Congratulations on the purchase of your new
Kraus plumbing xture!
Please keep the box and packaging materials until your product is
completely installed. If you have any questions, require technical
assistance, or have any problems with your product:
DO NOT RETURN TO STORE
Please contact our Customer Service Team
1-800-775-0703 / customerservice@kraususa.com
Have the model number available, and retain a copy of your receipt
with purchase date for reference.
If for any reason this product does not meet your expectations,
please be sure to repack this product in the original box and
packaging material to avoid damage during transit.
1
Page 3
7/8”
19.7
º
(22mm)
8 5/16”
1 1/4-18UNF-2A
(21mm)
10 1/8”
(257mm)
1 3/8”
(35mm)
AB1953
Exquisite Collection
Installation Manual
Adjustable wrench
Plpe tape (supplied)
Phillips screwdriver
Adjustable wrench
KEF-14300
AB1953
Prior to Installation:
Make sure you have all necessary parts by checking the diagram and parts list. If
•
any part is missing or damaged, please contact Kraus Customer Service at 800-
775-0703 for a replacement
• Turn o the hot and cold water supply at the angle stops and turn on the old
faucet to release any built up pressure. Remove existing faucet. Clean sink or
countertop to remove any debris, plumber’s putty, or silicone
• Pre-drilled hole size requirement: 1-3/8” (min)
• Max countertop thickness: 1-3/8”
Tools you will need:
Adjustable Wrench Phillips Screwdriver
Pipe TapeSpanner for body
2
Page 4
Diagram and Parts List
1
3
4
5
6
7
8
2
O
7.1’’
5.2’’
8.8’’
O
O
1. Faucet body
2. Threaded pipe
3. O-ring
4. Rubber washer
5. Brass washer
6. Fixing ring
7. Mounting screws
8. Waterlines
3
Page 5
Faucet Dimensions
Before Your Installation
O
O
7.1’’
8.8’’
12.6’’
2.5’’
1.4’’
5.2’’
4
Page 6
Step 1
1
1 3/8’’
O
1 3/8’’
O
Place the O-ring 2 over threaded pipe to the bottom of the faucet body1.
Then insert the threaded pipe 2 of the faucet body 1 into the drilled 1 3/8’’
hole of the countertop
5
Page 7
Step 2
2
1 3/8’’
O
Insert the rubber washer 4 and brass washer 5 on to the threaded pipe
3, then screw the xing ring 6. After place faucet body 1 correctly and
tighten the mounting screws 7. Screw waterlines 8 into the corresponding
screw-hole of faucet body 1
6
Page 8
Trouble - Shooting
HotWater
ColdWater
Push
If you have followed the instructions carefully and your faucet still does not work
properly, take the following corrective steps:
PROBLEMCAUSEACTION
Leakage under the
handle
Aerator leaks or has an
inconsistent water flow
pattern
Water will not shut off
completely
Adjusting ring or cap
has come loose
Aerator is dirty or
misfitted
Dirty or worn out
plastic washer in the
cartridge
Unscrew the aerator to
check rubber packing or
replace the aerator
Unscrew the aerator to
check rubber packing
or replace the aerator
Remove handle and
cartridge to check if
ceramic disk is damage
permanently or dirty
Re-install cartridge
Care & Maintenance
*To keep the product clean & shining, follow the steps below:
1. Rinse with clean water & dry with a soft cloth
2. Do not clean with soaps, acid, polish, abrasives, or harsh cleaners
3. Do not use cloth with a coarse surface
4. Unscrew the aerator and clean when necessary
*This installation manual is subject to change without further notice.
7
Page 9
Codes/Standards Applicable:
NSF/ANSI 372
GREEN
Water Eciency
LEAD FREE
I
A
P
M
O
R
&
NSF/ANSI 61
T
TM
ASME A112.18.1M
1.2GPM 4.5L/min maximum
FAUCET WARRANTY
Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”). Kraus extends
this warranty to the original purchaser for personal household use of the “Faucet” in its original location. The warranty
is non-transferable.
Kraus warrants the structure and nish of the product to be free from defects in material and workmanship under
normal usage for the lifetime of the product. The warranty commences from the initial date of purchase by the owner
or trade professional, from an authorized Kraus dealer, through the lifetime of the original owner or end-user.
Kraus warrants the mechanical components (such as sprayhead assembly) of the product to be free from defects in
material and workmanship under normal usage for a period of one (1) year. The warranty commences from the initial
date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the one (1) year term of
the original owner or end-user.
Kraus warrants the mechanical component (cartridge) of the product to be free from defects in material and
workmanship under normal usage for a period of ve (5) years. The warranty commences from the initial date of
purchase by the owner or trade professional, from an authorized Kraus dealer, through the ve (5) year term of the
original owner or end-user.
Any product reported to the authorized dealer or to Kraus as being defective within the warranty
or replaced with a product of equal value at the option of Kraus. This warranty
extends to the original owner or
period will be repaired
end-user, and is not transferable to a subsequent owner.
RESTRICTIONS
This warranty does not cover antediluvian, discontinued, or display products, whether such items are purchased at
discount outlets, unauthorized dealers, and/or sold on clearance.
This warranty does not cover instances of negligence, misuse, abuse, improper installation, carelessness, accident, hard
water or mineral deposits, exposure to corrosive materials, misapplication, damages caused by improper maintenance,
alteration of the product, or failure to follow care or installation instructions enclosed with your product. Avoid using
abrasive cleaners such as powders, bleach, ammonia, alcohol, or
wire brushes, as these will damage and wear down the nish.
This warranty does not apply to Products that have not been installed or operated in accordance with instructions
supplied by Kraus and all applicable rules, regulations, and legiswlation pertaining to such installations.
This warranty does not apply unless the Kraus product is installed by a fully insured and licensed trade professional.
Kraus insists that such professionals have experience in the installation of bathroom and kitchen manufactured goods
This warranty does not cover labor charges or costs of removal and reinstallation of said product. This warranty does
not allow recovery of incidental or consequential damages, such as loss of use, delay, property damage, or other
consequential damages, and Kraus accepts no liability for such damages.
This warranty does not cover Marine or Outdoor Installation.
Except as otherwise provided above, Kraus makes no warranties, expressed or implied, including warranties of
chlorine. Avoid using abrasive pads, steel wool, or
8
Page 10
merchantability and tness for a particular purpose, or compliance with any code.
Shipping charges will be covered for the rst (1) year of the warranted replacement part or product (HI, AK, and Puerto
Rico shipping charges may apply). International shipping fees are not included.
COMMERCIAL WARRANTY
Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and
business use.
All incidental or consequential damages are specically excluded. No additional warranties, express or implied, are given,
including but not limited to any implied warranty of merchantability or tness for a particular purpose.
Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long
an implied warranty lasts, so the above limitations or exclusions may not apply to you.
This warranty gives you specic legal rights, and you may also have other rights which vary from state to state.
If you are a homeowner please contact a Kraus Customer Service Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
Toll-free 800-775-0703
Customerservice@kraususa.com
If you are a plumbing contractor or trade professional please contact a Kraus
Pro Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8955
Proservice@kraususa.com
If you are an Authorized Partner please contact a Partner Support Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8954
Partnersupport@kraususa.com
In requesting warranty service, please be ready to provide:
1. Proof of purchase.
2. A description of the problem.
Download the Kraus Care & Maintenance Guide at:
http://www.kraususa.com/maintenance
9
Page 11
Page 12
IMPORTANT
Register Your Kraus Product
Activate Your Warranty
Access Premium Customer Support
Get Product Information
REGISTER TODAY
http://www.kraususa.com/registration
www.kraususa.com
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.