Kramer Electronics SID-DP User Manual
The Kramer SID-DP DisplayPort Step-In Commander
#
Feature
Function
1
AUDIO INPUT 3.5mm Mini Jack
Connect to the unbalanced stereo audio source
2
DP INPUT DisplayPort Connector
Connect to the DP video source
3
STEP IN Button
Press to switch the input to this remote control commander. The
button lights when active
4
ON LED
Lights green when the unit receives power
5
LINE OUT Twisted Pair RJ-45
Connector
Connect to the TP input of a compatible switcher (for example, the
VP-81SID) using CAT 6 or higher specification cable
6
Remote Switch Terminal Block
Connections (pins 2 and 3)
Connect to the remote step-in switch
7
12V DC Power Connector
Connect to the power adapter
8
Remote LED Terminal Block
Connections (pins 1 and 2)
Connect to the remote LED (observe correct polarity, pin 1 to the
LED anode and pin 3 to the cathode)
Congratulations on purchasing your Kramer DigiTOOLS® SID-DP DisplayPort Step-In
Commander which is ideal for boardrooms and presentation rooms.
The Kramer SID-DP is an HDCP compliant DisplayPort and unbalanced stereo audio
remote device that is used to remotely take control of a compatible switcher, for
example, the Kramer VP-81SID. The commander does not need a power adapter if
located within 50m (164ft) of the switcher.
Figure 1 and Table 1 define the SID-DP DisplayPort Step-In Commander.
Figure 1: SID-DP DisplayPort Step-In Commander Front and Rear Panel
Table 1: SID-DP DisplayPort Step-In Commander Front and Rear Panel Features
Figure 2 illustrates how to connect the SID-DP to a source, switcher, and remote switch
and LED.
Figure 2: SID-DP Wiring Connections
To connect the SID-DP as illustrated in Figure 2:
1. Connect the DP video source (for example, a laptop graphics source) to the
DisplayPort connector on the front panel of the SID-DP.
2. Connect the unbalanced stereo audio source (for example, a laptop graphics source)
to the 3.5mm mini jack AUDIO INPUT connector on the front of the SID-DP.
3. Using STP cable, connect the LINE OUT RJ-45 TP connector on the rear panel of
the SID-DP to the required input on the rear panel of the VP-81SID (up to 50m
away).
4. Optional—Connect the terminal block on the rear of the SID-DP to the remote
switch and LED.
Note: The LED supply includes a current limiting resistor and is designed to work
with any standard LED.
5. Connect the power adapter to the 12V DC connector on the rear of the SID-DP and
to the mains electricity (if the distance exceeds 50m (164ft) from the switcher).
Technical Specifications
INPUTS:
Video: DisplayPort
Audio: 3.5mm mini jack
OUTPUT:
TP on an RJ-45 Ethernet connector
STEP-IN COMMANDER
DISTANCE:
50m (164ft)
POWER SOURCE:
12V DC, 230mA
OPERATING
TEMPERATURE:
0° to +40°C (32° to 104°F)
STORAGE
TEMPERATURE:
–40° to +70°C (–40° to 158°F)
HUMIDITY:
10% to 90%, RHL non-condensing
DIMENSIONS:
12.1cm x 7cm x 2.4cm (4.7” x 2.76” x 0.94”) W, D, H
WEIGHT:
0.3kg (0.66lbs) approx
ACCESSORIES:
Power supply
P/N:
2900-000710
Rev:
3
Technical specifications of the SID-DP are shown in Table 2.
Table 2: Technical specifications1of the SID-DP DisplayPort Step-In Commander
SID-DP
DisplayPort Step-In Commander
Installation Instructions
For the latest information on our products and a list of Kramer distributors,
visit our Web site at www.kramerelectronics.com
Kramer Electronics, Ltd.
Web site: www.kramerelectronics.com
1 Product details are subject to change without notice
E-mail: info@kramerel.com
P/N: 2900-000710 REV 3
Loading...