Kranzle LX 2000, LX 2500, WS 800 TS, WS 1000 TS, WS 1200 TS Operating Manual
...
www.kraenzle.com
High-pressure cleaner
LX 2000
LX 200
Operating manual
EN
2 3
EN
Operating manual
High-pressure cleaner
LX 2000
LX 200
Operating manual!
This manual is a translation of the original manual. Read and conform safety
instructions before use! Keep instructions in a safe place for later use and pass
them on to any future user.
4 5
Contents Explanatory symbols
Explanatory symbols used in the operating manual
Failure to observe this note may entail
environmental damage.
Note on the use of the high pressure cleaner that failure to
adhere to the instructions may cause excessive wear or total
breakdown of the LX-series.
Warning!
Failure to observe this note may result in serious injuries!
Explanatory symbols affixed to the high pressure cleaner
In case of improper use, the high pressure jets can be very
dangerous. Do not direct high pressure jet at persons,
animals or active electrical equipment or the high pressure
cleaner itself.
The high pressure cleaner may not be connected directly
to the public drinking water supply network.
Dear customer:
We would like to congratulate you on the purchase of your new high pressure
cleaner and thank you for your confidence in our products!
Your choice has fallen on an absolute quality product!
Kränzle high pressure cleaners are characterized by their convenient and compact
design as well as their high suitability for everyday use.
Highest precision and dimensional accuracy in addition to a technology package
consisting of a multitude of details mark the difference when it comes to
performance, safety and durability.
In order to facilitate handling of the high pressure cleaner, the following pages are
intended to further explain its use. The illustrations may be subject to deviation
depending on the type of equipment or accessory of high pressure cleaner
purchased by you.
Contents ..................................................................................................... 4
Explanatory symbols ..........................................................................
Safety notes ............................................................................................. 6
Description of high pressure cleaner ............................................ 9
General rules ............................................................................................ 11
Functional details .................................................................................. 13
Putting into operation ........................................................................ 18
Direct suction .......................................................................................... 22
Taking out of operation ...................................................................... 23
Small repairs - do it yourself ............................................................. 24
Kränzle accessories ............................................................................... 28
EC declaration of conformity ........................................................... 3
Warranty ................................................................................................... 31
Inspection reports ................................................................................. 32
6 7
Safety notes - This is prohibited!Safety notes
User operating the high pressure cleaner should wear the necessary protective
clothing, i.e. waterproof clothing, rubber boots, safety goggles, headwear etc.
It is prohibited to use the high pressure cleaner in close vicinity to people lacking
suitable protective clothing.
Do not spray against matter containing asbestos or other hazardous substances!
Never spray liquids containing solvents like varnish solvents, petrol, oil or similar
liquids! There is an explosion hazard due to spraying such materials!
Due to the high pressure jet, damage may occur on the objects to be cleaned,
e.g. car tires; therefore, a minimum distance of 30 cm is to be kept!
Prior to putting the high pressure cleaners into operation, check its components
(High pressure hose, power supply cables, safety trigger gun) for any damage.
Replace defect or damaged components!
Replacement of the power supply cables is only permitted by use of an original
power supply cable of the manufacturer and must be performed by a qualified
electrician.
The high pressure cleaner is to be properly used. The user is required to adhere
to local requirements and to watch out for the persons in the danger zone!
The high pressure cleaner is not intended for use by persons with reduced
physical, sensory or mental capabilities, unless such persons are supervised
and capable of perceiving the risks involved in the use of high pressure cleaners!
The water drained through the thermo valve is very hot and may cause burns
in case of skin contact.
Never allow children or untrained persons
to use the high pressure cleaner or to play
with it!
When using high pressure water for cleaning,
make sure that there is a clearly noticeable
recoil effect on the lance. Therefore ensure
a firm footing (see technical data).
Never direct the high pressure jet at power
sockets or any other electrical installations!
Within the working area, all live parts are to
be protected from both water jet and spray
mist.
Never direct the high pressure jet at the
high pressure cleaner itself!
The high pressure cleaner may not be
placed within reach of the high pressure
jet spray mist!
8 9
Safety notes - This is prohibited!
Never direct the high pressure jet at people
or animals!
Never direct the high pressure jet at yourself or other persons, not even to clean
clothing or shoes.
Apply the safety catch on the safety trigger
gun after each use in order to prevent
unintentional spraying!
Only use a power supply cable in perfect
working order!
Do not damage or improperly repair
the power cable (tearing, squeezing,
running over, ...).
Never pull the high pressure hose if it has
formed kinks or “nooses”!
Never pull the high pressure hose over
sharp edges!
Description of high pressure cleaner
Design:
Both the LX 2000 and the LX 2500 are portable type high pressure cleaners.
Please see construction scheme for more details.
1. Handle
2. Pump head made of brass
3. Hose drum with 20 m
steel weave high pressure hose
4. Holders for trigger gun with
safety catch with lance
5. Trigger gun with safety catch
and plug coupling
6. Large stainless steel pressure
gauge
7. On/Off switch
8. Integrated trolley takes rough
ground in its stride
9. Infinitely variable pressure
and quantity regulation
10 11
Description of high pressure cleaner
This is what you have purchased:
1. High-pressure cleaner
LX 2000
LX 2500
2. Trigger gun with safety catch
and plug coupling
3. Stainless steel lance with flat jet
nozzle and quick release coupling
4. Operating manual
Spare par ts list
Optional:
1000 mm turbokiller with stainless
steel lance and plug-in nipple
LX 2000: Ord. no.: 12430-12
LX 200: Ord. no.: 12430-18
Water inlet filter
Ord. no.: 133203
General rules
Intended use
This high pressure cleaner is to be used solely for high pressure water jet cleaning
applications without detergents or low-pressure cleaning work with detergents
(e.g. with a foam injector or washing brush).
Environmental, refuse disposal and water protection regulations
must be observed!
Inspections
The high pressure cleaner must be inspected according to the “Guidelines for
Liquid Spray Devices” at least once every 12 months by a qualified person, to
ensure that continued safe operation is guaranteed. The results of the inspection
are to be recorded in writing (see Inspection reports).
High pressure cleaners used for commercial purposes have
to be checked by a qualified person at least every 12 months!
Accident prevention
The high pressure cleaner is designed for accidents to be impossible if used
correctly. The user is to be notified of the risk of injury from hot machine parts
and the high pressure jet. The “Guidelines for Liquid Spray Devices” must be
complied with.
Loading...