Kramer Electronics, Ltd.
USER MANUAL
Models:
VP-200XLTHD XGA Line Amp/CAT 5 Transmitter
VP-5THD 1:4 VGA/UXGA Distributor/CAT 5 Transmitter
VP-5R CAT 5 Receiver/1:5 VGA/UXGA Distributor
Contents
Contents
1 Introduction 1
2 Getting Started 1
2.1 Quick Start 2
3 Overv
3.1 About the Power
iew 4
Connect™ Feature 4
3.2 Shielded Twisted Pair/Unshielded Twisted Pair 4
3.3 Recommendations for Achieving the Best Performance 5
4 Defining the VP-200XLTHD XGA Line Amp/CAT 5 Transmitter 6
5 Defining the V
P-5THD 1:4 VGA/UXGA Distributor/CAT 5 Transmitter 8
6 Defining the VP-5R CAT 5 Receiver/1:5 VGA/UXGA Distributor 10
7 Con
necting the VP-200XLTHD 11
8 Connecting the VP-5THD and the VP-5R 13
8.1 Wiring the CAT
5 LINE IN/LINE OUT RJ-45 Connectors 15
9 Technical Specifications 15
Figures
Figure 1: VP-200XLTHD XGA Line Amp/CAT 5 Transmitter 6
Figure 2: VP-200XLTHD XGA Line Amp/CAT 5 Transmitter Underside 7
Figure 3: VP-5THD 1:4 VGA/UXGA Distributor/CAT 5 Transmitter 8
Figure 4: VP-5THD 1:4 VGA/UXGA Distributor/CAT 5 Transmitter Underside 9
Figure 5: VP-5R CAT 5 Receiver/1:5 VGA/UXGA Distributor 10
Figure 6: VP-5R CAT 5 Receiver/1:5 VGA/UXGA Distributor Underside 11
Figure 7: Connecting the VP-200XLTHD 12
Figure 8: Connecting the VP-5THD and the VP-5R 14
Figure 9: TP Connector 15
Tables
Table 1: VP-200XLTHD XGA Line Amp/CAT 5 Transmitter Features 7
Table 2: VP-200XLTHD XGA Line Amp/CAT 5 Transmitter Underside Features 7
Table 3: VP-5THD 1:4 VGA/UXGA Distributor/CAT 5 Transmitter Features 9
Table 4: VP-5THD 1:4 VGA/UXGA Distributor/CAT 5 Transmitter Underside Features 9
Table 5: VP-5R CAT 5 Receiver/1:5 VGA/UXGA Distributor Features 10
Table 6: VP-5R CAT 5 Receiver/1:5 VGA/UXGA Distributor Underside Features 11
Table 7: TP Connector Pinout 15
Table 8: Technical Specifications of the VP-200XLTHD (with 30m CAT 5 cable) 15
Table 9: Technical Specifications of the VP-5THD (with 60m CAT 5 cable) 16
Table 10: Technical Specifications of the VP-5R (with 30m CAT 5 cable) 16
i
Introduction
1 Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creative, and affordable solutions to the vast range of
problems that confront the video, audio, presentation, and broadcasting
professional on a daily basis. In recent years, we have redesigned and upgraded
most of our line, making the best even better! Our 1,000-plus different models now
appear in 11 groups
1
that are clearly defined by function.
Thank you for purchasing the Kramer: VP-200XLTHD
Transmitter, VP-5THD
CAT 5 Receiver/1:5 VGA/UXGA Distributor which are ideal for:
VP-5R
1:4 VGA/UXGA Distributor/CAT 5 Transmitter, and/or
XGA Line Amp/CAT 5
• Presentation and multimedia applications
• Long range graphics distribution for schools, hospitals, security, and stores
The package includes:
• One or more VP-200XLTHD,
• Power cord
• This user manual
2
3
and/or VP-5THD, and/or VP-5R
2 Getting Started
We recommend that you:
• Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
• Review the contents of this user manual
• Use Kramer high-performance high-resolution cables
4
1 GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Matrix Switchers; GROUP 3: Control Systems;
GROUP 4: Format/Standards Converters; GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products;
GROUP 7: Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity;
GROUP 10: Accessories and Rack Adapters; GROUP 11: Sierra Products
2 We recommend that you use only the power cord supplied with this device
3 Download up-to-date Kramer user manuals from http://www.kramerelectronics.com
4 The complete list of Kramer cables is available at http://www.kramerelectronics.com
1
Getting Started
2.1 Quick Start
This quick start chart summarizes the basic setup and operation steps.
2
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Getting Started
3
Overview
3 Overview
This user manual describes the following products:
• Kramer TOOLS VP-200XLTHD
accepts one computer graphics input and distributes the signal to its 15-pin HD
connector output, as well as transmitting it over STP cabling (CAT 5 or
similar) to its appropriate receiver (see Section
• Kramer VP-5THD
1:4 VGA/UXGA Distributor/CAT 5 Transmitter, which is a
distributor for computer graphics sign als, accepting one input, and distributing
the signal to its identical 4 outputs, as well as transmitting it over CAT 5 STP
cable to its appropriate receiver (see Section
• Kramer VP-5R
CAT 5 Receiver/1:5 VGA/UXGA Distributor, which is a
distributor for computer graphics signals, receiving the computer graphics
signal via CAT 5 STP cable, and distributing the signal to 5 identical 15-pin
HD outputs (see Section
6 )
This section describes:
• The Power Connect feature (see Section
• Using Shielded Twisted Pair/Unshielded Twisted Pair cable (see Section
• Recommendations for achieving the best performance (see Section
3.1 About the Power Connect™ Feature
XGA Line Amp/CAT 5 Transmitter, which
4 )
5 )
3.1)
3.2)
3.3)
The
Power Connect feature applies as long as the cable can carry power. This
feature is available when using STP cable and the distance does not exceed 50m on
standard CAT 5 cable. For longer distances, heavy gauge cable should be used
For units which are connec t ed via RJ-45 connectors, make sure that the shield of
the STP cable is connected to the metal casing of the connectors on both ends of
the cable. For units which are connected via terminal block connectors, the shield
of the STP cable must be connected to a ground terminal on the units at both ends
(use the ground terminal of the power supply connection if necessary).
For a CAT 5 cable exceeding a distance of 50m, separate power supplies should
be connected to the transmitter and to the receiver simultaneous ly.
3.2 Shielded Twisted Pair/Unshielded Twisted Pair
recommend that you use Shielded Twisted Pair (STP) cable. There are
We
different levels of STP cable available, and we advise you to use the best quality
STP cable that you can afford. Our non-skew-free cable, Kramer BC-STP is
intended for analog signals where skewing is not an issue. For cases where there is
1 CAT 5 cable is still suitable for the video/audio transmission, but not for feeding the power at these distances
4
KRAMER: SIMPLE CREATIVE TECHNOLOGY
1
.
Overview
skewing, our UTP skew-free cable, Kramer BC-XTP, may be used. Bear in mind,
though, that we advise using STP cables where possible, since the compliance to
electromagnetic interference was tested using those cables.
Although Unshielded Twisted Pair (UTP) cable might be preferred for long range
applications, the UTP cable should be installed far away from electric cables, motors
and so on, which are prone to create electrical interference.
However, since the use of UTP cable might cause inconform ity to electromagnetic
standards, Kramer does not commit to meeting the standard with UTP cable.
3.3 Recommendations for Achieving the Best Performance
hieve the best performance:
To ac
• Use only good quality connection cables
1
to avoid interference, deterioration
in signal quality due to poor matching, and elevated noise levels (often
associated with low quality cables).
• Avoid interference from neighboring electrical appliances that may adversely
influence signal quality and position your Kramer product away from
moisture, excessive sunlight and dust
1 Available from Kramer Electronics on our Web site at http://www.kramerelectronics.com
5
Defining the VP-200XLTHD XGA Line Amp/CAT 5 Transmitter
4 Defining the VP-200XLTHD XGA Line Amp/CAT 5 Transmitter
The VP-200XLTHD is a high-performance XGA line amp/CAT 5 transmitter that
accepts one computer graphics (XGA) input, provides necessary buffering and
isolation, and distributes the signal to the 15-pin HD connector output, as well as
transmitting it over STP cable to its appropriate receiver.
In particular, the VP-200XLTHD:
• Can also accept HD signals (high-definition resolutions: 480p, 576p, 720p,
1080i and 1080p)
• Has a transmission range of more than 300ft (100m) over STP cabling
• Has a video bandwidth exceeding 400MHz, ensuring transparency even when
operating at the highest resolutions
• Includes output level control and cable equalization control, via two trimmers
on the front panel of the unit
Figure 1
and Table 1 define the VP-200XLTHD.
Figure 1: VP-200XLTHD XGA Line Amp/CAT 5 Transmitter
6
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Defining the VP-200XLTHD XGA Line Amp/CAT 5 Transmitter
Table 1: VP-200XLTHD XGA Line Amp/CAT 5 Transmitter Features
# Feature Function
1
12V DC
2 LINE OUT RJ-45 Connector Connect to1 the LINE IN RJ-45 connector o n t h e TP-1202 or the VP-5R
3 XGA OUT 15 -pin HD Connector Connect to the XGA acceptor
4 INPUT 15 - p i n H D Co nn e c t or Connect to the XGA source
5 LEVEL trimmer Turn to adjust3 the output signal level
6 EQ. trimmer Turn to adjust3 the video EQ. (equalization) compensation
7 ON LED Lights when the VP-200XLTHD receives power
Connect to the 12V DC power adapter
Figure 2 and Table 2 define the VP-200XLTHD.
Figure 2: VP-200XLTHD XGA Line Amp/CAT 5 Transmitter Underside
Table 2: VP-200XLTHD XGA Line Amp/CAT 5 Transmitter Underside Features
Switch Function
VS Switch Slide the switch downward to change the VS polarity to negative polarity4; slide the
HS Switch Slide the switch downward to change the HS polarity to negative polarity4; slide the
switch upward to retain the polarity (default)
switch upward to retain the polarity (default)
1 Using an STP CAT 5 cable with RJ-45 connectors at both ends (the pinout is defined in Table 7 and Figure 9)
2 Refer to the separate user manual: PT-110, PT-120, TP-120, WP-110 available at http://www.kramerelectronics.com
3 Insert a screwdriver into the hole and carefully rotate it, to trim the level
4 Downgoing syncs
7
Defining the VP-5THD 1:4 VGA/UXGA Distributor/CAT 5 Transmitter
5 Defining the VP-5THD 1:4 VGA/UXGA Distributor/CAT 5
Transmitter
The VP-5THD is a high-performance distributor for computer graphics signals,
accepting one input, providing necessary buffering and isolation, and distributing
the signal to its four identical outputs, as well as transmitting it over STP CAT 5
cable to an appropriate receiver.
In particular, the VP-5THD:
• Features front panel EQ. control
• Has switches on the underside for ID Bit control
• Has a video bandwidth exceeding 440MHz, ensuring transparency even when
operating at the highest resolutions
• Has a transmission range of more than 300ft (more than 100m) over STP cabling
• Is mains fed and housed in a half-width 19" enclosure
• Has Hs and Vs polarity switches on its underside
• Supports HD signals (high-definition resolutions: 720p, 108 0i and 1080p) and
SD signals
Figure 3
and Table 3 define the VP-5THD.
Figure 3: VP-5THD 1:4 VGA/UXGA Distributor/CAT 5 Transmitter
8
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Defining the VP-5THD 1:4 VGA/UXGA Distributor/CAT 5 Transmitter
Table 3: VP-5THD
# Feature Function
1 POWER Switch Illuminated switch for turning the unit ON or OFF
2 EQ. Trimmer Turn to adjust1 the video EQ. (equalization) compensation
3 INPUT 15-p i n H D Co nn e c t or Connect to the VGA/UXGA source
4 CAT 5 OUT RJ-45 Connector Connect to2 the LINE IN RJ-45 connector o n t h e V P - 5 R
5 OUTPUT 15-pin HD Connector Connect to the VGA/UXGA acceptor(s) (from 1 to 4)
6 Power Connector with Fuse Connect to the AC mains using the supplied power cable
1:4 VGA/UXGA Distributor/CAT 5 Transmitter Features
Figure 4 and Table 4 define the underside of the VP-5THD 1:4 VGA/UXGA
Distributor/CAT 5 Transmitter.
Figure 4: VP-5THD 1:4 VGA/UXGA Distributor/CAT 5 Transmitter Underside
Table 4: VP-5THD 1:4 VGA/UXGA Distributor/CAT 5 Transmitter Underside Features
# Feature Function
1
ID BIT CONTROL
2
Switches
3
POLARITY
Switches
4 HS Switch Slide the switch to the right to change the HS polarity to negative polarity4;
PIN 11
PIN 4
VS Switch Slide the switch to the right to change the VS polarity to negative polarity4;
Slide to the left to set to ON3; to the right to set to OFF
Slide to the left to set to ON3; to the right to set to OFF
slide the switch to the left to retain the polarity (default)
slide the switch to the left to retain the polarity (default)
1 Insert a screwdriver into the hole and carefully rotate it, to trim the level
2 Using an STP CAT 5 cable with RJ-45 connectors at both ends (the pinout is defined in Table 7
3 The default. Enabling the notebook or laptop to output a VGA signal to an external VGA monitor
4 Downgoing syncs
and Figure 9)
9
Defining the VP-5R CAT 5 Receiver/1:5 VGA/UXGA Distributor
6 Defining the VP-5R CAT 5 Receiver/1:5 VGA/UXGA Distributor
The VP-5R is a high-performance distributor for computer graphics signals,
receiving the computer graphics signal via STP CAT 5 cable, and distributing the
signal to five identical 15-pin HD outputs.
In particular, the VP-5R:
• Features front panel line input level and EQ. control, as well as output EQ.
control
• Is mains fed
• Is housed in a half-width 19" enclosure
Figure 5
and Table 5 define the VP-5R.
Figure 5: VP-5R CAT 5 Receiver/1:5 VGA/UXGA Distributor
Table 5: VP-5R CAT 5 Receiver/1:5 VGA/UXGA Distributor Features
# Feature Function
1 POWER Switch Illuminated switch for turning the unit ON or OFF
2 LINE INPUT LEVEL Trimmer Turn to adjust1 the video input level
3 LINE INPUT EQ. Trimmer Turn to adjust1 the video input EQ. (equalization) compensation
4 OUTPUT EQ. Trimmer Turn to adjust1 the video output EQ. (equalization) compensation
5 CAT 5 LINE IN RJ-45 Connector Connect to2 the LINE OUT RJ -45 connector on the VP-5THD
6 OUTPUT 15-pin HD Connector Connect to the VGA/UXGA acceptor(s) (from 1 to 5)
7 Power Connector with Fuse Connect to the AC mains using the supplied power cable
1 Insert a screwdriver into the hole and carefully rotate it, to trim the level
2 Using an STP CAT 5 cable with RJ-45 connectors at both ends (the pinout is defined in Table 7
10
KRAMER: SIMPLE CREATIVE TECHNOLOGY
and Figure 9)
Connecting the VP-200XLTHD
Figure 6 and Table 6 define the underside of the VP-5R CAT 5 Receiver/1:5
VGA/UXGA Distributor.
Figure 6: VP-5R CAT 5 Receiver/1:5 VGA/UXGA Distributor Underside
Table 6: VP-5R CAT 5 Receiver/1:5 VGA/UXGA Distributor Underside Features
# Feature Function
1 V SYNC Switch Slide the switch to the right1 to change the V SYNC polarity;
2 H SYNC Switch Slide the switch to the right1 to change the H SYNC polarity;
slide the switch to the left to retain the polarity
slide the switch to the left to retain the polarity
7 Connecting the VP-200XLTHD
You can use the VP-200XLTHD and, for example, the TP-120 to configure an XGA
line-to-Twisted Pair transmitter and receiver system.
To connect the VP-200XLTHD to the TP-120, as the example in Figure 7
illustrates:
1. On the VP-200XLTHD connect the:
Computer graphics (XGA) source (for example, a computer) to the
INPUT 15-pin HD connector
XGA OUT 15-pin HD connector to the acceptor (for example, to a
projector)
2. On the TP-120, connect the XGA OUT 15-pin HD connector to the XGA acceptor
(for example, a display).
1 By default, both switches are set to the left
11
Connecting the VP-200XLTHD
3. Connect the LINE OUT RJ-45 connector on the VP-200XLTHD to the LINE IN
RJ-45 connector on the TP-120 via STP ca bling (see Section
8.1).
4. Connect the 12V DC power adapter to the power socket on the VP-200XLTHD
and plug the adapter into the mains electricity socket.
5. Connect the other 12V DC power a dapter to the powe r socket on the TP-120, and
plug the adapter into the mains electricity socket.
6. On the VP-200XLTHD, if required, use a screwdriver to adjust the:
Video output signal level
Cable compensation equalization level
7. On the TP-120, if required:
Adjust
On the underside, set the H SYNC and V SYNC switches
1
the video output signal level and/or cable compensation
equalization level
2
Figure 7: Connecting the VP-200XLTHD
1 Use a screwdriver to carefully rotate the trimmer, adjusting the appropriate level
2 By default, both switches are set down (for normal V SYNC and H SYNC polarity)
12
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the VP-5THD and the VP-5R
8 Connecting the VP-5THD and the VP-5R
You can use the VP-5THD 1:4 VGA/UXGA Distributor/CAT 5 Transmitter and the
CAT 5 Receiver/1:5 VGA/UXGA Distributor to configure an XGA line-
VP-5R
to-Twisted Pair transmitter and receiver system.
To connect the VP-5THD to the VP-5R, as the example in Figure 8
1. On the VP-5THD connect the computer gra phics source (for example, a com puter)
to the INPUT 15-pin HD connect or, and connec t up to
1
four acceptors (for
illustrates:
example, local displays) to the OUTPUT 15-pin HD connectors 1 to 4.
1
2. On the VP-5R connect
up to five acceptors (for example, displays) to the
OUTPUT 15-pi n HD connect ors 1 to 5.
3. Connect the CAT 5 OUT RJ-45 connector on the VP-5THD to the CAT 5 LINE
IN RJ-45 connector on the VP-5R via STP cabling (see Section
2
4. Connect the supplied power cord
5. Connect the supplied power cord
6. On the VP-5THD, if required:
Set the H SYNC and V SYNC switches
Adjust
7. On the VP-5R, if required:
Adjust
5
the front panel cable compensation equalization level
5
the front panel LINE INPUT signal level and/or cable
to the VP-5THD3.
2
to the VP-5R3.
4
on the underside
8.1).
compensation equalization level, and/or OUTPUT compensation
equalization level
On the underside, set the V SYNC and H SYNC switches
2
1 When not all the outputs are required, connect only those that are required and leave the other output(s) unconnected
2 We recommend that you use only the power cord that is supplied with each specific unit
3 Not illustrated in Figure 8
4 By default, both switches are set down (for negative V Sync and H Sync polarity)
5 Use a screwdriver to carefully rotate the trimmer, adjusting the appropriate level
13
Connecting the VP-5THD and the VP-5R
14
Figure 8: Connecting the VP-5THD and the VP-5R
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Technical Specifications
8.1 Wiring the CAT 5 LINE IN/LINE OUT RJ-45 Connectors
Table 7
and Figure 9 define the TP CAT 5 pinout, using a straight pin to pin cable
with RJ-45 connectors. When using STP cabl e, c onne ct/s old er t he ca ble shiel d t o th e
RJ-45 connector shield.
Table 7: TP Connector Pinout
EIA /TIA 568A
PIN Wire Color PIN Wire Color
1 Green/White 1 Orange/White
2 Green 2 Orange
3 Orange/White 3 Green/White
4 Blue 4 Blue
5 Blue/White 5 Blue/White
6 Orange 6 Green
7 Brown/White 7 Brown/White
8 Brown 8 Brown
Pair 1 4 and 5 Pair 1 4 and 5
Pair 2 3 and 6 Pair 2 1 and 2
Pair 3 1 and 2 Pair 3 3 and 6
Pair 4 7 and 8 Pair 4 7 and 8
EIA /TIA 568B
Figure 9: TP Connector
9 Technical Specifications
Table 8 lists the technical specifications of the VP-200XLTHD.
Table 8: Technical Specifications1 of the VP-200XLTHD (with 30m CAT 5 cable)
INPUT: 1 XGA on a 15-pin HD connector
OUTPUTS: 1 XGA on a 15-pin HD connector; 1 RJ-45 connector
MAX. OUTPUT LEVEL2: 2.4Vpp (XGA), 1.5Vpp (CAT 5)
BANDWIDTH (-3dB): 405MHz (XGA)
RESOLUTION: Up to UXGA, up to 1080p
DIFF. GAIN2: 0.03% (XGA), 3.3% (CAT 5)
DIFF. PHASE2: 0.03Deg (XGA), 0.3Deg (CAT 5)
K-FACTOR2: <0.02% (XGA and CAT 5)
S/N RATIO2: 78dB (XGA), 7 1dB (CAT 5)
CONTROLS2: XGA: LEVEL: –1.6dB to +1.9dB; EQ.: 0 to 4dB @50MHz
COUPLING2: DC (XGA), AC (CAT 5)
POWER SOURCE: 12V DC, 105mA
DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7" x 2.95" x 0.98”) W, D, H
WEIGHT: 0.3kg (0.67lb) approx.
ACCESSORIES: Power supply
1 Specifications are subject to change without notice
2 For the VP-200XLTHD to TP-120 SETUP
15
Technical Specifications
Table 9 lists the technical specifications of the VP-5THD.
Table 9: Technical Specifications of the VP-5THD (with 60m CAT 5 cable)
INPUT: 1 XGA on a 15-pin HD connector
OUTPUTS: 4 XGA on 15-pin HD connectors; 1 RJ-45 connector
MAX. OUTPUT LEVEL1: 1.7Vpp (XGA), 1.7Vpp (CAT 5)
BANDWIDTH (-3dB): 445MHz (XGA), 154MHz (CAT 5)
RESOLUTION: Up to UXGA, up to 1080p2
DIFF. GAIN1: 0.8% (XGA), 3.2% (CAT 5)
DIFF. PHASE1: 0.08Deg (XGA), 0.06Deg (CAT 5)
K-FACTOR1: 0.1% (XGA), <0.05% (CAT 5)
S/N RATIO1: 76dB (XGA), 73dB (C AT 5)
CONTROLS1: LEVEL: –7.4dB to 3.5dB (CAT 5)
COUPLING1: DC (XGA), AC (CAT 5)
POWER SOURCE: 230 VAC, 50/60 Hz. (115VAC, U.S.A.) 13VA
DIMENSIONS: 22cm x 18cm x 4.5cm (8.7” x 7 ” x 1.7”) W, D, H (half 19”, 1U)
WEIGHT: 1.2kg (2.6 lbs) approx.
ACCESSORIES: Power cord
EQ.: 0 to 37.8dB @50MHz (CAT 5)
Table 10 lists the technical specifications of the VP-5R.
Table 10: Technical Specifications of the VP-5R (with 30m CAT 5 cable)
INPUT: 1 RJ-45 connector
OUTPUTS: 5 XGA on 15-pin HD connectors
MAX. OUTPUT LEVEL3: 1.4Vpp
BANDWIDTH (-3dB): 150MHz
DIFF. GAIN3: 3.4%
DIFF. PHASE3: 0.05Deg
K-FACTOR3: <0.05%
S/N RATIO3: 74dB
CONTROLS3: LEVEL: –8.2dB to 4.3dB
COUPLING3: AC
POWER SOURCE: 230V AC, 50/60 Hz. (115V AC, U.S.A.) 9.2VA
DIMENSIONS: 22cm x 18cm x 4.5cm (8.7” x 7” x 1.7”) W, D, H (half 19”, 1U)
WEIGHT: 1.2kg (2.6 lbs) approx.
ACCESSORIES: Power cord
LINE EQ.: 0 to 30dB; OUT EQ.: 0 to 8.6dB
1 For the VP-5THD to TP-120 SETUP
2 The HD resolutions apply to the HD version of the unit
3 For the VP-5R to WP-110 SETUP
16
KRAMER: SIMPLE CREATIVE TECHNOLOGY
LIMITED WARRANTY
Kramer El ec t ro ni c s (hereafter ) warran ts t hi s pr oduct free from defects in m at e r ial a nd workma nship under t he
following terms.
HOW LONG IS THE WARRANTY
Labor and parts are warranted for seven years from the date of the first customer purchase.
WHO IS PROTECTED?
Only the first purchase customer may enforce this warranty.
WHAT IS COVERED AND WHA T IS NO T COVERED
Except as below, this warranty covers all defects in material or workmanship in this product. The following are not covered
by the warranty:
1. Any product which is not distributed by Kramer, or which is not purchased from an authorized Kramer dealer. If you are
uncertain as to whether a dealer is authorized, please contact Kramer at one of the agents listed in the Web site
www.kramerelectronic s. com.
2. Any product, on which the serial number has been defaced, modified or removed, or on which the WARRANTY VOID
TAMPERED sticker has been torn,
IF reattached, removed or otherwise interfered with.
3. Damage, det erioratio n or ma lfunction resulting from:
i) Accident , misuse , abuse, ne glect, fi re, water , lightnin g or othe r acts of nat ure
ii) Product modification, or failure to follow instructions supplied with the product
iii) Repa ir or atte mpted re pair by anyo ne not au thorize d by Krame r
iv) Any shipment of the product (claims must be presented to the carrier)
v) Removal or insta llation of the pro duct
vi) Any other ca use, whic h does n ot relate t o a produ ct defec t
vii) Cartons, equipment enclosures, cables or accessories used in conjunction with the product
WHAT WE WILL PAY FOR AND WHAT WE WILL NOT PAY FOR
W e will pay l abor an d mater ial expense s for cov ered ite ms. W e wi ll not pa y for the followin g:
1. Removal or installations charges.
2. Co sts of initial technical adjustments (set-up), including adjustment of user controls or programming. These costs are the
responsi bility of the Kram er deal er from wh om the pr oduct w as purcha sed.
3. Shipping charges.
HOW YOU CAN GET WARRANTY SERVICE
1. To obtain service on you product, you must take or ship it prepaid to any authorized Kramer service center.
2. Whenever warranty service is required, the original dated invoice (or a copy) must be presented as proof of warranty
coverage, and should be included in any shipment of the product. Please also include in any mailing a contact name,
company, address, and a description of the problem(s).
3. For the name of the nearest Kramer authorized service center, consult your authorized dealer.
LIMITATION OF IMPLIED WARRANTIES
All implied warranties, including warranties of merchantability and fitness for a particular purpose, are limited in duration to
the length of this warra nty.
EXCLUSION OF DAMAGES
The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer shall
not be liabl e for:
1. Damage to other p roperty cau sed by defe cts in th is product , damages based upo n inconve nience , loss of use o f the produ ct, los s
of time, commercial loss; or:
2. Any other dam ages , whe ther inci den tal, c onseq uen tial o r o ther wise. Som e co untri es ma y n ot a llow limit ati ons o n ho w l ong an
implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so the above
limita tions a nd exc lusio ns may not a pply to you.
This warranty gives you specific legal rights, and you may al so have other rights, which vary from place to pla ce.
NOTE:
All products returned to Kramer fo r service must have prior approval. This m ay be obtained from your dealer .
This equipment has been tested to determine compliance with the requ irements of:
EN-50081: "Electromagnetic compatibility (EMC);
Residential, commercial and light industry"
EN-50082: "Electromagnetic compatibility (EMC) generic immunity st andard.
CFR-47: FCC* Rules and Regul ations:
CAUTION!
generic emission standard.
Part 1:
Part 1: Residential, commercial and light industry environment".
Part 15: “Radio frequency devices
Subpart B Unintentional radiators”
Servicing the machines can only be done by an authorized Kramer technician. Any user who makes changes or
modifications to the unit without the expressed approval of the manufacturer will v oid user authority to operate the
equipment.
Use the supplied DC power supply to feed power to the machine.
Please use recommended interconnection cables to connect the machine to other compo nents.
* FCC and CE approved u sing STP c able (for tw isted pai r products )
Kramer
17
For the latest information on our products and a list of Kramer
distributors visit
www.kramerelectronics.com
where updates to this user manual may be found.
We welcome your questions, comments and feedback.
Safety Warning:
Disconnect the unit from the power supply before
opening/servicing.
Caution
PN:
2900-000635
Rev:
2
Kramer Electronics, Ltd.
Web site: www.kramerelectronics.com
E-mail: info@kramerel.com
P/N: 2900-000635 REV 2
Loading...