Kramer Electronics, Ltd.
Preliminary
USER MANUAL
Model:
TP-112HD
XGA/HD Line Transmitter - DA
Contents
Contents
1 Introduction 1
2 Getting Started 1
2.1 Quick Start 2
3 Overview 3
3.1 About the Power Connect™ Feature 3
3.2 Shielded Twisted Pair (STP)/Unshielded Twisted Pair (UTP) 3
3.3 About the TP-112HD 4
3.4 Recommendations for Achieving the Best Performance 4
4 Your TP-112HD XGA/HD Line Transmitter – DA 4
5 Configuring a 1:2 XGA/HD-to-Twisted Pair DA System 6
5.1 Wiring the CAT 5 LINE IN/LINE OUT RJ-45 Connectors 9
6 Technical Specifications 9
Figures
Figure 1: TP-112HD XGA/HD Line Transmitter – DA 5
Figure 2: TP-112HD (Top Side Panel) 5
Figure 3: TP-112HD (Lower Side Panel) 5
Figure 4: TP-112HD (Underside Panel) 6
Figure 5: Configuring a 1:2 XGA/HD to Twisted Pair Transmitter/Receiver/DA 8
Figure 6: CAT 5 PINOUT 9
Tables
Table 1: TP-112HD XGA/HD Line Transmitter - DA Features 5
Table 2: TP-112HD (Underside Panel) Features 6
Table 3: CAT 5 PINOUT 9
Table 4: Technical Specifications of the TP-112HD (with 100m CAT 5 cable) 9
i
Introduction
1 Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creative, and affordable solution s to the vast
range of problems that confront the video, audio, presentation, and
broadcasting professional on a daily basis. In recent years, we have
redesigned and upgraded most of our line, making the best even better! Our
1,000-plus different models now appear in 11 groups
1
that are clearly
defined by function.
Thank you for purchasing the Kramer TOOLS: TP-112HD XGA/HD Line
Transmitter - DA, which is ideal for:
• Presentation and multimedia applications
• Long range graphics distribution for schools, hospitals and stores
The package includes the following:
• TP-112HD XGA/HD Line Transmitter - DA
• Power supply (12V DC)
• This user manual
2
2 Getting Started
We recommend that you:
• Unpack the equipment carefully and save the original box and
packaging materials for possible future shipment
• Review the contents of this user manual
• Use Kramer high performance high-resolution cables
3
1 GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Matrix Switchers; GROUP 3: Control Systems;
GROUP 4: Format/Standards Converters; GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialt y AV Products;
GROUP 7: Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity;
GROUP 10: Accessories and Rack Adapters; GROUP 11: Sierra Products
2 Download up-to-date Kramer user manuals from our Web site at http://www.kramerelectronics.com
3 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com
1
Getting Started
2.1 Quick Start
This quick start chart summarizes the basic setup and operation steps.
2
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Overview
3 Overview
This section describes:
• The power connect feature, see section 3.1
• Using shielded twisted pair (STP)/unshielded twisted pair (UTP), see
section 3.2
• A summary of the TP-112HD, see section 3.3
• Recommendations for achieving the best performance, see section 3.4
3.1 About the Power Connect™ Feature
The
Power Connect feature applies as long as the cable can carry power.
This feature is available when using STP cable and the distance does not
exceed 50m on standard CAT 5 cable. For longer distances, heavy gauge
cable should be used
1
. For units which are connected via RJ-45 connectors,
make sure that the shield of the STP cable is connected to the metal casing
of the connectors on both ends of the cable. For units which are connected
via terminal block connectors, the shield of the STP cable must be
connected to a ground terminal on the units at both ends (use the ground
terminal of the power supply connection if necessary).
For a CAT 5 cable exceeding a distance of 50m, separate power suppli es
should be connected to the transmitter and to the receiver simultaneously.
3.2 Shielded Twisted Pair (STP)/Unshielded Twisted Pair (UTP)
recommend that you use Shielded Twisted Pair (STP) cable. There are
We
different levels of STP cable available, and we advise you to use the best
quality STP cable that you can afford. Our non-skew-free cable, Kramer
BC-STP is intended for analog signals where skewing is not an issue. For
cases where there is skewing, our UTP skew-free cable, Kramer BC-XTP,
may be used. Bear in mind, though, that we advise using STP cables where
possible, since the compliance to electromagnetic interference was tested
using those cables.
Although Unshielded Twisted Pair (UTP) cable might be preferred for long
range applications, the UTP cable should be installed far away from electric
cables, motors and so on, which are prone to cre ate electrical interference.
However, since the use of UTP cable might cause inconform ity to
electromagnetic standards, Kramer does not commit to meeting the standard
with UTP cable.
1 CAT 5 cable is still suitable for the video/audio transmission, but not for feeding the power at these distances
3
Your TP-112HD XGA/HD Line Transmitter – DA
3.3 About the TP-112HD
Your Kramer TOOLS TP-112HD XGA/HD Line Transmitter - DA:
• Receives a computer graphics
CAT 5 cables to appropriate receivers
1
/HD2 signal and transmits it over two
3
• Has a transmission range of more than 300 ft. (more than 100 meters)
• Includes the Power Connect feature
• Is 12V DC fed
3.4 Recommendations for Achieving the Best Performance
To ac
hieve the best performance:
• Use only good quality connection cables
4
to avoid interference,
deterioration in signal quality due to poor matching, and elevated noise
levels (often associated with low quality cables).
• Avoid interference from neighboring electrical appliances that may
adversely influence signal quality and position your Kramer product
away from moisture, excessive sunlight and dust
4 Your TP-112HD XGA/HD Line Transmitter – DA
Figure 1, Figure 2, Figure 3 and Table 1 define the TP-112HD:
1 The terminology XGA is used throughout this manual, where this implies an y RGBHV signal on a 15-pin HD connector
having a resolution from VGA up to UXGA
2 The TP-112HD accepts high definition resolutions: 480p, 576p, 720p, 1080i, and 1080p
3 Note that the CAT 5 connectors exclude audio
4 Available from Kramer Electronics on our Web site at http://www.kramerelectronics.com
4
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your TP-112HD XGA/HD Line Transmitter – DA
Figure 1: TP-112HD XGA/HD Line Transmitter – DA
Figure 2: TP-112HD (Top Side Panel)
Figure 3: TP-112HD (Lower Side Panel)
Table 1: TP-112HD XGA/HD Line Transmitter - DA Features
# Feature Function
1
12V DC
2 LINE OUT 2 RJ-45 Connector Connects to1 the LINE IN RJ-45 connector on the (second)
3 LINE OUT 1 RJ-45 Connector Connects to1 the LINE IN RJ-45 connector on the (first) TP-120
4 XGA/HD I NP UT 15-pin HD
Connector
5 ON LED Illuminates when receiving power
+12V DC connector for powering the unit
TP-120 XGA Line Receiver
XGA Line Receiver
Connect to the XGA source
2
2
Figure 4 and Table 2 define the TP-112HD underside panel:
1 Using a UTP CAT 5 cable with RJ-45 connectors at both ends (the PINOUT is defined in Table 3 and Figure 6)
2 Refer to the separate user manual: PT-110, PT-120, TP-120, WP-110, which can be downloaded from the Internet at:
http://www.kramerelectronics.com
. Also, see the example illustrated in Figure 5
5
Configuring a 1:2 XGA/HD-to-Twisted Pair DA System
Figure 4: TP-112HD (Underside Panel)
Table 2: TP-112HD (Underside Panel) Features
# Feature Function
1 VS Switch Slide the switch to the left1 to change the VS polarity to NEGATIVE polarity2; slide
2 HS Switch Slide the switch to the left1 to change the HS polarity to NEGATIVE polarity2; slide
the switch to the right (to NORMAL) to retain the polarity
the switch to the right (to NORMAL) to retain the polarity
5 Configuring a 1:2 XGA/HD-to-Twisted Pair DA System
You can use the TP-112HD XGA/HD Line Transmitter – DA with two
TP-120 XGA Line Receiver units
3
to configure a 1:2 XGA/HD-to-Twisted
Pair DA system. This will let you transmit a computer graphics/HD signal to
two displays via long line CAT 5 UTP cabling.
To connect the TP-112HD to two TP-120 units, as the example in Figure 5
illustrates, do the following:
1. On the TP-112HD, connect the XGA/HD source (for example, a
computer graphics/HD source) to the XGA/HD INP UT 1 5- pi n H D
connector, and connect the line output RJ-45 connector
4
:
OUT 1 connector to the LINE IN RJ-45 connector on the first
TP-120
OUT 2 connector to the LINE IN RJ-45 connector on the second
TP-120
1 By default, both switches are set to the right
2 Downgoing syncs
3 Refer to the separate user manual: PT-110, PT-120, TP-120, WP-110, which can be downloaded from the Internet at:
http://www.kramerelectronics.com
4 Via UTP cabling (with a range of more than 300ft (>100m)). For details of how to wire a CAT 5 LINE IN/LINE OUT
RJ-45 connector, see section 5.1
6
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Configuring a 1:2 XGA/HD-to-Twisted Pair DA System
2. On the two TP-120 units, connect the:
XGA OUT 15-pin HD connector of the first TP-120 unit to the
XGA/HD acceptor (for example, display 1)
XGA OUT 15-pin HD connector of the second TP-120 unit to the
XGA/HD acceptor (for example, display 2)
3. On each of the three Kramer TOOLS, connect the 12V DC power adapter
to the power socket and connect the adapter to the mains electricity.
The signal from the XGA source is transmitted via the two CAT 5 cables,
decoded and converted at the each of the XGA OUT 15-pin HD connectors
to the XGA acceptors.
4. On the TP-120 units, if necessary:
1
Set the H SYNC and V SYNC switches
Adjust
2
the video output signal level and/or cable compensation
on the underside
equalization level
3
5. On the TP-112HD, if necessary, set the VS and HS switches
on the
underside
1 By default, both switches are set down (for negative V SYNC and H SYNC polarity)
2 Use a screwdriver to carefully rotate the trimmer, adjusting the appropriate level
3 By default, both switches are set to the right (to NORMAL) to retain the V SYNC and H SYNC polarity
7
Configuring a 1:2 XGA/HD-to-Twisted Pair DA System
Figure 5: Configuring a 1:2 XGA/HD to Twisted Pair Transmitter/Receiver/DA
8
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Technical Specifications
5.1 Wiring the CAT 5 LINE IN/LINE OUT RJ-45 Connectors
Table 3
and Figure 6 define the UTP CAT 5 PINOUT, using a straight pin
to pin cable with RJ-45 connectors:
Table 3: CAT 5 PINOUT
EIA /TIA 568A EIA /TIA 56 8B
PIN Wire Color PIN Wire Color
1 Green / White 1 Orange / White
2 Green 2 Orange
3 Orange / White 3 Green / White
4 Blue 4 Blue
5 Blue / White 5 Blue / White
6 Orange 6 Green
7 Brown / White 7 Brown / White
8 Brown 8 Brown
Pair 1 4 and 5 Pair 1 4 and 5
Pair 2 3 and 6 Pair 2 1 and 2
Pair 3 1 and 2 Pair 3 3 and 6
Pair 4 7 and 8 Pair 4 7 and 8
Figure 6: CAT 5 PINOUT
6 Technical Specifications
The TP-112HD technical specifications1 are shown in Table 4.
Table 4: Technical Specifications of the TP-112HD (with 100m CAT 5 cable)
INPUT: 1 XGA/HD on a 15-pin HD connector
OUTPUTS: 2 RJ-45 connectors
MAX. O U T P U T LEVEL: 1.7Vpp
HIGHEST RESOLUTION2: WUXGA, 1080p
DIFF. GAIN2: 4%
DIFF. PHASE2: 0.3Deg
K-FACTOR2: 0.1%
S/N RATIO2: 65dB
CONTROLS2: 2 switches for syn c inv ersion
COUPLING2: AC
POWER SOURCE: 12 VDC 522mA3
DIMENSIONS: 12cm x 7.15cm x 2.76cm (4.7" x 2.8" x 1.08") W, D, H
WEIGHT: 0.3kg (0.67lbs) approx.
ACCESSORIES: Power supply
OPTIONS: RK-3T 19" rack adapter
1 Specifications are subject to change without notice
2 For the TP-112HD Transmitter/ TP-120 Receiver SETUP
3 Sufficient for feeding two receivers via CAT 5
9
LIMITED WARRANTY
Kramer El ec t ro ni cs (hereafter ) warrants this pr oduct free from defects in m ate rial and wor km anship under the
following terms.
HOW LONG IS THE WARRANTY
Labor and parts are warranted for seven years from the date of the first customer purchase.
WHO IS PROTECTED?
Only the first purchase customer may enforce this warranty.
WHAT IS COVERED AND WHA T IS NOT COVERED
Except as below, this warr anty covers all defects in ma terial or workmanship in th is product. The following are not covered
by the warranty:
1. Any product which is not distributed by Kramer, or whi ch is not purchased from an authorized Kramer dealer. If you are
uncertain as to whether a dealer is authorized, please contact Kramer at one of the agents listed in the Web site
www.kramerelectronics.com.
2. Any product, on which the serial number has been defaced, modified or removed, or on which the WARRANTY VOID
IF reattached, removed or otherwise interfered with.
TAMPERED sticker has been torn,
3. Damage, det erioratio n or ma lfunction resulti ng from:
i) Accident, m isuse, abu se, negl ect, fire, wat er, l ightning o r other acts of nature
ii) Produc t modi ficati on, or failu re to f ollow instru ctio ns sup plied with t he pro duct
iii) Repair or a ttemp ted re pair b y anyo ne not auth orize d by Kra mer
iv) Any ship ment o f the product (clai ms mus t be pr esente d to the carr ier)
v) Removal or insta llation of the pro duct
vi) Any other cau se, which does not relate t o a produc t defect
vii) Cartons, equipment enclosures, cables or accessories used in conjunction with the product
WHAT WE WILL PA Y FOR AND WHAT WE WILL NOT PA Y FOR
We will pay labor and material expenses for covered i tems. W e will not pay for the following:
1. Removal or installations charges.
2. Costs of initial technical adjustments (set-up), including adjustment of user controls or programming. These costs are the
responsi bility o f the Kram er deal er from wh om the pr oduct w as purcha sed.
3. Shipping charges.
HOW YOU CAN GET WARRANTY SERVICE
1. To obtain service on you product, you must take or ship it prepaid to any authorized Kramer service center.
2. Whenever warranty service is required, the original dated invoice (or a copy) must be presented as proof of warranty
coverage, and should be included in any shipment of the product. Please also include in any mailing a contact name,
company, address, and a description of the problem(s).
3. For the name of the nearest Kramer authorized service center, consult your authorized dealer.
LIMITATION OF IMPLIED WARRANTIES
All implied warranties, including warranties of merchantability and fitness for a particular purpose, are limited in duration to
the length of this warranty.
EXCLUSION OF DAMAGES
The liability of Kramer for any effective products is limited to the repair or replacem ent of the product at our option. Kramer shall
not be liabl e for:
1. Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss
of time, c omme rcial lo ss; or :
2. Any other dama ges, whet her i nci denta l, co nseq uenti al o r o therw ise. Som e co untri es ma y n ot a llow lim itati ons o n ho w lon g an
implied warranty lasts and/or do not allow the ex clusion or limitation of incidental or consequential damages, so the above
limitati ons and e xclusio ns may no t apply to you.
This warra nty give s you spec ific le gal rights , and you m ay also have othe r rights, w hich vary from p lace to pl ace.
All products returned t o Kramer for service must have prior approval. This may be obtained from your dealer.
NOTE:
This equipment has been tested to determine compliance with the requ irements of:
EN-50081: "Electromagnetic compatibility (EMC);
Residential, commercial and light industry"
EN-50082: "Electromagnetic compatibility (EMC) gener ic immunity standard.
CFR-47: FCC* Rul es and Regulations:
CAUTION!
generic emission standard.
Part 1:
Part 1: Residential, commercial and light industry environment".
Part 15: “Radio frequency devices
Subpart B Unintentional radiators”
Servicing the machines can only be done by an authorized Kramer technician. Any user who makes changes or
modifications to the unit without the expressed approval of the manufacturer will vo id user authority to operate the
equipment.
Use the supplied DC power supply to feed power to the machine.
Please use recommended interconnection cables to connect the machine to o ther components.
* FCC and CE approved u sing STP cable (for twisted pai r products )
Kramer
10
KRAMER: SIMPLE CREATIVE TECHNOLOGY
For the latest information on our products and a list of Kramer
distributors, visit our Web site: www.kramerelectronics.com,
where updat
es to this user manual may be found.
We welcome your questions, comments and feedback.
Safety Warning:
Disconnect the unit from the power supply before
opening/servicing.
Caution
Kramer Electronics, Ltd.
Web site: www.kramerelectronics.com
E-mail: info@kramerel.com
P/N: 2900-000135 REV 3
Loading...