Kramer Electronics tp-145 User Manual

Kramer Electronics, Ltd.

USER MANUAL

Models:

TP-145, XGA / Audio / Data Line T ra nsmitter
TP-146, UXGA / Audio / Data L ine Receiver

Contents

i

Contents

1 Introduction 1
2 Getting Started 1

2.1 Quick Start 2

3 Overview 2

3.1 Shielded Twisted Pair/Unshielded Twisted Pair 3

3.2 Defining the EDID 3

3.3 Recommendations for Achieving the Best Performance 4

4 Defining the TP-145/TP-146 4

4.1 Defining the TP-145 XGA/Audio/Data Line Transmitter 4

4.2 Defining the TP-146 UXGA/Audio/Data Line Receiver 5

4.2.1 Internal Polarity and Sync Mode Switches 7

5 Connecting the TP-145 and the TP-146 7

5.1 Transmitting via RS-232 9

5.2 Wiring the Twisted Pair RJ-45 Connectors 9

6 Acquiring the EDID 10
7 Technical Specifications 11

Figures

Figure 1: TP-145 XGA/Audio/Data Line Trans mitter Front and Rear Panels 5
Figure 2: TP-146 UXGA/Audio/Data Line Receiver F r ont and Rear Panels 6
Figure 3: TP-146 Internal Polarity Switches 7
Figure 4: Connecting the UXGA/Audio/Data Line Transmitter/Receiver System 8
Figure 5: RS-232 Pinout Co nne c tion 9
Figure 6: TP Connector 10

Tables

Table 1: TP-145 XGA/Audio/Data Line Transmitter Front and Rear Panel Featur es 5
Table 2: TP-146 UXGA/Audio/Data Line Receiver Front and Rear Panel Features 6
Table 3: TP-146 Internal Polarity Switches and Descriptions 7
Table 4: RS-232 Pinout Connection 9
Table 5: TP Connector Pinout 10
Table 6: Technical Specifications of the TP-145 and TP-146 11