INSTALLATION MANUAL
Single Lever Vessel Glass Waterfall
Bathroom Faucet
KGW-1700
www.kraususa.com I toll free: 1.800.775.0703 I © 2013-2014 Kraus USA Inc.
Thank you for purchasing Kraus
We would like to take this opportunity to thank you for your business with Kraus
USA. It is our sincere hope that you are completely satised with your experience.
We welcome any questions or comments you may have, and will be glad to assist
you in the future.
For more information about Kraus products, please visit our website at:
www.kraususa.com
Please register your new Kraus product at the following web address in order to
activate the warranty and receive the full benet of customer support:
www.kraususa.com/registration
Sincerely,
Kraus Customer Service Department
Prior to Installation:
• Make sure you have all necessary parts by checking the diagram and parts
list. If any part is missing or damaged, please contact Kraus Customer
Service at 800-775-0703 for a replacement
• Turn o the hot and cold water lines at the angle stops and turn on the old
faucet to release any built-up pressure
• Flush angle stops to release any debris prior to installing new plumbing
• Pre-drilled hole: 1-3/8” (min)
• Max countertop thickness: 1-3/8”
Diagram and Parts List
1. Decorative Ring
2. Glass Disc
3. Lever
4. Seal for Glass Disc
5. Faucet Body
6. Mounting Hardware
(A) Rubber Washer
(B) Metal Washer
(C) Mounting Nut
(D) Mounting Screws
7. Hot & Cold Waterlines (2)
8. Hex Wrench
9. Manual
Tools you will need:
Adjustable Wrench
Phillips Screwdriver
Pipe Tape