Kramer Electronics SID-VGA User Manual
The Kramer SID-VGA UXGA Step-In Commander
#
Feature
Function
1
AUDIO INPUT 3.5mm Mini Jack
Connect to the unbalanced stereo audio source
2
UXGA INPUT 15-pin HD Connector
Connect to the VGA video source
3
STEP IN Button
Press to switch the input to this remote control commander. The
button lights when active
4
ON LED
Lights green when the unit receives power
5
LINE OUT Twisted Pair RJ-45
Connector
Connect to the TP input of a compatible switcher (for example,
the VP-81SID) using CAT 6 or higher specification cable
6
Remote Switch Terminal Block
Connections
Connect to the remote step-in switch
7
12V DC Power Connector
Connect to the power adapter
8
Remote LED Terminal Block
Connections
Connect to the remote LED (observe correct polarity as shown
in the graphic)
Congratulations on purchasing your Kramer DigiTOOLS® SID-VGA UXGA Step-In
Commander which is ideal for boardrooms and presentation rooms.
The Kramer SID-VGA is a VGA (up to UXGA) and unbalanced stereo audio remote
control panel that is used to remotely take control of a compatible switcher, for example,
the VP-81SID.
Figure 1 and Table 1 define the SID-VGA UXGA Step-In Commander.
Figure 2 illustrates how to connect the SID-VGA to a source and switcher.
Figure 2: SID-VGA Wiring Connections
To connect the SID-VGA as illustrated in Figure 2:
1. Connect the VGA video source (for example, a computer graphics source) to the
VGA connector on the front panel of the SID-VGA.
2. Connect the unbalanced stereo audio source (for example, a computer graphics
source) to the 3.5mm mini jack AUDIO INPUT connector on the front of the
Figure 1: SID-VGA UXGA Step-In Commander Front and Rear Panel
Table 1: SID-VGA UXGA Step-In Commander Front and Rear Features
SID-VGA.
3. Using STP cable, connect the LINE OUT RJ-45 connector on the rear panel of the
SID-VGA to one of the inputs on the rear panel of the VP-81SID (up to 50m
away).
4. Optional—Connect the terminal block on the rear of the SID-VGA to the remote
switch and LED.
Note: The LED supply includes a current limiting resistor and is designed to work
with any standard LED.
5. Connect the power adapter to the 12V DC connector on the rear of the SID-VGA
and to the mains electricity.
Performing a Phase Calibration
INPUTS:
Video: 1 VGA (up to UXGA) on a 15-pin HD (F) connector
Audio: 1 unbalanced stereo audio on a 3.5mm mini jack
OUTPUT:
TP on an RJ-45 Ethernet connector
STEP-IN COMMANDER
DISTANCE:
50m (164ft) up to 1080p @60Hz
POWER CONSUMPTION:
12V DC, 380mA
OPERATING
TEMPERATURE:
0° to +40°C (32° to 104°F)
STORAGE TEMPERATURE:
–40° to +70°C (–40° to 158°F)
HUMIDITY:
10% to 90%, RHL non-condensing
DIMENSIONS:
12cm x 7cm x 2.4cm (4.7" x 2.76" x 0.94”) W, D, H
WEIGHT:
0.3kg (0.66lbs) approx
ACCESSORIES:
Power supply
P/N:
2900-000712
Rev:
4
In the event that there is noise visible on the picture, you should perform a phase
calibration.
To perform a phase calibration:
1. Press the Step-In button to ensure that the SID-VGA is the active input.
The Step-In button lights.
2. Press and hold the Step-In button.
The phase calibration pattern is displayed.
3. Release the Step-In button as soon as the noise disappears.
Technical specifications
Technical specifications of the SID-VGA are shown in Table 2.
Table 2: Technical specifications1 of the SID-VGA UXGA Step-In Commander
SID-VGA
UXGA Step-In Commander
Installation Instructions
For the latest information on our products and a list of Kramer distributors,
visit our Web site at www.kramerelectronics.com
1 Product details are subject to change without notice
Kramer Electronics, Ltd.
Web site: www.kramerelectronics.com
E-mail: info@kramerel.com
P/N: 2900-000712 REV 4
Loading...