Kramer Electronics XE-12S User Manual

Your XE-12S 1:2 s-Video Distributor

Congratulations on purchasing your XE-12S, which is intended for s-Video duplication studios,
rental/staging, CCTV, and home theater use. Your XE-12S 1:2 s-Video Distributor takes an
s-Video input signal and distributes it to two identical s-Video output signals on 4-PIN
connectors.

The XE-12S has a high bandwidth (85MHz), and uses an energy-saving 5V DC power
adapter that’s provided free!

Connecting the XE-12S 1:2 s-Video Distributor

To setup your XE-12S, connect:

1. An s-Video source (for example, an s-Video player or DVD) to the INPUT 4-PIN
connector.

2. The OUTPUT 4-PIN connectors to up to two acceptors (for example, s-Video
recorders).

3. The 5V DC power adapter to the power socket and connect the adapter to the mains
electricity.

Note:

Use good quality connection cables to avoid interference, deterioration in signal quality due to poor matching, and elevated noise
levels (often associated with low quality cables) and position your product away from moisture, excessive sunlight and dust.

For assistance, contact your dealer. Product Warranty is for one year.

P/N: 2900-000903

Caution – No operator-serviceable parts inside unit.

Warning – Use only the XE input power wall adapter that is provided with this unit.

Warning – Disconnect power and unplug unit from wall before installing or removing device or servicing unit.