Kramer Electronics, Ltd.
USER MANUAL
Models:
TP-1xl,
TP-2xl,
708,
711xl,
712xl,
Video Line Transmitter
Video Line Receiver
Video Audio Line Receiver
Video-Audio Line Transmitter
Video-Audio Line Receiver
Contents
Contents
1
2
3
4
4.1 An Overview of the TP-1xl/TP-2xl 3
4.2 Your TP-1xl Video Line Transmitter 4
4.3 Your TP-2xl Video Line Receiver 5
4.4 Connecting the TP-1xl/TP-2xl Video Line Transmitter/Receiver 6
5
5.1 An Overview of the 708 Video Audio Line Receiver 8
5.2 Your 708 Video Audio Line Receiver 9
5.3 Connecting the 708 Video Audio Line Receiver 10
6
6.1 An Overview of the 711xl / 712xl 11
6.2 Your 711xl Video-Audio Line Transmitter 12
6.3 Your 712xl Video-Audio Line Receiver 13
6.4 The 6-pole Detachable Terminal Block Connector Pinout 14
6.5 Connecting the 711xl and the 712xl 14
7
Figures
Figure 1: TP-1xl Video Line Transmitter 4
Figure 2: TP-2xl Video Line Receiver 5
Figure 3: Connecting the TP-1xl/TP-2xl Video Line Transmitter / Receiver System 7
Figure 4: Connecting an Additional TP-2xl Unit 7
Figure 5: 708 Video Audio Line Receiver 9
Figure 6: Connecting the 708 Video Audio Line Receiver 10
Figure 7: 711xl Video-Audio Line Transmitter 12
Figure 8: 712xl Video-Audio Line Receiver 13
Figure 9: Connecting the Video-Audio Line Transmitter / Receiver System 15
Introduction 1
Getting Started 1
Overview 2
The TP-1xl and TP-2xl Video Line Transmitter and Receiver 3
The 708 Video Audio Line Receiver 8
The 711xl and 712xl Video-Audio Line Transmitter and Receiver 11
Technical Specifications 16
Tables
Table 1: TP-1xl Video Line Transmitter Features 4
Table 2: TP-2xl Video Line Receiver Features 5
Table 3: 708 Video Audio Line Receiver Features 9
Table 4: 711xl Video-Audio Line Transmitter Features 12
Table 5: 712xl Video-Audio Line Receiver Features 13
Table 6: 711xl/712xl LINE IN and LINE OUT Connector Pinout 14
Table 7: Technical Specifications of the TP-1xl and the TP-2xl 16
Table 8: Technical Specifications of the 708 16
Table 9: Technical Specifications of the 711xl and the 712xl 17
i
Introduction
1 Introduction
Welcome to Kramer Electronics (since 1981): a world of unique, creative and
affordable solutions to the infinite range of problems that confront the video, audio
and presentation professional on a daily basis. In recent years, we have redesigned
and upgraded most of our line, making the best even better! Our 500-plus
different models now appear in 8 Groups1, which are clearly defined by function.
Congratulations on purchasing your Kramer: TP-1xl, Video Line Transmitter
and/or TP-2xl, Video Line Receiver and/or 708, Video Audio Line Receiver and/or
711xl, Video-Audio Line Transmitter and/or 712xl, Video-Audio Line Receiver.
The TP-1xl and the TP-2xl are ideal for:
Simplifications of security and CCTV installations
Teleconferencing in offices and hospitals using existing intercom or
telephone wiring
Simple and quick studio wiring
The 708, the 711xl and the 712xl are ideal for:
Remote monitoring for CCTV, medical, school and broadcast applications
Existing facilities with TP cable already installed
Teleconferencing in offices and hospitals using existing intercom or
telephone wiring
The package includes one or more of the following Kramer products:
TP-1xl, TP-2xl, 708, 711xl, or 712xl
Power adapter (12V DC Input) and this user manual2
2 Getting Started
We recommend that you:
Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
Review the contents of this user manual
Use Kramer high performance high resolution cables3
1 GROUP 1: Distribution Amplifiers; GROUP 2: Video and Audio Switchers, Matrix Switchers and Controllers; GROUP 3:
Video, Audio, VGA/XGA Processors; GROUP 4: Interfaces and Sync Processors; GROUP 5: Twisted Pair Interfaces;
GROUP 6: Accessories and Rack Adapters; GROUP 7: Scan Converters and Scalers; and GROUP 8: Cables and Connectors
2 Download up-to-date Kramer user manuals from the Internet at this URL: http://www.kramerelectronics.com
3 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com
1
Overview
3 Overview
This manual describes the:
The TP-1xl Video Line Transmitter and the TP-2xl Video Line Receiver
(see section 4)
The 708 Video Audio Line Receiver (see section 5)
The 711xl Video-Audio Line transmitter and the 712xl Video-Audio Line
Receiver (see section 6)
To achieve the best performance:
Connect only good quality connection cables, thus avoiding interference,
deterioration in signal quality due to poor matching, and elevated noiselevels (often associated with low quality cables)
Avoid interference from neighboring electrical appliances and position
your Kramer products away from moisture, excessive sunlight and dust
2
KRAMER: SIMPLE CREATIVE TECHNOLOGY
The TP-1xl and TP-2xl Video Line Transmitter and Receiver
4 The TP-1xl and TP-2xl Video Line Transmitter and Receiver
This section:
Overviews the TP-1xl and TP-2xl (see section 4.1)
Defines your TP-1xl (see section 4.2)
Defines your TP-2xl (see section 4.3)
Describes how to connect the TP-1xl/TP-2xl Video Line
Transmitter/Receiver (see section 4.4)
4.1 An Overview of the TP-1xl/TP-2xl
The TP-1xl and TP-2xl are a twisted pair transmitter and receiver for
composite video signals. The TP-1xl transmitter converts a composite video
signal to a twisted pair signal and the TP-2xl receiver converts the twisted pair
signal back into a composite video signal.
The TP-1xl/TP-2xl also feature:
A bandwidth of 13MHz at 300 meters (960 feet)
Twisted pair inputs and outputs on a terminal block connector
Level (GAIN) and equalization (HF1) controls
A system range of up to 1000 meters (3200 feet)
A LOOP terminal block on the TP-2xl to increase the number of outputs
by connecting additional receivers
The TP-1xl and the TP-2xl are housed in a desktop-sized enclosure letting
you rack-mount two units side-by-side in a 1U rack space with the optional
RK-50RN adapter.
1 High Frequency
3
The TP-1xl and TP-2xl Video Line Transmitter and Receiver
4.2 Your TP-1xl Video Line Transmitter
Figure 1 and Table 1 define the TP-1xl:
Figure 1: TP-1xl Video Line Transmitter
Table 1: TP-1xl Video Line Transmitter Features
# Feature Function
1 POWER Switch Illuminated switch for turning the unit ON or OFF
2 CV IN BNC Connector Connect to the composite video source
3 GAIN Trimmer Turn to adjust the output signal level1
COMP
4
5 LINE OUT Terminal Block2
6 Power Connector with Fuse AC connector enabling power supply to the unit
HF Trimmer Turn to adjust the output signal equalization1
Connect to the LINE IN terminal block on the TP-2xl
1 Insert a screwdriver into the hole and carefully rotate it, to trim the level
2 The second and third blocks marked + and – (video + and video – respectively)
4
KRAMER: SIMPLE CREATIVE TECHNOLOGY
The TP-1xl and TP-2xl Video Line Transmitter and Receiver
4.3 Your TP-2xl Video Line Receiver
Figure 2 and Table 2 define the TP-2xl:
Figure 2: TP-2xl Video Line Receiver
Table 2: TP-2xl Video Line Receiver Features
# Feature Function
1 POWER Switch Illuminated switch for turning the unit ON or OFF
2 CV OUT BNC Connector Connect to the composite video acceptor
3 GAIN Trimmer Turn to adjust the output signal level1
COMP
4
5 IN Terminal Block
LINE
6
7 TERM button When pressed, terminates the unit that is the last in the
8 Power Connector with Fuse AC connector enabling power supply to the unit
HF Trimmer Turn to adjust the output signal equalization1
LOOP Terminal
Block3
2
Connect to the LINE OUT terminal block on the TP-1xl
Connect to the LINE IN terminal block of an additional
receiver
line (not looped)
1 Insert a screwdriver into the hole and carefully rotate it, to trim the level
2 The first and second blocks marked – and + (video – and video + respectively)
3 The third and fourth blocks marked – and + (video – and video + respectively)
5
The TP-1xl and TP-2xl Video Line Transmitter and Receiver
4.4 Connecting the TP-1xl/TP-2xl Video Line Transmitter/Receiver
You can use the TP-1xl and TP-2xl to configure a Video Line Transmitter and
Receiver system.
To connect the TP-1xl Video Line Transmitter with the TP-2xl Video Line
Receiver, as illustrated in the example in Figure 3, do the following:
1. Connect a composite video source (for example, a composite video player) to
the CV IN BNC connector of the TP-1xl.
2. On the TP-2xl, connect the CV OUT BNC connector to a composite video
acceptor (for example, a display).
3. Connect the LINE OUT connector1 of the TP-1xl to the LINE IN connector2
of the TP-2xl, via twisted pair cabling (maximum range of up to 3200ft
(1000m)).
4. If required, connect the LINE LOOP connector3 of the TP-2xl to the LINE IN
connector2 of an additional TP-2xl (as illustrated in Figure 4).
5. Connect the power cord on the TP-1xl and the TP-2xl (not illustrated in
Figure 3).
6. On the TP-1xl and/or the TP-2xl, if required, adjust the COMP GAIN and HF
levels, by inserting a screwdriver into each of the small holes and carefully
rotating them.
1 The second and third terminal marked + and – respectively
2 The first and second terminal marked – and + respectively
3 The third and fourth terminal marked – and + respectively
6
KRAMER: SIMPLE CREATIVE TECHNOLOGY
The TP-1xl and TP-2xl Video Line Transmitter and Receiver
TP-1xl
TP-2xl
To the LINE IN connector
From the LINE OUT
Composite
Video Player
Display/Recorder
Figure 3: Connecting the TP-1xl/TP-2xl Video Line Transmitter / Receiver System
connector
of the unit
TP-1xl
of an additional
TP-2xl
Figure 4: Connecting an Additional TP-2xl Unit
unit
7
The 708 Video Audio Line Receiver
5 The 708 Video Audio Line Receiver
This section:
Overviews the 708 (see section 5.1)
Defines your 708 (section 5.2)
Describes how to connect the 708 Video Audio Line Receiver (see
section 5.3)
5.1 An Overview of the 708 Video Audio Line Receiver
The 708 receives video and unbalanced mono audio signals converted to a
twisted pair signal and converts the signal back to composite video and
twisted pair signals.
In addition, the 708 features:
A bandwidth of 58MHz at 400 meters
RJ-11 twisted pair connections
Level (VIDEO GAIN) and equalization (EQ) controls
A looping input
A selectable input signal termination button
A polarity inverter switch that inverts the incoming polarity
The 708 is part of the Kramer TOOLS™ family of compact high-quality and
cost effective solutions, and is fed from an external 12V DC source, making it
suitable for field operation.
8
KRAMER: SIMPLE CREATIVE TECHNOLOGY
The 708 Video Audio Line Receiver
5.2 Your 708 Video Audio Line Receiver
Figure 5 and Table 3 define the 708:
Figure 5: 708 Video Audio Line Receiver
Table 3: 708 Video Audio Line Receiver Features
# Feature Function
1 VIDEO OUT BNC Connector Connect to the composite video acceptor
2 EQ Trimmer Turn to adjust the output signal level1
3 VIDEO GAIN Trimmer Turn to adjust the output signal equalization1
4 AUDIO OUT RCA Connector Connect to the audio acceptor
5 TERM Push Button When pressed, terminates the unit that is the last in
the line (not looped)
6 INV Push Button When pressed, Inverts the incoming video signal
7 LOOP RJ-11 Connector Connect to the LINE IN terminal block of an additional
receiver to increase the number of outputs
8 LINE IN RJ-11 Connector Connect to the line out connector of the transmitter
9 ON LED Lights when receiving power
10 12V DC +12V DC connector for powering the unit
1 Insert a screwdriver into the hole and carefully rotate it, to trim the level
9
The 708 Video Audio Line Receiver
Display
Amplifier
5.3 Connecting the 708 Video Audio Line Receiver
To connect the 708 as illustrated in the example in Figure 6, do the following:
1. Connect the VIDEO OUT BNC connector to a composite video acceptor
(for example, a display).
2. Connect the AUDIO OUT RCA connector to an unbalanced mono audio
acceptor (for example, an amplifier with speakers).
3. Connect a transmitter to the LINE IN RJ-11 connector.
4. If required, connect the LOOP RJ-11 connector to the LINE IN RJ-11
connector2 of an additional 708 unit.
5. Connect a 12V DC power adapter to the power socket and connect the
adapter to the mains electricity.
6. If required, adjust the EQ (equalization) and VIDEO GAIN levels, by
inserting a screwdriver into each of the small holes and carefully rotating
them.
10
From
the Transmitter
Figure 6: Connecting the 708 Video Audio Line Receiver
KRAMER: SIMPLE CREATIVE TECHNOLOGY
The 711xl and 712xl Video-Audio Line Transmitter and Receiver
6 The 711xl and 712xl Video-Audio Line Transmitter and
Receiver
This section:
Overviews the 711xl and 712xl (see section 6.1)
Defines your 711xl (see section 6.2)
Defines your 712xl (see section 6.3)
Defines the 6-pole detachable terminal block connector pinout (see
section 6.4)
Describes how to connect the 711xl/712xl Video-Audio Line
Transmitter/Receiver (see section 6.5)
6.1 An Overview of the 711xl / 712xl
The 711xl and 712xl are a twisted pair transmitter and receiver for composite
video and unbalanced stereo audio signals. The 711xl transmitter converts
composite video and stereo audio to a twisted pair signal and the 712xl
receiver converts the twisted pair signal back into composite video and stereo
audio signals.
The 711xl/712xl feature:
A bandwidth of 45MHz
Twisted pair inputs and outputs on terminal block connectors
A system range of up to 300 meters (1000 feet)
Level (GAIN) and equalization (EQ) controls (for the 712xl)
In addition, the 712xl LINE IN can be looped to add additional outputs and
includes a selectable input signal termination push button.
The 711xl/712xl are part of the Kramer TOOLS™ family of compact highquality and cost effective solutions, and are fed from an external 12V DC
source, making them suitable for field operation.
11
The 711xl and 712xl Video-Audio Line Transmitter and Receiver
6.2 Your 711xl Video-Audio Line Transmitter
Figure 7 and Table 4 define the 711xl:
Figure 7: 711xl Video-Audio Line Transmitter
Table 4: 711xl Video-Audio Line Transmitter Features
# Feature Function
1 RIGHT RCA
AUDIO
IN
2
3 LINE OUT 6-pole Detachable
Terminal Block Connector
4 VIDEO IN BNC Connector Connect to composite video source
5 ON LED Lights when receiving power
6 12V DC +12V DC connector for powering the unit
Connector
LEFT RCA
Connector
Connect to the right unbalanced stereo audio source
Connect to the left unbalanced stereo audio source
Connect to the LINE IN 6-pole detachable block
connector of the 712xl (see section 6.4 for pinout)
12
KRAMER: SIMPLE CREATIVE TECHNOLOGY
The 711xl and 712xl Video-Audio Line Transmitter and Receiver
6.3 Your 712xl Video-Audio Line Receiver
Figure 8 and Table 5 define the 712xl:
Figure 8: 712xl Video-Audio Line Receiver
Table 5: 712xl Video-Audio Line Receiver Features
# Feature Function
1 R RCA Connector Connect to the right unbalanced stereo audio acceptor
AUDIO
OUT
2
3 TERM Push Button When pressed, terminates the unit that is the last in the
4 LINE IN 6-pole Detachable
5 EQ. Trimmer Turn to adjust the output signal equalization1
6
7 VIDEO OUT BNC Connector Connect to the composite video acceptor
8 ON LED Lights when receiving power
9 12V DC +12V DC connector for powering the unit
L RCA Connector Connect to the left unbalanced stereo audio acceptor
line (not looped)
Connect to the LINE OUT 6-pole detachable block
Terminal Block Connector
VIDEO
GAIN Trimmer Turn to adjust the output signal level1
connector of the 711xl (see section 6.4 for pin-out)
1 Insert a screwdriver into the hole and carefully rotate it, to trim the level
13
The 711xl and 712xl Video-Audio Line Transmitter and Receiver
6.4 The 6-pole Detachable Terminal Block Connector Pinout
Table 6 defines the LINE IN and LINE OUT connector pinout:
Table 6: 711xl/712xl LINE IN and LINE OUT Connector Pinout
PIN Function
1 Audio R+
2 Audio R3 Audio L+
4 Audio L-
5 Video +
6 Video -
6.5 Connecting the 711xl and the 712xl
You can use the 711xl and 712xl to configure a Video-Audio Transmitter and
Receiver system.
To connect the 711xl Video-Audio Line Transmitter with the 712xl Video-
Audio Line Receiver, as illustrated in the example in Figure 9, do the
following:
1. Connect a composite video source (for example, a composite video player) to
the VIDEO IN BNC connector on the 711xl.
2. Connect an unbalanced stereo source to the AUDIO IN RIGHT and LEFT
RCA connectors (for example, a composite video player).
3. On the 712xl, connect the VIDEO OUT BNC connector to a composite video
acceptor (for example, a display).
4. Connect an unbalanced stereo acceptor to the AUDIO OUT R and L RCA
connectors (for example, speakers).
5. Connect the LINE OUT 6-pole detachable terminal block connector1 of the
711xl to the LINE IN 6-pole detachable terminal connector 1 of the 712xl, via
twisted pair cabling (maximum range of up to 1000ft (300m))2.
6. On each 711xl / 712xl unit, connect a 12V DC power adapter to the power
socket and connect the adapter to the mains electricity.
7. On the 712xl, if required, adjust the VIDEO GAIN and EQ. levels, by
inserting a screwdriver into each of the small holes and carefully rotating
them.
1 See Table 6 for pinout. If you want to add an additional 712xl unit, connect the LINE IN 6-pole detachable terminal block
connector to the LINE IN connector of that additional 712xl by attaching another set of wires
2 A straight connection should be made between the units ( PIN 1 to PIN 1, PIN 2 to PIN 2, and so on)
14
KRAMER: SIMPLE CREATIVE TECHNOLOGY
The 711xl and 712xl Video-Audio Line Transmitter and Receiver
Composite
Video Source
Display
Figure 9: Connecting the Video-Audio Line Transmitter / Receiver System
15
Technical Specifications
7 Technical Specifications1
Table 7 includes the technical specifications of the TP-1xl and the TP-2xl,
Table 8 includes the technical specifications of the 708, and Table 9 includes
the technical specifications of the 711xl, and the 712xl:
Table 7: Technical Specifications of the TP-1xl and the TP-2xl
INPUT: 1 composite video, 1Vpp/75 on a
OUTPUT:
VIDEO BANDWIDTH (-3dB): 13MHz at 300 meters
DIFF. GAIN: 2% (@ 20 meters)
CONTROL: 0.9Deg (@ 20 meters)
VIDEO S/N RATIO: 73dB (@ 20 meters)
SYSTEM DELAY: <1 microsecond TYP. at 100 meters
CONTROLS: Gain: -3dB to +4.4dB; EQ.: -16dB to +9.9dB @ 4.4MHz
POWER SOURCE: 230 VAC, 50/60Hz, (115VAC, U.S.A.) 4VA each
DIMENSIONS: 16.5cm x 12cm x 4.5cm (6.5” x 4.7” x 1.8”, W , D, H.)
WEIGHT: 0.7kg. (1.6lbs.) approx. (each)
ACCESSORIES: Power cord (each)
OPTIONS: RK-50RN, 19” rack adapter holds two units in one vertical rack space
INPUTS: Looping balanced 150 on a 6/4 standard telephone socket, with termination
OUTPUTS: 1 composite video, 1Vpp/75 composite video, 1Vpp/75 unbalanced on a BNC
BANDWIDTH: Video: 58MHz; audio: 30kHz (at 30 meters without lightening arrestors)
NON-LINEARITY: <0.2% at short distances
DIFF. GAIN: 0.41%
DIFF. PHASE: 0.3 Deg.
K-FACTOR: 0.1% (@ 20m)
S/N RATIO: 72dB
CONTROLS: Video gain: -1.8dB to +2.3dB, EQ above 2.5 MHz: 0dB to 16dB, audio: 0dB to
POWER SOURCE: 12 VDC 40mA
DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”, W , D, H.)
WEIGHT: 0.28kg. (0.62lbs.) Approx.
ACCESSORIES: Power supply, mounting bracket
OPTIONS: Model VA-50P power supply with six 12VDC outlets; RK-T1, RK-T3, 19” rack
TP-1xl TP-2xl
BNC type connector
4-pin detachable terminal block
4-pin detachable terminal block
1 composite video, 1Vpp/75 on a
BNC type connector
Table 8: Technical Specifications of the 708
switch and polarity inversion switch
connector
1 audio - line level, up to 4.6Vpp/100 on an RCA connector
52dB; loop termination, signal invert
adapters
1 Specifications are subject to change without notice
16
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Technical Specifications
Table 9: Technical Specifications of the 711xl and the 712xl
INPUT: Video, 1Vpp/75 on a BNC connector;
OUTPUT: 6-pole detachable terminal block
MAX. SIGNAL LEVEL: 2.1Vpp (video), 4.2Vpp (audio)
VIDEO BANDWIDTH (-3dB): 45MHz
AUDIO BANDWIDTH (-3dB): 100kHz
DIFF. GAIN: 1.4%
DIFF. PHASE: 0.6 Deg.
VIDEO S/N RATIO: 76dB
AUDIO S/N RATIO: 77dB unweighted
AUDIO THD + NOISE: 0.033%, 1kHz
AUDIO 2nd HARMONIC: 0.002%
MAX. SIGNAL LEVEL: 1.7Vpp (video), 4.2Vpp (audio)
POWER SOURCE: 12 VDC 80mA
DIMENSIONS: 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”, W, D, H.)
WEIGHT: 0.28kg. (0.62lbs.) approx. (each)
ACCESSORIES: Power supply, mounting bracket (each)
OPTIONS: RK-T1, RK-T3, 19 inch rack adapters
711xl 712xl
audio 1Vpp / 33k on RCA connectors
connector
6-pole detachable terminal block
connector
Video, 1Vpp/75 on a BNC connector;
audio 1Vpp / 150 on RCA connectors
17
LIMITED WARRANTY
Kramer Electronics (hereafter Kramer) warrants this product free from defects in material and workmanship under the
following terms.
HOW LONG IS THE WARRANTY
Labor and parts are warranted for seven years from the date of the first customer purchase.
WHO IS PROTECTED?
Only the first purchase customer may enforce this warranty.
WHAT IS COVERED AND WHAT IS NOT COVERED
Except as below, this warranty covers all defects in material or workmanship in this product. The following are not covered
by the warranty:
1. Any product which is not distributed by Kramer, or which is not purchased from an authorized Kramer dealer. If you are
uncertain as to whether a dealer is authorized, please contact Kramer at one of the agents listed in the web site
www.kramerelectronics.com.
2. Any product, on which the serial number has been defaced, modified or removed.
3. Damage, deterioration or malfunction resulting from:
i) Accident, misuse, abuse, neglect, fire, water, lightning or other acts of nature
ii) Product modification, or failure to follow instructions supplied with the product
iii) Repair or attempted repair by anyone not authorized by Kramer
iv) Any shipment of the product (claims must be presented to the carrier)
v) Removal or installation of the product
vi) Any other cause, which does not relate to a product defect
vii) Cartons, equipment enclosures, cables or accessories used in conjunction with the product
WHAT WE WILL PAY FOR AND WHAT WE WILL NOT PAY FOR
We will pay labor and material expenses for covered items. We will not pay for the following:
1. Removal or installations charges.
2. Costs of initial technical adjustments (set-up), including adjustment of user controls or programming. These costs are the
responsibility of the Kramer dealer from whom the product was purchased.
3. Shipping charges.
HOW YOU CAN GET WARRANTY SERVICE
1. To obtain service on you product, you must take or ship it prepaid to any authorized Kramer service center.
2. Whenever warranty service is required, the original dated invoice (or a copy) must be presented as proof of warranty coverage,
and should be included in any shipment of the product. Please also include in any mailing a contact name, company, address, and
a description of the problem(s).
3. For the name of the nearest Kramer authorized service center, consult your authorized dealer.
LIMITATION OF IMPLIED WARRANTIES
All implied warranties, including warranties of merchantability and fitness for a particular purpose, are limited in duration to
the length of this warranty.
EXCLUSION OF DAMAGES
The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer
shall not be liable for:
1. Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss
of time, commercial loss; or:
2. Any other damages, whether incidental, consequential or otherwise. Some countries may not allow limitations on how long an
implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitations and exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights, which vary from place to place.
NOTE: All products returned to Kramer for service must have prior approval. This may be obtained from your dealer.
This equipment has been tested to determine compliance with the requirements of:
EN-50081: "Electromagnetic compatibility (EMC);
EN-50082: "Electromagnetic compatibility (EMC) generic immunity standard.
CFR-47: FCC Rules and Regulations:
CAUTION!
Servicing the machines can only be done by an authorized Kramer technician. Any user who makes changes or modifications to
the unit without the expressed approval of the manufacturer will void user authority to operate the equipment.
Use the supplied DC power supply to feed power to the machine.
Please use recommended interconnection cables to connect the machine to other components.
generic emission standard.
Part 1: Residential, commercial and light industry"
Part 1: Residential, commercial and light industry environment".
Part 15: “Radio frequency devices
Subpart B – Unintentional radiators”
18
KRAMER: SIMPLE CREATIVE TECHNOLOGY
For the latest information on our products and a list of Kramer
distributors, visit our Web site: www.kramerelectronics.com,
where updates to this user manual may be found.
We welcome your questions, comments and feedback.
Safety Warning:
Disconnect the unit from the power supply before
opening/servicing.
Caution
Kramer Electronics, Ltd.
Web site: www.kramerelectronics.com
E-mail: info@kramerel.com
P/N: 2900-000164 REV 1
Loading...