Page 1
Kramer Electronics, Ltd.
USER MANUAL
VM-20HD
Dual 1:10 HD/SD – SDI Distribution Amplifier
Page 2
Contents
Contents
1
Introduction 1
2
Getting Started 1
2.1 Quick Start 1
3
Overview 3
4
Your VM-20HD Dual 1:10 HD/SD - SDI Distribution Amplifier 3
5
Installing the VM-20HD on a Rack 6
6
Connecting the VM-20HD Dual 1:10 HD/SD - SDI Distribution Amplifier 7
7
Technical Specifications 8
Figures
Figure 1: VM-20HD Dual 1:10 HD/SD - SDI Distribution Amplifier 4
Figure 2: Connecting the VM-20HD Dual 1:10 HD/SD - SDI Distribution Amplifier 7
Tables
Table 1: VM-20HD Dual 1:10 HD/SD - SDI Distribution Amplifier Features 5
Table 2: Technical Specifications of the VM-20HD 8
i
Page 3
Introduction
1 Introduction
Welcome to Kramer Electronics (since 1981): a world of unique, creative and
affordable solutions to the infinite range of problems that confront the video,
audio and presentation professional on a daily basis. In recent years, we have
redesigned and upgraded most of our line, making the best even better! Our
500-plus different models now appear in 8 Groups1, which are clearly defined
by function.
Congratulations on purchasing your Kramer VM-20HD Dual 1:10 HD2/SD3 SDI Distribution Amplifier, which is ideal for:
SDI production studios for signal distribution
Broadcast studios for on-air operation
SDI field production
Using with SDI video sources such as professional digital cameras
The package includes the following items:
VM-20HD Dual 1:10 HD/SD - SDI Distribution Amplifier
Power cord
This user manual4
2 Getting Started
We recommend that you:
Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
Review the contents of this user manual
Use Kramer high performance high resolution cables5
2.1 Quick Start
This quick start chart summarizes the basic setup and operation steps.
1 GROUP 1: Distribution Amplifiers; GROUP 2: Video and Audio Switchers, Matrix Switchers and Controllers; GROUP 3 :
Video, Audio, VGA/XGA Processors; GROUP 4: Interfaces and Sync Processors; GROUP 5: Twisted Pair Interfaces;
GROUP 6: Accessories and Rack Adapters; GROUP 7: Scan Converters and Scalers; and GROUP 8: Cables and Connectors
2 High Definition (HD) means a video format, consisting of either 720 active lines of progressive video or 1080 lines of either
progressive or interlaced video
3 Standard Definition (SD) means an NTSC or PAL compatible video format, consisting of 480 (for NTSC) or 576 (for PAL)
lines of interlaced video
4 Download up-to-date Kramer user manuals from the Internet at this URL: http://www.kramerelectronics.com
5 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com
1
Page 4
Getting Started
2
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Page 5
Overview
3 Overview
The VM-20HD Dual 1:10 HD/SD - SDI Distribution Amplifier is a high
performance dual channel distribution amplifier for SDI (SMPTE 259M and
SMPTE 344M) and HD-SDI (SMPTE 292M) signals. It will take one input
per channel, provide reclocking and equalization and distribute each signal to
10 outputs, using BNC connectors.
In particular, the VM-20HD:
Can be configured as a 1:20 DA
Has an active loop BNC connector on each channel, for cascading
additional units
Has a video bandwidth of 1.485Gbps that allows it to be used for standard
definition and high definition serial digital video signals (SD/HD-SDI)
Is SMPTE 259M, 292M and 344M compliant
Supports data rates of 270, 1483.5, and 1485Mbps
Provides automatic, multi-rate, equalization and reclocking for losses
typical with long runs of 75 co-axial cable
Has HD and SD output indication LEDs for each channel
To achieve the best performance:
Connect only good quality connection cables, thus avoiding
interference, deterioration in signal quality due to poor matching,
and elevated noise- levels (often associated with low quality cables)
Avoid interference from neighboring electrical appliances and position
your Kramer VM-20HD away from moisture, excessive sunlight and dust
4 Your VM-20HD Dual 1:10 HD/SD - SDI Distribution Amplifier
Figure 1 and Table 1 define the VM-20HD Dual 1:10 HD/SD - SDI
Distribution Amplifier:
3
Page 6
Your VM-20HD Dual 1:10 HD/SD - SDI Distribution Amplifier
Figure 1: VM-20HD Dual 1:10 HD/SD - SDI Distribution Amplifier
4
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Page 7
Your VM-20HD Dual 1:10 HD/SD - SDI Distribution Amplifier
Table 1: VM-20HD Dual 1:10 HD/SD - SDI Distribution Amplifier Features
# Feature Function
1 POWER Switch Illuminated switch for turning the unit ON or OFF
2 SD1 LED The green LED lights when the SDI signal in channel A is SD
CHANNEL A
3
4 HD2 LED The blue LED lights when the SDI signal in channel B is HD
CHANNEL B
5
6 VIDEO IN Connects to the channel B SDI source
CHANNEL B
7 LOOP Connects the channel B input to the video input of an
8
9 VIDEO IN Connects to the channel A SDI source
10 LOOP Connects the channel A input to the video input of an
11
12 Power Connector with Fuse AC connector enabling power supply to the unit
BNC
Connectors
CHANNEL A
BNC
Connectors
HD2 LED The blue LED lights when the SDI signal in channel A is HD
SD1 LED The green LED lights when the SDI signal in channel B is SD
additional unit or to the channel A video input3
VIDEO
OUTPUTS
VIDEO
OUTPUTS
Connects to the channel B SDI acceptors (from 1 to 10)
additional unit or to the channel B video input3
Connects to the channel A SDI acceptors (from 1 to 10)
1 Standard Definition (SD) means an NTSC or PAL compatible video format, consisting of 480 (for NTSC) or 576 (for PAL)
lines of interlaced video
2 High Definition (HD) means a video format, consisting of either 720 active lines of progressive video or 1080 lines of either
progressive or interlaced video
3 To create a 1:20 distribution amplifier (connect the LOOP output of one of the channels to the VIDEO IN of the other
channel)
5
Page 8
Installing the VM-20HD on a Rack
Before Installing on a Rack
5 Installing the VM-20HD on a Rack
This section describes what to do before installing on a rack and how to rack
mount.
How to Rack Mount
Before installing on a rack, be sure that the environment is
within the recommended range:
Operating temperature range +5 to +45 Deg. Centigrade
Operating humidity range
Storage temperature range
Storage humidity range
When installing on a 19" rack, avoid hazards by taking
care that:
It is located within the recommended environmental
1
conditions, as the operating ambient temperature of a
closed or multi unit rack assembly may exceed the
room ambient temperature.
Once rack mounted, enough air will still flow around the
2
machine.
The machine is placed straight in the correct horizontal
3
position.
You do not overload the circuit(s). When connecting
4
the machine to the supply circuit, overloading the
circuits might have a detrimental effect on overcurrent
protection and supply wiring. Refer to the appropriate
nameplate ratings for information. For example, for
fuse replacement, see the value printed on the product
label.
The machine is earthed (grounded) in a reliable way
5
and is connected only to an electricity socket with
grounding. Pay particular attention to supply
connections other than direct connections to the
branch circuit (for example, the use of power strips),
and that you use only the power cord that is supplied
with the machine.
5 to 65% RHL, non-condensing
-20 to +70 Deg. Centigrade
5 to 95% RHL, non-condensing
CAUTION!!
To rack-mount a machine:
1
Attach both ear brackets to the
machine. To do so, remove the
screws from each side of the machine
(3 on each side), and replace those
screws through the ear brackets.
Place the ears of the machine
2
against the rack rails, and insert the
proper screws (not provided) through
each of the four holes in the rack
ears.
Note that:
In some models, the front panel
may feature built-in rack ears
Detachable rack ears can be removed
for desktop use
Always mount the machine in the rack
before you attach any cables or
connect the machine to the power
If you are using a Kramer rack adapter
kit (for a machine that is not 19"), see
the Rack Adapters user manual for
installation instructions (you can
download it at:
http://www.kramerelectronics.com)
6
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Page 9
Connecting the VM-20HD Dual 1:10 HD/SD - SDI Distribution Amplifier
6 Connecting the VM-20HD Dual 1:10 HD/SD - SDI Distribution
Amplifier
To connect the VM-20HD, as the example in Figure 2 illustrates, do the following1:
1. Connect an HD-SDI/SD-SDI video source (for example, an HD/SD SDI
camera) to the CHANNEL A VIDEO IN BNC connector.
2. Connect the CHANNEL A LOOP BNC connector to the CHANNEL B
VIDEO IN BNC connector.
3. Connect up to2 20 VIDEO OUTPUT BNC connectors to the appropriate
HD/SD SDI video acceptors (for example, HD/SD SDI displays).
4. Connect the power cord (not illustrated in Figure 2).
Figure 2: Connecting the VM-20HD Dual 1:10 HD/SD - SDI Distribution Amplifier
1 Switch OFF the power on each device before connecting it to your VM-20HD. After connecting your VM-2 0HD, switch on
its power and then switch on the power on each device
2 You do not have to connect all the outputs, connect only those that are required and leave the other output(s) unconnected
7
Page 10
Technical Specifications
7 Technical Specifications
Table 2 includes the technical specifications:
Table 2: Technical Specifications1 of the VM-20HD
INPUTS: 2 SMPTE-259M, 292M, 344M serial video, 75 ohms on a BNC
OUTPUTS: 22 equalized and reclocked SMPTE-259M, 292M, 344M outputs,
RESOLUTION: 8 and 10-bits (automatic)
MAX. OUTPUT LEVEL: 800mVpp /75 ohms
MAX. BAUD RATE: 1.485Gbps
COUPLING: AC
POWER SOURCE:
DIMENSIONS: 19-inch (W), 7-inch (D), 1U (H)
WEIGHT: 1.5kg. (3.3lbs.) approx.
ACCESSORIES: Power cord
connector
75 ohms on BNC connectors
100240VAC; 50/60Hz, 9VA
1 Specifications are subject to change without notice
8
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Page 11
Except as below, this warranty covers all defects in material or workmanship in this product. The following are not covered
uncertain as to whether a dealer is authorized, please contact Kramer at one of the agents listed in the Web site
LIMI TED WARRAN TY
Kramer Electronics (hereafter ) warrants this product free from defects in material and workmanship under the
following terms.
HOW LONG IS THE WARRAN TY
Labor and parts are warranted for seven years from the date of the first customer purchase.
WHO IS PROTECT ED?
Only the first purchase customer may enforce this warranty.
WHAT IS COVERED AND WHAT IS NOT COVERED
by the warranty:
1. A ny product which is not distributed by Kramer, or which is not purchased from an authorized Kramer dealer. If you are
www.kramerelectronics.com.
2. Any product, on which the serial number has been defaced, modified or removed.
3. Damage, deterioration or malfunction resulting from:
i) Accident, misuse, abuse, neglect, fire, water, lightning or other acts of nature
ii) Product modification, or failure to follow instructions supplied with the product
iii) Repair or attempted repair by anyone not authorized by Kramer
iv) Any shipment of the product (claims must be presented to the carrier)
v) Removal or installation of the product
vi) Any other cause, which does not relate to a product defect
vii) Cartons, equipment enclosures, cables or accessories used in conjunction with the product
WHAT WE WILL PAY FOR AND WHAT WE WILL NOT PAY FOR
We will pay labor and material expenses for covered items. We will not pay for the following:
1. Removal or installations charges.
2. Costs of i nitial technical adjustments (set-up), including adjustment of user controls or programming. These costs are the
responsibility of the Kramer dealer from whom the product was purchased.
3. Shipping charges.
HOW YOU C AN GET WARRANTY SERVI CE
1. To obtain service on you product, you must take or ship it prepaid to any authorized Kramer service center.
2. Whenever warranty service is required, the original dated invoice (or a copy) must be presented as proof of warranty
coverage, and should be included in any shipment of the product. Please also include in any mailing a contact name,
company, address, and a description of the problem(s).
3. For the name of the nearest Kramer authorized service center, consult your authorized dealer.
LIMI TATION OF IMPLIE D WARRANT IES
All implied warranties, including warranties of merchantability and fitness for a particular purpose, are limited in duration to
the length of this warranty.
EXCLUSIO N OF DAMAGES
The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer shall
not be liable for:
1. Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss
of time, commercial loss; or:
2. Any other damages, whether incidental, consequential or otherwise. Some countries may not allow limitations on how long an
implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitations and exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights, which vary from place to place.
All products returned to Kramer for service must have prior approval. This may be obtained from your dealer.
NOTE:
This equipment has been tested to determine compliance with the requirements of:
EN-50081: "Electromagnetic compatibility (EMC);
Residential, commercial and light industry"
EN-50082: "Electromagnetic compatibility (EMC) generic immunity standard.
CFR-47: FCC Rules and Regulations:
CAUTI ON!
generic emission standard.
Part 1:
Part 1: Residential, commercial and light industry environment".
Part 15: “Radio frequency devices
Subpart B Unintentional radiators”
Servicing the machines can only be done by an authorized Kramer technician. Any user who makes changes or
modifications to the unit without the expressed approval of the manufacturer will void user authority to operate the
equipment.
Use the supplied DC power supply to feed power to the machine.
Please use recommended interconnection cables to connect the machine to other components.
Kramer
9
Page 12
For the latest information on our products and a list of Kramer
distributors, visit our Web site: www.kramerelectronics.com,
where updates to this user manual may be found.
We welcome your questions, comments and feedback.
Safety Warning:
Disconnect the unit from the power supply before
opening/servicing.
Caution
Kramer Electronics, Ltd.
Web site: www.kramerelectronics.com
E-mail: info@kramerel.com
P/N: 2900-000321 REV 2
Loading...