Kramer Electronics SI-VGAT UXGA User Manual
The Kramer SI-VGAT UXGA Step-In Commander
Congratulations on purchasing your Kramer TOOLS® SI-VGAT UXGA Step-In
Commander which is ideal for boardrooms and presentation rooms.
The Kramer SI-VGAT is a UXGA (up to WUXGA) and unbalanced stereo audio
remote control panel that is used to remotely take control of a compatible switcher, for
example, the VP-81KSi.
Figure 1 and Table 1 define the SI-VGAT UXGA Step-In Commander.
Figure 2 illustrates connecting the SI-VGAT to a source and the VP-81KSi switcher.
Figure 2: SI-VGAT Wiring Connections
To connect the SI-VGAT as illustrated in
Figure 2:
1. Connect the UXGA video source (for example, a computer graphics source) to the
UXGA INPUT connector on the front panel of the SI-VGAT.
Figure 1: SI-VGAT UXGA Step-In Commander Front and Rear Panel
Table 1: SI-VGAT UXGA Step-In Commander Front and Rear Features
# Feature Function
1 UXGA INPUT 15-pin HD (F) Connector Connect to the UXGA video source (up to WUXGA)
2 AUDIO INPUT 3.5mm Mini Jack Connect to the unbalanced stereo audio source
3 STEP IN Button Press to switch the input to this remote control panel. The button
4 AUDIO OUTPUT 3.5mm Mini Jack Connect to the 3.5mm mini jack audio input connector of a
5 UXGA OUTPUT 15-pin HD (F)
Connector
lights when active
compatible switcher (for example, the VP-81KSi)
Connect to the UXGA video input connector of a compatible
switcher (for example, the VP-81KSi)
2. Connect the unbalanced stereo audio source (for example, a computer graphics
source) to the 3.5mm mini jack AUDIO INPUT connector on the front of the
SI-VGAT.
3. Connect the AUDIO OUTPUT 15-pin HD connector on the rear panel of the
SI-VGAT to one of the 3.5mm min jack audio inputs on the rear panel of the
VP-81KSi.
4. Connect the UXGA OUTPUT 15-pin HD connector on the rear panel of the
SI-VGAT to one of the UXGA inputs on the rear panel of the VP-81KSi.
Product Details
Product Details of the SI-VGAT are shown in Table 2.
Table 2: Product Details
DIMENSIONS:
WEIGHT: 0.3kg (0.66lbs) approx
1 Product details are subject to change without notice
1
of the SI-VGAT UXGA Step-In Commander
12cm x 7cm x 2.5cm (4.9" x 2.8" x 0.98”) W, D, H
SI-VGAT
UXGA Step-In Commander
Installation Instructions
For the latest information on our products and a list of Kramer distributors,
visit our Web site at www.kramerelectronics.com
Kramer Electronics, Ltd.
Web site: www.kramerelectronics.com
E-mail: info@kramerel.com
P/N: 2900-000728 REV 1
Loading...