45mm
125mm
R2.36
60
19-1/4”
489mm
406mm
11-3/4”
298mm
3/8”
10mm
KCV-122
19 1/4” x 11 3/4” x 5”
15-1/2”
394mm
15-1/2”
394mm
Ø1-3/4”
45mm
Ø1-3/4”
10”
255mm
11-3/8”
R0.59
45mm
3/4”
20mm
4-1/2”
114mm
3-1/2”
90mm
2.5°
15
406mm
3-3/4”
95mm
5”
127mm
R0.20
5
1-3/4"
[45]
2”
KCV-125
16” x 16” x 3 1/2”
R30
762
R3.94
100
450mm
Ø1-3/4”
45mm
1/4”
6mm
25mm
5”
127mm
1-3/8”
35mm
1”
Ø8-1/2”
Ø 215mm
Ø2-3/4”
Ø 70mm
KCV-135
15 1/2” x 15 1/2” x 6”
R 0.59
15
6”
152mm
1-3/4”
45mm
KCV-140
Ø 17 3/4” x 3 1/8”
R.39
10
2.5°
3-1/8”
80mm
18°
5”
5
Page 6
Dimensions
Ø15-3/4”
6-1/4”
158mm
Ø1-3/4”
45mm
Ø1-3/8”
Ø18-1/4”
463mm
Ø1-3/8”
Ø35mm
7-1/4”
184mm
4-5/16”110mm
0.2”
5mm
5-1/2
140mm
Ø1-3/4”
45mm
140mm
18-1/2”470mm
2-1/2”
65mm
5°
Ø1-3/8”
Ø 35mm
5/16”8mm
5-3/4"
147mm
2-3/8”60mm
5-5/16”135mm
18-1/2”
470mm
Ø1-3/4”
45mm
Ø1-3/4”
45mm
Ø 400mm
R 0.39
Ø5-1/2”
10mm
Ø140mm
KCV-141
Ø15 3/4” x 6 1/4”
18-1/2”
2-1/2”
65mm
470mm
Ø1-3/8”
Ø 35mm
09/16”
15 mm
9/16”
15 mm
R 7.87
Ø18-1/4”
463mm
1-1/4”
32mm
200
5-5/16”
135mm
6-1/4”
158mm
1-3/8”
35mm
R.59
Ø3-1/8”
Ø 80mm
Ø35mm
7-1/4”
45mm
Ø1"
Ø 25mm
4-5/16”
110mm
184mm
3/8”
10mm
2.5°
3.-1/2”
90mm
0.2”
5-1/2
5mm
Ø1-3/4”
15
KCV-142
Ø18 1/4” x 5 1/2”
6
1-1/4”
32mm
KCV-150
2-3/8”
60mm
R.59
15
10°
Ø2-3/4”
Ø70mm
18 1/2” x 18 1/2” x 5 3/4”
Ø1-3/4”
45mm
5°
Ø25mm
Ø1”
5-5/16”
135mm
Ø15mm
2.5°
470mm
18-1/2”
Ø5/8”
3-3/4"
96.5mm
5/16”
8mm
5-3/4"
147mm
Page 7
1. Mark faucet and drain hole location
• Place sink in desired location on countertop and mark drain hole and
faucet hole centerline with a pencil
NOTE: Make sure clearance is suitable for backsplash, faucet, and sink
plumbing
NOTE: Please allow a minimum of 4.5” from wall to edge of sink for faucet
placement clearance
NOTE: For model numbers KCV-142 and KCV-150, faucet hole location should be
measured from center of drain hole to center of faucet hole on sink
2”
2 1/2”
2. Drill countertop
• Cut the drain opening in the countertop by carefully placing the 4”
hole saw on the area marked by pencil
7
Page 8
3. Install sink
2”
2 1/2”
• Check the alignment of the sink to the opening in the countertop. Use a
bead of clear silicone (or preferred adhesive) around the underside of the sink
• Carefully place the sink on the countertop, align, and press rmly
• Allow sealant to set for 30 – 60 minutes
NOTE: Please make sure Kraus logo is facing you when mounting sink
NOTE: Use acetone or rubbing alcohol to remove any excess sealant
immediately after application
4. Install plumbing xtures
• Connect drain to sink. Connect trap to drain. Connect water supply
connections to faucet according to manufacturer’s instructions
• Run water into sink and check for leaks
8
Page 9
Codes/Standards Applicable:
KRAUS LIMITED LIFETIME WARRANTY
This product has been manufactured and tested to the highest quality standards
by Kraus USA Inc. (“Kraus”). We offer our customers thoughtfully crafted fixtures
& accessories, engineered for enduring performance over years of use.
WHO IS COVERED BY THE WARRANTY
This warranty extends to the original purchaser only. This warranty is not
transferable, between homes or owners and is only applicable to residential use.
WHAT IS COVERED BY THE WARRANTY
Kraus warranties this product against defects due to material or craftsmanship
error during the warranty period: Kraus will provide replacement parts at
no charge, or at its option, replace any product or part of the product that is
deemed defective, under normal installation, use, service and maintenance. If
Kraus is unable to provide a replacement and repair is not practical or cannot
be made in timely fashion, Kraus may elect to refund the purchase price in
exchange for the return of the product.
CONDITIONS AND EXCLUSIONS
Like other home fixtures, Kraus products will require light maintenance to ensure proper function. We provide you with complete knowledge to perform this
maintenance and can also recommend resources if you are unable to fulfill this
service.
A. Kraus will not be responsible for product failures due to lack of maintenance
or proper use. Please read your care and maintenance documentation to determine the limits of proper use.
B. The original sales receipt, order number, and/or proof of purchase must be
presented at the time of the warranty claim, without exception, for this warranty
to be applied to all Kraus products.
9
Page 10
C. Kraus recommends installing all Kraus products with a licensed, professional
plumber. Kraus will not be held responsible for any damage or product failure
due to improper installation, misuse, or failure to use a licensed professional.
Please read your care and maintenance documentation to determine the limits
of proper use.
D. Commercial use will automatically void this warranty.
E. This warranty is not applicable to Kraus products purchased from an unau-
thorized seller. For a complete list of authorized sellers please visit http://www.
kraususa.com/where-to-buy.html
NON-APPLICABILITY OF THIS WARRANTY
By the purchase and use of our products, you agree that Kraus is not liable
for incidental, consequential or special damages associated with the return,
replacement, installation or use of your product. This includes freight costs,
cartridge replacement, labor, travel time, lost profit, home damages and other
contingent liabilities and costs (including, without limitation, costs associated
with experts, investigations, analyses, attorneys and other professionals and
services). The Kraus warranty is a comprehensive and explicit limit of liability,
and all items outside of it are not addressable by or the responsibility of
Kraus. Certain states have variances regarding implied warranties and in those
situations we remain fully compliant.
KRAUS USA Inc. makes no implication that products comply with any or all local
building or plumbing codes. It is the consumer’s responsibility to determine
local code compliance. This warranty extends to the original purchaser and first
consumer.
Download the Kraus Care & Maintenance Guide at:
http://www.kraususa.com/care-and-maintenance.html
10
Page 11
HELP LINE
Our customer service hours are Monday – Friday, 9am – 8pm EST.
Be sure to visit our website at www.kraususa.com
If you are a HOMEOWNER please contact a Kraus Customer Service Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
Toll-free 800-775-0703
Customerservice@kraususa.com
If you are a PLUMBING CONTRACTOR OR TRADE PROFESSIONAL please contact a Kraus
Pro Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8955
Proservice@kraususa.com
If you are an AUTHORIZED PARTNER please contact a Partner Support Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8954
Partnersupport@kraususa.com
In requesting warranty service, please be ready to provide:
1. Proof of purchase.
2. A description of the problem.
11
Page 12
REGISTER YOUR PRODUCT TODAY
Receive Proof of Ownership
Access Customer Care & Installation Help
Get Exclusive Kraus Oers & Promotions
Scan to Register Online
or visit http://www.kraususa.com/registration
We’re always looking for ways to improve.
Please take a moment to share your experience.
Visit http://www.kraususa.com/review to let us know what you think