Kramer Electronics, Ltd.
USER MANUAL
Model:
VP-200
XGA Line Amplifier / DA
XLN
Contents
Contents
1
Introduction 1
2
Getting Started 1
2.1 Quick Start 1
3
Overview 3
4
Your VP-200XLN XGA Line Amplifier / DA 4
5
Connecting the VP-200XLN XGA Line Amplifier / DA 6
6
Technical Specifications 7
Figures
Figure 1: VP-200XLN XGA Line Amplifier / DA 4
Figure 2: VP-200XLN (Top Side Panel) 4
Figure 3: VP-200XLN (Lower Side Panel) 4
Figure 4: VP-200XLN XGA Line Amplifier / DA (Underside) 5
Figure 5: Connecting the VP-200XLN XGA Line Amplifier / DA 6
Tables
Table 1: VP-200XLN XGA Line Amplifier / DA Features 5
Table 2: VP-200XLN XGA Line Amplifier / DA (Underside) Features 5
Table 3: Technical Specifications of the VP-200XLN XGA Line Amplifier / DA 7
i
Introduction
1 Introduction
Welcome to Kramer Electronics (since 1981): a world of unique, creative and
affordable solutions to the infinite range of problems that confront the video,
audio and presentation professional on a daily basis. In recent years, we have
redesigned and upgraded most of our line, making the best even better! Our
500-plus different models now appear in 8 Groups1, which are clearly defined
by function. Congratulations on purchasing your Kramer TOOLS
VP-200
XLN
XGA Line Amplifier / DA, which is ideal for:
Dual monitor systems, stores, and points of sale
Presentation systems
The package includes the following items:
VP-200
XLN
XGA Line Amplifier / DA
Power adapter (12V DC Input) and this user manual2
2 Getting Started
We recommend that you:
Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
Review the contents of this user manual
Use Kramer high performance high resolution cables3
2.1 Quick Start
This quick start chart summarizes the basic setup and operation steps.
1 GROUP 1: Distribution Amplifiers; GROUP 2: Video and Audio Switchers, Matrix Switchers and Controllers; GROUP 3:
Video, Audio, VGA/XGA Processors; GROUP 4: Interfaces and Sync Processors; GROUP 5: Twisted Pair Interfaces;
GROUP 6: Accessories and Rack Adapters; GROUP 7: Scan Converters and Scalers; and GROUP 8: Cables and Connectors
2 Download up-to-date Kramer user manuals from the Internet at this URL: http://www.kramerelectronics.com
3 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com
1
Getting Started
2
KRAMER: SIMPLE CREATIVE TECHNOLOGY
3 Overview
Overview
The high performance VP-200
XLN
is a 1:2 line amplifier / distribution
amplifier for XGA1 computer graphics signals that accepts one input, provides
correct buffering and isolation, and then distributes the signal to two identical
outputs.
In particular, the VP-200
XLN
XGA Line Amplifier / DA includes:
High-density 15 pin D connectors
Video bandwidth of 400MHz, ensuring that it remains transparent for all
resolutions
Separate controls for output level and cable equalization; ID Bit control,
and independent DC or AC coupling for red, green and blue
Achieving the best performance means:
Connecting only good quality connection cables, thus avoiding
interference, deterioration in signal quality due to poor matching, and elevated
noise levels (often associated with low quality cables)
Avoiding interference from neighboring electrical appliances and
positioning your VP-200
XLN
away from moisture, excessive sunlight and dust
1 The terminology XGA is used throughout this manual, where this implies any RGBHV signal on an HD15 connector
having a resolution from VGA up to UXGA
3
Your VP-200xln XGA Line Amplifier / DA
4 Your VP-200
XLN
XGA Line Amplifier / DA
Figure 1, Figure 2, Figure 3 and Table 1 define the VP-200
Figure 1: VP-200XLN XGA Line Amplifier / DA
XLN
:
Figure 2: VP-200XLN (Top Side Panel)
Figure 3: VP-200XLN (Lower Side Panel)
4
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your VP-200xln XGA Line Amplifier / DA
Table 1: VP-200
# Feature Function
1 12V DC +12V DC connector for powering the unit
2 OUTPUT 2 HD15F Connector Connect to the computer graphics acceptor 2
3 OUTPUT 1 HD15F Connector Connect to the computer graphics acceptor 1
4 LEVEL Control Potentiometer Adjusts1 the video signal level
5 EQ. Control Potentiometer Adjusts1 the video EQ. (equalization) compensation
6 INPUT HD15F Connector Connect to the computer graphics source
7 ON LED Illuminates when receiving power
XLN XGA Line Amplifier / DA Features
Figure 4 and Table 2 define the underside of the VP-200
Figure 4: VP-200XLN XGA Line Amplifier / DA (Underside)
Table 2: VP-200XLN XGA Line Amplifier / DA (Underside) Features
# Feature Function
1 ID Bit Switch Slide to the left to
2 BLUE
3 GREEN
4
Switch
Switch
RED
COUPLING
Switch
set to ON2; to the
right to set to OFF
Slide up to set to
DC; down to set to
AC
XLN
:
1 Use a screwdriver to rotate the potentiometer, adjusting the appropriate level
2 The default. Enabling the notebook or laptop to output a VGA signal to an external VGA monitor
5
Connecting the VP-200xln XGA Line Amplifier / DA
5 Connecting the VP-200
To connect your VP-200
XLN
XGA Line Amplifier / DA
XLN
XGA Line Amplifier / DA, as the example in
Figure 5 illustrates, do the following1:
1. Connect a computer graphics source (for example, a computer) to the
INPUT HD15F connector.
2. Connect the OUTPUT HD15F connectors to up to 2 acceptors, as follows:
Connect the OUTPUT 1 to the acceptor 1 (for example, a projector)
Connect the OUTPUT 2 to the acceptor 2 (for example, a display)
3. Connect the 12V DC power adapter (wall transformer) to the 12V DC
socket and connect the transformer to the mains electricity.
4. If required, adjust2 the video output signal level and/or cable
compensation equalization level, and/or set the:
Red, green and blue coupling switches on the underside to DC or AC
ID Bit switch to ON
Figure 5: Connecting the VP-200XLN XGA Line Amplifier / DA
1 Switch OFF the power on each device before connecting it to your VP-200
on the power on each device
2 Use a screwdriver to rotate the potentiometer, adjusting the appropriate level
6
XLN
. After powering up your VP-200
KRAMER: SIMPLE CREATIVE TECHNOLOGY
XLN
, switch
Technical Specifications
6 Technical Specifications
Table 3 includes the technical specifications:
Table 3: Technical Specifications1 of the VP-200XLN XGA Line Amplifier / DA
INPUT:
OUTPUTS:
MAX. OUTPUT LEVEL: 2Vpp
BANDWIDTH (-3dB): 400MHz
DIFF. GAIN: 0.05%
DIFF. PHASE: 0.03°
K-FACTOR: <0.05%
S/N RATIO: 71dB
CONTROLS: Level: –1.5dB to +6.1dB, EQ.: 0 to +7.3dB @ 50MHz
COUPLING: AC/DC
POWER SOURCE: 12 VDC, 95mA
DIMENSIONS: 12cm x 7.15cm x 2.76cm (4.7" x 2.8" x 1.08"), W, D, H
WEIGHT: 0.3 kg. (0.67 lbs.) approx.
ACCESSORIES: Power supply, mounting bracket
OPTIONS: 19" rack adapters RK-T1, RK-T3
1 XGA on an HD15F connector
2 XGA on HD15F connectors
1 Specifications are subject to change without notice
7
LIMITED WARRANTY
Kramer Electronics (hereafter Kramer) warrants this product free from defects in material and workmanship under the
following terms.
HOW LONG IS THE WARRANTY
Labor and parts are warranted for seven years from the date of the first customer purchase.
WHO IS PROTECTED?
Only the first purchase customer may enforce this warranty.
WHAT IS COVERED AND WHAT IS NOT COVERED
Except as below, this warranty covers all defects in material or workmanship in this product. The following are not covered
by the warranty:
1. Any product which is not distributed by Kramer, or which is not purchased from an authorized Kramer dealer. If you are
uncertain as to whether a dealer is authorized, please contact Kramer at one of the agent s listed in the web site
www.kramerelectronics.com.
2. Any product, on which the serial number has been defaced, modified or removed.
3. Damage, deterioration or malfunction result ing from:
i) Accident, misuse, abuse, neglect, fire, water, lightning or other acts of nature
ii) Product modification, or failure to follow instructions supplied with the product
iii) Repair or attempted repair by anyone not authorized by Kramer
iv) Any shipment of the product (claims must be presented to the carrier)
v) Removal or installation of the product
vi) Any other cause, which does not relate to a product defect
vii) Carto ns, equipment enclosures, cables or accessories used in conjunction with the product
WHAT WE WILL PAY FOR AND WHAT WE WILL NOT PAY FOR
We will pay labor and material expenses for covered items. We will not pay for the following:
1. Removal or installations charges.
2. Costs of initial technical adjustments (set-up), including adjustment of user controls or programming. These costs are the
responsibility of the Kramer dealer from whom the product was purchased.
3. Shipping charges.
HOW YOU CAN GET WARRANTY SERVICE
1. To obtain service on you product, you must take or ship it prepaid to any authorized Kramer service c enter.
2. Whenever warranty service is required, the original dated invo ice (or a copy) must be presented as proof o f warranty coverage,
and should be included in any shipment of the product. Please also include in any mailing a contact name, company, address, and
a description of the problem(s).
3. For the name of the nearest Kramer authorized service center, consult your authorized dealer.
LIMITATION OF IMPLIED WARRANTIES
All implied warranties, including warranties of merchantability and fitness for a particular purpose, are limited in duration to
the length of this warranty.
EXCLUSION OF DAMAGES
The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer
shall not be liable for:
1. Damage to other property caused by defects in this product, damages based upon inconvenience, loss o f use of t he product, loss
of time, commercial loss; or:
2. Any other damages, whether incide ntal, consequential or ot herwise. Some countries may no t allow limitat ions on how long an
implied warranty lasts and/or do not allow the exclusion or limitat ion of incidental or consequential da mages, so the above
limitations and exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights, which vary from place to place.
NOTE: All products returned to Kramer for service must have prior approval. This may be obtained from your dealer.
This equipment has been tested to determine compliance with the requirements of:
EN-50081: "Electromagnetic compatibility (EMC);
EN-50082: "Electromagnetic compatibility (EMC) generic immunity standard.
CFR-47: FCC Rules and Regulations:
CAUTION!
Servicing the machines can only be done by an authorized Kramer technician. Any user who makes changes or modifications to
the unit without the expressed approval of the manufacturer will void user authority to operate the equipment.
Use the supplied DC power supply to feed power to the machine.
Please use recommended interconnection cables to connect the machine to other components.
generic emission standard.
Part 1: Residential, commercial and light industry"
Part 1: Residential, commercial and light industry environment".
Part 15: “Radio frequency devices
Subpart B – Unintentional radiators”
8
KRAMER: SIMPLE CREATIVE TECHNOLOGY
For the latest information on our products and a list of Kramer
distributors, visit our Web site: www.kramerelectronics.com,
where updates to this user manual may be found.
We welcome your questions, comments and feedback.
Safety Warning:
Disconnect the unit from the power supply before
opening/servicing.
Caution
Kramer Electronics, Ltd.
Web site: www.kramerelectronics.com
E-mail: info@kramerel.com
P/N: 2900-000207 REV 1
Loading...